Heat Transfer A wall of an oven with a wire in it. Across the wire a voltage of 50 Volts and a current of 2 Amps is applied, and 80% of the electrical power is converted to thermal energy. The oven is a convection oven and has air flowing through it at 240 C and h = 10 W/m^2 K. The wall of the oven is 0.1 m thick and 1.5 m tall and 1.5 m wide and is made of steel (k = 15 W/m K). Find the surface energy balance on the inner wall of the oven and determine the temperature of the ineer wall at steady state. Then do an energy balance on the outer wall, assume that the oven is free standing and has an emissivity, e = 0.6, and the surrounding temperature is 25 C. The air in the surrounding has a convective heat transfer coefficient of 25 W/m^2 K. Just set up the balance equation that would enable to solve, no need to actually solve.

Heat Transfer A wall of an oven with a wire in it. Across the wire a voltage of 50 Volts and a current of 2 Amps is applied, and 80% of the electrical power is converted to thermal energy. The oven is a convection oven and has air flowing through it at 240 C and h = 10 W/m^2 K. The wall of the oven is 0.1 m thick and 1.5 m tall and 1.5 m wide and is made of steel (k = 15 W/m K). Find the surface energy balance on the inner wall of the oven and determine the temperature of the ineer wall at steady state. Then do an energy balance on the outer wall, assume that the oven is free standing and has an emissivity, e = 0.6, and the surrounding temperature is 25 C. The air in the surrounding has a convective heat transfer coefficient of 25 W/m^2 K. Just set up the balance equation that would enable to solve, no need to actually solve.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter2: Steady Heat Conduction

Section: Chapter Questions

Problem 2.32P

See similar textbooks

Similar questions

3.16 A large, 2.54-cm.-thick copper plate is placed between two air streams. The heat transfer coefficient on one side is and on the other side is . If the temperature of both streams is suddenly changed from 38°C to 93°C, determine how long it takes for the copper plate to reach a temperature of 82°C.
1.60 Two electric resistance heaters with a 20 cm length and a 2 cm diameter are inserted into a well-insulated 40-L tank of water that is initially at 300 K. If each heater dissipates 500 W, what is the time required for bringing the water temperature in the tank to 340 K? State your assumption for your analysis.
Heat is transferred at a rate of 0.1 kW through glass wool insulation (density=100kg/m3) with a 5-cm thickness and 2-m2 area. If the hot surface is at 70C, determine the temperature of the cooler surface.
Determine the rate of heat transfer per meter length to a light oil flowing through a 2.5-cm-ID, 60-cm-long copper tube at a velocity of 0.03 m/s. The oil enters the tube at 16C, and the tube is heated by steam condensing on its outer surface at atmospheric pressure with a heat transfer coefficient of 11.3 kW/m K. The properties of the oil at various temperatures are listed in the following table: Temperature, T(C) 15 30 40 65 100 (kg/m3) 912 912 896 880 864 c(kJ/kgK) 1.80 1.84 1.925 2.0 2.135 k(W/mK) 0.133 0.133 0.131 0.129 0.128 (kg/ms) 0.089 0.0414 0.023 0.00786 0.0033 Pr 1204 573 338 122 55
1.19 A cryogenic fluid is stored in a 0.3-m-diameter spherical container is still air. If the convection heat transfer coefficient between the outer surface of the container and the air is 6.8 , the temperature of the air is 27°C, and the temperature of the surface of the sphere is –183°C, determine the rate of heat transfer by convection.
A cooling system is to be designed for a food storage warehouse for keeping perishable foods cool prior to transportation to grocery stores. The warehouse has an effective surface area of 1860 m2 exposed to an ambient air temperature of 32C. The warehouse wall insulation (k=0.17W/(mK)) is 7.5 cm thick. Determine the rate at which heat must be removed (W) from the warehouse to maintain the food at 4C.
3.17 A 1.4-kg aluminum household iron has a 500-W heating element. The surface area is . The ambient temperature is 21°C, and the surface heat transfer coefficient is . How long after the iron is plugged in does its temperature reach 104°C?
A plane wall, 7.5 cm thick, generates heat internally at the rate of 105 W/m3. One side of the wall is insulated, and the other side is exposed to an environment at 90C. The convection heat transfer coefficient between the wall and the environment is 500 W/m2 K. If the thermal conductivity of the wall is 12 W/m K, calculate the maximum temperature in the wall.
2.2 A small dam, which is idealized by a large slab 1.2 m thick, is to be completely poured in a short Period of time. The hydration of the concrete results in the equivalent of a distributed source of constant strength of 100 W/m3. If both dam surfaces are at 16°C, determine the maximum temperature to which the concrete will be subjected, assuming steady-state conditions. The thermal conductivity of the wet concrete can be taken as 0.84 W/m K.
1.67 In beauty salons and in homes, a ubiquitous device is the hairdryer. The front end of a typical hairdryer is idealized as a thin-walled cylindrical duct with a 6-cm diameter with a fan at the inlet that blows air over an electric heating coil as schematically shown in the figure. The design of this appliance requires two power settings, with which the air blown over the electric heating coil is heated from the ambient temperature of to an outlet temperature of and with exit air velocities of 1.0 m/s and 1.5 m/s. Estimate the electric power required for the heating coil to meet these conditions, assuming that heat loss from the outside of the dryer duct is neglected.
A mild-steel cylindrical billet 25 cm in diameter is to be raised to a minimum temperature of 760C by passing it through a 6-m long strip-type furnace. If the furnace gases are at 1538C and the overall heat transfer coefficient on the outside of the billet is 68W/m2K, determine the maximum speed at which a continuous billet entering at 204C can travel through the furnace.
Steam passes into tubes in a heating system whose outer diameter is 3 cm and whose wall is held at a temperature of 120°C. Tubes are connected to circular aluminium alloy fins (k = 180 W/m. ° C) with an outer diameter of 6 cm and a constant thickness of 2 mm. The distance between the two fins is 3 mm and the tube length is 200 fins per meter. With h = 60 W/m2.°C, the heat is transmitted to the ambient air at 25°C. Evaluate the increase in heat transfer from the tube per meter of its length as a result of adding fins.