For a physics lab assignment, a student needs to create a solenoid using copper wire with diameter d = 0.500 mm. The resistance of the solenoid needs to be 3.50 Q and themagnetic field of the solenoid with a current of 3.70 A should be 4.50 x 10-2 T. Assume the resistance does not change significantly with temperature, and the radius of thesolenoid is 1.00 cm. (Use p = 1.70 x 10-8 n : m for the resistivity of copper.)(a) How many turns of wire does the student need?turns(b) Determine the required length (in cm) of the solenoid.cm

The length we get will be in meter =0.0664m We convert it into cm for our final answer.

For a physics lab assignment, a student needs to create a solenoid using copper wire with diameter d = 0.500 mm. The resistance of the solenoid needs to be 3.50 N and the magnetic field of the solenoid with a current of 3.70 A should be 4.50 × 10-2 T. Assume the resistance does not change significantly with temperature, and the radius of the solenoid is 1.00 cm. (Use p = 1.70 x 10-8 0. m for the resistivity of copper.) (a) How many turns of wire does the student need? turns (b) Determine the required length (in cm) of the solenoid. cm

For a physics lab assignment, a student needs to create a solenoid using copper wire with diameter d = 0.500 mm. The resistance of the solenoid needs to be 3.50 N and the magnetic field of the solenoid with a current of 3.70 A should be 4.50 × 10-2 T. Assume the resistance does not change significantly with temperature, and the radius of the solenoid is 1.00 cm. (Use p = 1.70 x 10-8 0. m for the resistivity of copper.) (a) How many turns of wire does the student need? turns (b) Determine the required length (in cm) of the solenoid. cm

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter23: Faraday’s Law And Inductance

Section: Chapter Questions

Problem 48P

See similar textbooks

Similar questions

At what velocity must a conductor 75 mm long cut a magnetic field of flux density 0.6T if an emf of 9V is to be induced in it? Assume the conductor, the field and direction of motion are mutually perpendicular.
A closely wound solenoid of 2000 turns has an axial length of 64 cm and a radius of 2.50 cm. When there is a current of 10.50 A in the solenoid, what is the flux density on the axis (a) at the center and (b) 12 cm away from the right end of the solenoid?
A copper wire (µ = 1.256x10^-6 T-m/A) was used in a solenoid wire of 1000 turns in 20cm of solenoid length in order to generate 2 Tesla of B-field, How much current is required? choices: a. 3.14 mA b. 318.47 A c. 3,184.7 A d. 314 mA
. A solenoid has radius 5.80 mm, length 11.0 cm, 5000 turns, and is placed with its axis of symmetry along the x-axis, through the origin. A vector normal to the opening of the solenoid points to the right. We measure the resistance of the solenoid to be 14.0 Ω. The solenoid is in a region where the temperature is 49.0°C and initially, there is an external magnetic field of 0.30 T in the +x direction. Then the magnetic field is turned off and drops to 0 T over 50.0 milliseconds a. What is the magnitude of the average induced emf during the 50.0 milliseconds while the magnetic field magnitude decreases to 0? b. What is the direction of the induced current, as viewed from the right? Answer clockwise, counterclockwise, or zero and show work or explain in words. c. What is the magnitude of the induced current? d. What is the magnitude and direction of the induced magnetic field?
One type of antenna for receiving AM radio signals is a square loop of wire, 0.15 mm on a side, that has 30 turns
The diameter of the inner conductor of a coaxial cable is 0.5 mm, the inner diameter of the outer conductor is 6 mm, the length is 50m. If the inner and outer conductors of the cable are combined at one end of the cable, the permeability of the insulating material is also 4 * π * 10 ^ (- 7) H / m, what will be the inductance of the cable?
The plane of a conductive loop with an area of 0.020 m^2 is perpendicular to a uniform magnetic field of 0.30 T. If the field drops to zero in 0.0045 s , what is the magnitude of the average emf induced in the loop?
If 47.0 cm of copper wire (diameter = 1.10 mm, resistivity = 1.69 × 10-8Ω·m) is formed into a circular loop and placed perpendicular to a uniform magnetic field that is increasing at the constant rate of 8.88 mT/s, at what rate is thermal energy generated in the loop?
A certain superconducting magnet in the form of a solenoid of length 0.32 m can generate a magnetic field of 7.0 T in its core when its coils carry a current of 70 A. The windings, made of a niobium-titanium alloy, must be cooled to 4.2 K. Find the number of turns in the solenoid.
The induced emf in a single loop of wire has a magnitude of 1.35 V when the magnetic flux ischanged from 0.99 T # m2 to 0.26 T # m2. How much time is required for this change in flux?
A square loop with 5 cm sides is perpendicular to a uniform field 150 mT in intensity. If a third of this flux remains every 0.010 s, what is the average emf induced?
What is the energy density at the center of a circular loop of wire carrying a 26.0 A current if the radius of the loop is 20.0 cm ? How many turns of wire would be required to make a 110 mH inductance out of a 28.0 cm -long air-filled coil with a diameter of 5.0 cm ?