Answered: hat can be lifted if the output piston…

Name: The plunger of the hydraulic lift in a gasoline service station has a
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: The plunger of the hydraulic lift in a gasoline service station has a diameter of 1 inch. It is operated by a compressed air (density = 63 kg/m3) from the tank in which the pressure is 9.315 x 105 pascals. The output piston and the rack on which the

Engineering

Mechanical Engineering

hat can be lifted if the output piston has a diameter of 1 foot? Assume 80% efficiency of the machine.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.113P: Calculate the resultant force caused by the water acting on the parabolic arch dam. The water levels...

See similar textbooks

Similar questions

The weight of the cylindrical tank is negligible in comparison to the weight of water it contains (water weighs 62.4lb/ft3). The coefficient of static friction between the tank and the horizontal surface is s. (a) Assuming a full tank, find the smallest force P required to tip the tank, and the smallest s that would allow tipping to take place. (b) If the force P = 200 lb initiates tipping, determine the depth of water in the tank.
Two pistons of a hydraulic lift have diameters of 4 m and 2 m. What is the force exerted by the larger piston when 100 N is placed on the smaller piston?
Make it short and simple. [1] A gas is contained in a vertical, frictionless piston-cylinder device. The piston has a mass of 6 kg and cross-sectional area of 30 cm2. A compressed spring above the piston exerts a force of 50 N on the piston. If the atmospheric pressure is 99 kPa, determine the pressure inside the cylinder.
A glass-walled fish tank is 2 ft wide by 6 ft long by 3ft deep. When the water (y = 62.4 lb /ft^3) in the tank is 2.5 ft deep, determine the magnitude of the resultant force R exerted on a 2- by 3-ft end plate by the water pressure and the distance from the water surface to the center of pressure.
A pudding truck carries pudding with a density of 67.55 lb/ft! in a horizontal cylindrical tank with a diameter of 6 ft. Find the force exerted by the milk on one end of the tank when the tank is half full.
A bicycle tire pump has a piston with area 0.44 inches squared. If a person exerts a force of 30 lb on the piston while inflating the tire, what pressure does this produce on the air in the pump? Give your answer in psi.
For the tank of water shown below, the radius of the circular surface is R=1.0 m, h=1.0m, and the length of the tank is w=2.0 m. Determine (1) the correct expression of the area magnitude whose volume weight is equivalent to the vertical force exerted on the whole curved surfaces_________ A. B. C. D.
An open horizontal tank 3 m high, 3.5 m wide and 6 m long is initially filled at 2 m of water. a. Determine the required acceleration in m/s2 so that no water will be spilled? b. Determine the required acceleration m/s2 so that 1/3 of the initial volume of water will be spilled. c. Determine the remaining volume in cu.m. if it accelerated at 7 m/s^2. d. Determine the minimum hydrostatic force in kN at the side of the tank if 2/3 of the initial volume will be spilled. e. Determine the maximum hydrostatic force in kN at the side of the tank if it accelerates at 3 m/s^2
For the tank of water shown below, the radius of the circular surface is R=1.0 m, h=1.0m, and the length of the tank is w=2.0 m. Determine (1) the correct expression of the area magnitude whose volume weight is equivalent to the vertical force exerted on the whole curved surfaces_________
What is the pressure inside a tank 24 in. in diameter and 36 in. long if 20 cubic feet of air are stored in it? What is the compression ratio? What is the pressure value displayed by the manometer? Answer pressure=31.2 psi, compression ratio=2.12, pressure rating=16.5 psig
A fan with 22-in-diameter blades moves 1800 cfm (cubic feet per minute) of air at 70°F at sea level. Determine the following: The force required to hold the fan. The minimum power input required for the fan Choose a control volume sufficiently large to contain the fan, with the inlet sufficiently far upstream so that the gage pressure at the inlet is nearly zero. Assume air approaches the fan through a large area with negligible velocity and air exits the fan with a uniform velocity at atmospheric pressure through an imaginary cylinder whose diameter is the fan blade diameter.
A closed tank whose bottom is 18 inches in diameter is filled with three liquids: 12 inches of carbon tetrachloride (SG=1.59), 4 inches of water and 2 inches of syrup (SG=1.31). The air chamber in the tank is pressurized at 9 psi. Illustrate the problem before solving. a. Determine the pressure at the interface of water and syrup. b. Determine the difference in pressure between the interface of water and syrup and the interface of carbon tetrachloride and syrup. c. Compute the hydrostatic pressure (in psi) acting at the bottom of the tank. d. Apply the PANEL EQUATIONS to determine the magnitude, direction and location of the total hydrostatic force acting at the bottom of the tank. Round off ONLY the final result to three decimal places as applicable. Indicate an appropriate unit for each of your final answers.