h) Determine the buoyant force by the water on the wood:Ni) Determine the force by the wood on the water:Nj) Determine the buoyant force by the water on the metal:Nk) Determine the force by the metal on the water:N1) Determine the upward normal force by the bottom of the container on the metal:Nm) Determine the downward normal force by the metal on the bottom of the container:Nn) How much total weight in water spills over the sides of the container?No) How much total mass in water spills over the sides of the container?p) How much total volume in water spills over the sides of the container?m³ You are given two equal size cubes of wood and metal. They are 0.2 meters on a side. The density of thewood is 633 kg/m³ while that of the metal is 4970 kg/m³. Use g = 9.8 m/s² for these problems.a) Determine the volume of a cube:0.008b) Determine the mass of the wood:5.06439.76c) Determine the mass of the metal:49.630 m³d) Determine the weight force exerted by the Earth on the wood:389.65kgIt floats on the top✓o kge) Determine the weight force exerted by the Earth on the metal:It sinks to the bottomONYou drop both cubes into a large and full container of water. Based on a comparison of their densities tothat of water and perhaps a bit of common sense....f) Determine the location of the wood when it comes to equilibrium:ONg) Determine the location of the metal when it comes to equilibrium:OT

Name: h) Determine the buoyant force by the water on the wood:Ni) Determine
Uploaded: 2024-03-20T06:51:10.000Z
Channel: Bartleby
Description: h) Determine the buoyant force by the water on the wood:Ni) Determine the force by the wood on the water:Nj) Determine the buoyant force by the water on the metal:Nk) Determine the force by the metal on the water:N1) Determine the upward normal forc

Answered: Image /qna-images/answer/b1b07a34-3dee-4a5a-a4cb-3d05d47bb6b5.jpg

Science

Physics

h) Determine the buoyant force by the water on the wood: N i) Determine the force by the wood on the water: N j) Determine the buoyant force by the water on the metal: N k) Determine the force by the metal on the water:

h) Determine the buoyant force by the water on the wood: N i) Determine the force by the wood on the water: N j) Determine the buoyant force by the water on the metal: N k) Determine the force by the metal on the water:

Physics for Scientists and Engineers, Technology Update (No access codes included)

9th Edition

ISBN:9781305116399

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter14: Fluid Mechanics

Section: Chapter Questions

Problem 14.13OQ: Rank the buoyant forces exerted on the following five objects of equal volume from the largest to...

See similar textbooks

Similar questions

A solid iron sphere and a solid lead sphere of the same size are each suspended by strings and are submerged in a tank of water. (Note that the density of lead is greater than that of iron.) Which of the following statements are valid? (Choose all correct statements.) (a) The buoyant force on each is the same. (b) The buoyant force on the lead sphere is greater than the buoyant force on the iron sphere because lead has the greater density. (c) The tension in the siring supporting the lead sphere is greater than the tension in the string supporting the iron sphere. (d) The buoyant force on the iron sphere is greater than the buoyant force on the lead sphere because lead displaces more water. (e) None of those statements is true.
A hot-air balloon consists of a basket banging beneath a large envelope filled with hot air. A topical hot-air balloon has a total mass of 545 kg. including passengers in its basket, and holds 2.55 103 m3 of hot air in its envelope. If the ambient air density is 1.25 kg/m3, determine the density of hot air inside the envelope when the balloon is neutrally buoyant. Neglect the volume of air displaced by the basket and | passengers.
A 1.00-kg beaker containing 2.00 kg of oil (density = 91(5.0 kg/m3) rests on a scale. A 2.00-kg block of iron suspended from a spring scale is completely submerged in the oil as shown in Figure P14.71. Determine the equilibrium readings of both scales.
An iron block of volume 0.20 m5 is suspended from a spring scale and immersed in a flask of water. Then the iron block is removed, and an aluminum block of the same volume replaces it. (a) In which case is the buoyant force the greatest, for the iron block or the aluminum block? (b) In which case does the spring scale read the largest value? (c) Use the known densities of these materials to calculate the quantities requested in parts (a) and (b). Are your calculations consistent with your previous answers to parts (a) and (b)?
A beach ball is made of thin plastic. It has been inflated with air, but the plastic is not stretched. By swimming with fins on, you manage to take the ball from the surface of a pool to the bottom. Once the ball is completely submerged, what happens to the buoyant force exerted on the beach ball as you take it deeper? (a) It increases. (b) It remains constant. (c) It decreases. (d) It is impossible to determine.
Calculate the maximum force in newtons exerted by the blood on an aneurysm, or ballooning, in a major artery, given the maximum blood pressure for this person is 150 mm Hg and the effective area of the aneurysm is 20.0 cm2. Note that this force is great enough to cause further enlargement and subsequently greater force on the ever-thinner vessel wall.
Old Faithful geyser in Yellowstone Park erupts at approximately 1-hour intervals, and the height of the fountain reaches 40.0 m (Fig. P9.47). (a) Consider the rising stream as a series of separate drops. Analyze the free-fall motion of one of the drops to determine the speed at which the water leaves the ground. (b) Treat the rising stream as an ideal fluid in streamline flow. Use Bernoullis equation to determine the speed of the water as it leaves ground level. (c) What is the pressure (above atmospheric pressure) in the heated underground chamber 175 m below the vent? You may assume the chamber is large compared with the geyser vent.
A hypodermic syringe contain a medicine with the density of water (Fig. P9.37). The barrel of the syringe has a cross-sectional area of in the absence of a force on the plunger, the pressure everywhere is 1.00 atm. A force F of magnitude 2.00 N is exerted on the plunger, making medicine squirt from the needle. Determine the medicines How speed through the needle. Assume the pressure in the needle remains equal to 1.00 atm and that the syringe is horizontal. Figure P9.37
A hypodermic syringe contain a medicine with the density of water (Fig. P9.37). The barrel of the syringe has a cross-sectional area of in the absence of a force on the plunger, the pressure everywhere is 1.00 atm. A force F of magnitude 2.00 N is exerted on the plunger, making medicine squirt from the needle. Determine the medicines How speed through the needle. Assume the pressure in the needle remains equal to 1.00 atm and that the syringe is horizontal. Figure P9.37
Old Faithful geyser in Yellowstone Park erupts at approximately 1-hour intervals, and the height of the fountain reaches 40.0 m (Fig. P9.47). (a) Consider the rising stream as a series of separate drops. Analyze the free-fall motion of one of the drops to determine the speed at which the water leaves the ground. (b) Treat the rising stream as an ideal fluid in streamline flow. Use Bernoullis equation to determine the speed of the water as it leaves ground level. (c) What is the pressure (above atmospheric pressure) in the heated underground chamber 175 m below the vent? You may assume the chamber is large compared with the geyser vent.
A beaker of mass mb containing oil of mass mu and density pa rests on a scale. A block of iron of mass mFe suspended from a spring scale is completely submerged in the oil as shown in Figure P14.71. Determine the equilibrium readings of both scales.
. A dentist's chair with a person in it weighs 1900 N. The output plunger of a hydraulic system starts Do lift the chair when the dental assistant's foot exerts a force of 45 N on the input piston. Neglecting any difference in the heights of the piston and the plunger, what is the ratio of the area of the plunger to the area of the piston?