Answered: find the maximum shear stress induced…

find the maximum shear stress induced in a solid circular shaft of diameter 150 mm when the shaft transmits 150 KW power at 150 RPM.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.12.3P: A full quarter-circular fillet is used at the shoulder of a stepped shaft having diameter D2= 1.0...

See similar textbooks

Related questions

Q: Consider a solid steel shaft with an allowable shearing stress of 58 MPa. Design the shaft to…

Q: A motor driving a solid circular steel shaft transmits 40 kW of power at 500 rpm. If the diameter of…

Q: A hollow bronze shaft (G=5000ksi) has an outer diameter of 3in and a wall thickness of 0.25in. The…

A: Given data: Converting all data into SI units. Modulus of rigidity G=5000 ksi=34473.8 Mpa Outer…

Q: Find the shear stress in 10 mm diameter shaft subjected to 2 kW power transmission at 100 rpm.

A: Given data:

Q: A solid circular shaft has a uniform diameter of 2" and is 10 ft long. At its midpoint, 65hp is…

Q: A propeller shaft is required to transmit 45 kW power at 500 rpm. It is a hollow shaft having inside…

A: Given data Power transmitted = 45 kW Speed (N) = 500 rpm Inside dia (d) = 0.6*outside dia(D)…

Q: A line shaft rotating at 320 rpm is to transmit 35 kW power. The allowable shear stress for the…

A: Given Data⇒ Line shaft rotating at (N)=320 rpm Power transmitted (P)=35 KW Allowable shear stress…

Q: A solid shaft in a rolling mill transmits 30kW at 100 rpm. Find the diameter in mm of the shaft so…

Q: A solid circular shaft transmits 75 kW power at 200 rpm. Calculate the diameter of the shaft and the…

Q: Find the required diameter d0 for a solid circle shaft. b) Find the required outer diameter d2 for a…

A: Given: T =1200 NM G=78 GPa Allowable shear stress =40 MPa Allowable rate of twist 0.78/m TO…

Q: A hollow shaft transmits 9 MW at 300 rev/min. It is supposed that the maximum allowable stress is…

A: Given: The power transmitted by the shaft is P=9 MW. The maximum allowable shear stress is ζ=70…

Q: A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 MPa. It is further…

A: Data given- d = 100 mm σaxial = 50 MPa T = 10 kN-m

Q: The driveshaft of an automobile is being designed to transmit 233 kW at 3401 rpm. Determine the…

Q: steel shaft with a diameter of 40 mm and the length of 1.1 m transmits 60 hp from an electric motor…

Q: The hollow ship shaft shown in the figure; It transmits 9880 hp and rotates at 3940 rpm. Since the…

Q: Find the max shear stress in given data of two circular shafts (S) AND (H)

A: GIVEN DATA; Two circular shaft made same material one solid and one hollow both have same length…

Q: PROBLEM 3. A 5-m steel shaft rotating at 1.20 Hz has 72 kW applied at a gear that is 2 m from the…

A: When an object rotate about the point due to the linear force act on the object is known as the…

Q: Q2. A solid circular shaft is subjected to a bending moment of 2500 N-m and a torque of 7 000 N-m.…

A: We will calculate diameter of shaft considering two types of failure: Maximum principal stress…

Q: a hollow shaft for a rotary compressor is to be designed to transmit maximum torque of 4750 n-m. the…

A: Given Data⇒ Hollow shaft Maximum torque : Tmax=4750 N-m Shear stress in shaft : ζ=50 Mpaζ=50×106Pa…

Q: (a) the maximum shear stress in the shaft; and (b) the angle of twist in degrees. Use G =12 x 106…

Q: A 50 mm diameter shaft is transmitting a power of 142.8 HP and is turning at 900 rpm. The shaft is…

A: given data ; diameter = 50 mmpower = 142.8 HP = 142.8 * 746 Wrpm = 900 rpmbending stress =…

Q: B) A wind turbine with an electrical generator rated at 200 k W output. The low speed shaft rotates…

Q: Torsion Problem 6.0 A solid steel shaft is to transmit 5 hp from the motor to which it is attached.…

Q: Lets consider a solid circuar shalt subjected to the torque loads as shown. Determine the minimum…

