Given four resistors R1 = 100 ohms, R2=250 ohms, R3 = 350 ohms, and R4 = 200 ohms such that R1 and R2 in parallel will be connected in series with R3 and R4 in parallel. The series-parallel combination is connected across a 24-volt DC power supply. Find the voltage across R2 and voltage across R4 voltage drops across R2 and R4 are both 12 V voltage drop across R2 is 8.63 V and voltage across R4 is 15.37 V voltage drop across R2 is 8.63 V and voltage across R4 is 15.37 V voltage drop across R2 is 18.63 V and voltage across R4 is 5.37 V

Given four resistors R1 = 100 ohms, R2=250 ohms, R3 = 350 ohms, and R4 = 200 ohms such that R1 and R2 in parallel will be connected in series with R3 and R4 in parallel. The series-parallel combination is connected across a 24-volt DC power supply. Find the voltage across R2 and voltage across R4 voltage drops across R2 and R4 are both 12 V voltage drop across R2 is 8.63 V and voltage across R4 is 15.37 V voltage drop across R2 is 8.63 V and voltage across R4 is 15.37 V voltage drop across R2 is 18.63 V and voltage across R4 is 5.37 V

University Physics Volume 2

18th Edition

ISBN:9781938168161

Author:OpenStax

Publisher:OpenStax

Chapter9: Current And Resistance

Section: Chapter Questions

Problem 84CP: In this chapter, most examples and problems involved direct current (DC). DC circuits have the...

See similar textbooks

Similar questions

In this chapter, most examples and problems involved direct current (DC). DC circuits have the current flowing in one direction, from positive to negative. When the current was changing, it was changed linearly from I=ImaxtoI=+Imax and the voltage changed linearly from V=Vmax to V=+Vmax where Vmax=ImaxR .Suppose a voltage source is placed in series with a resistor of R = 10 that supplied a current that alternated as a sine wave, for example, I(t)=(3.00A)sin(24.00st) . (a) What would a graph of the voltage drop across the resistor V(t) versus time look like? (b) What would a plot of V(t) versus I(t) for one period look like? (Hint: If you are not sure, try plotting V(t) versus I(t) using a spreadsheet.)
A 2.00- and a 7.50F capacitor can be connected in series or parallel, as can a 25.0- and a 100k resistor.Calculate the four RC time constants possible from connecting the resulting capacitance and resistance in series.
A circuit with three resistors connected in series and parallel connection with a supply DC voltage is shown in the figure. The supply voltage of, Vsupply=120 V, Resistances R1=100, R2 = 200, R3=300 and R4= 400, R6=190 (R5 is not connected). What will be the magnitude of voltage, Vab between a and b?
An RC circuit has a 5.5 kΩ resistor and a 8.0 µF capacitor in series, how long will ittake for the fully discharged capacitor to be charged to 95% once the switch is closed? _______How long would it if a second 8.0 µF capacitor is added in series? _______
Imagine that we had a RC circuit with a 19.2 kilo-ohm resistor connected in parallel with a 16 kilo-ohm resistor and they were connected to two capacitors (404.2 uF, 350.1 uF) that are in series. What is the time constant of this circuit?
If two 20uf capacitors in series were connected to two 1 k ohm resistors in parallel… what would the time constant of this circuit be?
To get the minimum current, the connection should be in series. If you create a series connection with 30V DC source and three resistors with R1 = 50Ω, R2 = 75Ω, and R3 = 100Ω, how do you calculate for the total current (IT) and the current flowing in each resistor (I1, I2, I3), and the total voltage (VT) and the voltage across each resistor (V1, V2, V3)? How do you also determine the power dissipated by each resistor (P1, P2, P3) and by the whole circuit (PT)??
Suppose a resistor R1 is in series with a parallel pair R2; R3. If R1 is 100, R2 is 200, and R3 is 350, what is thecurrent through R1 if the voltage is 3V?
A heart pacemaker is designed to operate at 72 beats/minusing a 6.5µF capacitor in a simple RC circuit. What value ofresistance should be used if the pacemaker is to fire (capacitor discharge) when the voltage reaches 75% of maximumand then drops to 0 V (72 times a minute)?
A circuit with number of resistors connected in series and parallel connection with a supply DC voltage is shown in the figure. The supply voltage of Vsupply =120 V, Resistances, R1=102, R2 - 200, R3=300 and R4= 400, R6=190 (R5 is not connected). What is the value of the voltage drop at R1 in Volts?
In the circuit below, the capacitor starts out uncharged. The resistance is R = 118 Ω, capacitance is C = 0.0647 F, and the battery emf is 16.7 V. What is the charge (Q) on the capacitor at a time of t = 3.72 seconds after the switch is closed?
The capacitor in an RC circuit 1R = 120 Ω, C = 45 mF2 is initiallyuncharged. Find (a) the charge on the capacitor and (b) the current in the circuit one time constant 1t = RC2 after the circuit isconnected to a 9.0-V battery.