Q: A motor is driving a solid circular steel shaft transmits 40kW of power at 500 rpm. If the diameter…

Q: A steel marine propeller shaft 13 inches in diameter and 15 ft long is used to transmit 9,426 hp at…

A: GIVEN DATA- D=13in L=15ft P=9426hp N=189rpm G=12*10^6 psi WE HAVE TO FIND SHEAR STRESS

Q: When subject to an applied torque,a circular shaft of length 600mm twists through an angle of 2°,if…

Q: Calculate the torque T: i. if the shear stress of the brass sleeve in section AB is limited to τb =…

A: Shear stress is defined as the intensity of force acting on the cross sectional area. Shear stress…

Q: Consider the case of shafts when subjected to axial loads in addition to combined torsional and…

Q: A Compound Steel (G=80GPA) Shaft consists of a solid 90mm diameter (segment1) and a solid 70mm…

Q: A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 MPa. It is further…

A: Given, Diameter of shaft = d = 100 mm Axial stress = σa = 50 MPa Torque = T = 10 kNm = 10 x 106 Nmm…

Q: The rotation or twist in degrees of a shaft, 800 mm long subjected to a torque of 80 N-m, 20 mm in…

Q: A hollow shaft for a rotary compressor is to be designed to transmit a maximum of torque of 4750…

A: Given Data⇒ Hollow shaft Maximum torque : T=4750 N-m Ratio of inside to outside diameter is :…

Q: A solid shaft is transmitting 15 MW of power at 1760 rpm. If the allowable shear stress must not…

Q: A 100 mm diameter, 10 m long shaft is used to transmit power at 150 rpm. If angle of twist produced…

Q: A hollow shaft for marine applications has outer and inner diameters of 400 mm and 200 mm…

Q: A shaft has an external diameter (ED) of 350 mm and an internal diameter of 150 mm.…

A: Given that, External diameter of shaft, D=350 mm,Internal diamter of shaft, d=150 mm,Length of…

Q: The driveshaft of an automobile is being designed to transmit 234 kw at 3167 rpm. Determine the…

Q: A machine shaft is supported on bearings 1.2 m apart is to transmit 150 kW at 300 rpm while…

A: Given Power, P = 150 kW Speed, N = 300 rpm Shear stress = 50 MPa Find Shaft diameter, d

Q: A solid shaft has to transmit 120 kW of power at 160 rpm. If the shear stress is not to exceed 60…

Q: A flat key is to be designed for 100 mm diameter shaft which will transmit 200kw at 300 rpm . If the…

A: Given: τallow=300 MPaP=200kWN=300 rpmD=100 mmwkey=10 mm

Q: A Solid shaft transmits 600 N.m torque. If the maximum shear stress induced in the shaft is 50…

A: Given Data, T = Torque transmitted by the solid shaft = 600 Nm = 600 x103 Nmm ?max= Maximum shear…

Q: A hollow nickel steel shaft with outside diameter is twice the inside diameter is to transmit 1492…

Q: A solid shaft is transmitting 1MW at 240rpm . Determine the diameter of the shaft if the maximum…

Q: Compute for the induced compressive stress in kPa, of a steel shafting of 59 mm diameter and 954 m…

Q: A circular-closed-tube shaft, with an outer radius of 20 mm and an inner radius of 15 mm, and 650 mm…

Concept explainers

Combined Loading

Any functioning component, such as machine parts, structural members, pressure vessels, and so on, are all under the influence of more than one force. When anybody is under the influence of more than one force such as shear forces, bending moments, axial forces, torsion, and so on, then such body is said to be under combined loading. A very practical example of combined loading is the crankshaft of an internal combustion engine (IC engine). The crankshaft of the IC engine is under high rpm, which is caused due to the torsional forces. Due to the presence of piston, counterbalances, and internal imbalances, the crankshaft experiences lateral forces and due to the rise in temperature, the crankshaft undergoes thermal expansion, which pulls the crankshaft along the axial direction and lateral direction. The presence of unbalanced loads along the periphery of the crankshaft also induces a bending moment.

Question

find the maximum shear stress induced in a solid circular shaft of diameter 150 mm when the shaft transmits 150 KW power at 150 RPM.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The stepped shaft shown in the figure is required to transmit 600 kW of power at 400 rpm. The shaft has a full quarter-circular fillet, and the smaller diameter D1= 100 mm. If the allowable shear stress at the stress concentration is 100 MPa, at what diameter will this stress be reached? Is this diameter an upper or a lower limit on the value of D2?
A propeller shaft for a small yacht is made of a solid steel bar 104 mm in diameter. The allowable stress in shear is 48 MPa, and the allowable rate of twist is 2.0° in 3.5 meters. (a) Assuming that the shear modulus of elasticity is G = 80 GPa, determine the maximum torque that can be applied to the shaft. (b) Repeat part (a) if the shaft is now hollow with an inner diameter of 5d18. Compare values to corresponding values from part (a).
A tubular shaft being designed for use on a construction site must transmit 120 kW at 1,75 Hz, The inside diameter of the shaft is to be one-half of the outside diameter. If the allowable shear stress in the shaft is 45 MPa, what is the minimum required outside diameter d?
What is the maximum power that can be delivered by a hollow propeller shaft (outside diameter 50 mm, inside diameter 40 mm, and shear modulus of elasticity 80 GPa) turning at 600 rpm if the allowable shear stress is 100 MPa and the allowable rate of twist is 3.0°/m?
A motor driving a solid circular steel shaft with diameter d = 1.5 in, transmits 50 hp to a gear at B, The allowable shear stress in the steel is 6000 psi. Calculate the required speed of rotation (number of revolutions per minute) so that the shear stress in the shaft does not exceed the allowable limit.
A thin tubular shaft with a circular cross section (see figure) and with inside diameter 100 mm is subjected to a torque of 5000 N · m. If the allowable shear stress is 42 MPa, determine the required wall thickness t by using (a) the approximate theory for a thin-walled tube and (b) the exact torsion theory for a circular bar.
A stepped shaft ACB having solid circular cross sections with two different diameters is held against rotation at the ends (sec figure). If the allowable shear stress in the shaft is 6000 psi, what is the maximum torque (T0) that may be applied at section C? Find (T0)max if the maximum angle of twist is limited to 0.55º. Let G = 10,600 ksi.
A circular aluminum tube subjected to pure torsion by torques T(sec figure) has an outer radius r2equal to 1.5 times the inner radius r1. (a) If the maximum shear strain in the tube is measured as 400 × 10-6 rad, what is the shear strain y1at the inner surface? (b) If the maximum a1lo-abk rate of twist is 0.125 °/m and the maximum shear strain is to be kept at 400 × 10-6 rad by adjusting the torque T, that is the minimum required outer radius ( r2)Min?
A stepped shaft ABC consisting of two solid, circular segments is subjected to torques T}and T2acting in opposite directions, as shown in the figure. The larger segment of the shaft has a diameter of dv- 2.25 in. and a length Lt= 30 in.; the smaller segment has a diameter d2— 1.75 in. and a length L, = 20 in. The torques are T, = 21,000 lb-in. and fz=10.000 lb-in. (a) Find reaction torque TAat support A. (b) Find the internal torque T(x) at two locations: x = L1/2 and x = L1+ L2/2. Show these internal torques on properly drawn free-body diagrams (FBDs).
A thin-walled rectangular tube has uniform thickness t and dimensions a x b to the median line of the cross section (see figure). How does the shear stress in the tube vary with the ratio = a/b if the total length Lmof the median line of the cross section and the torque T remain constant? From your results, show that the shear stress is smallest when the tube is square (ß = 1).
The propeller shaft of a large ship has an outside diameter 18 in. and inside diameter 12 in,, as shown in the figure. The shaft is rated for a maximum shear stress of 4500 psi. If the shaft is turning at 100 rpm, what is the maximum horsepower that can be transmitted without exceeding the allowable stress? If the rotational speed of the shaft is doubled but the power requirements remain unchanged, what happens to the shear stress in the shaft?
A full quarter-circular fillet is used at the shoulder of a stepped shaft having diameter D2= 1.0 in. (see figure), A torque T = 500 lb-in. acts on the shaft. Determine the shear stress at the stress concentration for values as follows: D1= 0.7,0.8, and 0.9 in. Plot a graph showing versus D?