In a production facility, 1.2-in-thick, 2-ft × 2-ft square brass plates (ρ = 532.5 lbm/ft3 and cp = 0.091 Btu/lbm·°F) that are initially at a uniform temperature of 75°F are heated by passing them through an oven at 1300°F at a rate of 450 per minute. If the plates remain in the oven until their average temperature rises to 1000°F, determine the rate of entropy generation associated with this heat transfer process.

Q: In a food processing industry, steam and water are mixed to produce a continuous supply of hot…

A: Given data: m1=13 kg/sh1=50 kJ/kgm2=2 kg/sh2=2670 kJ/kgQloss=780 W Need to determine the temperature…

Q: Consider a classroom that is losing heat to the outdoors at a rate of 12,000 kJ/h. If there are 40…

A: Given, Qout = 12,000 kJ/h = 12,000/(3600) kJ/Sec = 3.33 kJ/Sec= 3.3 kW Heat Generated by…

Q: Nitrogen gas is compressed from 80 kPa and 27°C to 480 kPa by a 10-kW compressor. Determine the mass…

A: Given: The initial pressure of the nitrogen gas in the compressor is P1=80 kPa The final pressure of…

Q: In a production facility, 1.2-in-thick, 2-ft × 2-ft square brass plates (ρ = 532.5 lbm/ft3 and cp =…

A: Given data

Q: Water is contained in a closed rigid tank at an initial pressure of 1200 kPa. Heat transfer occurs…

A: Given data: -  The initial pressure is P1 = 1200 kPa. The final pressure is P2 = 7 MPa. The mass of…

Q: 10-kg of R-134a fill a 1.348-m3 rigid container at an initial temperature of -40 degree Celsius. The…

A:

Q: Argon is heated at 350 K with a mass flow of 4 kg/s as it passes through a pipe. Given that the heat…

A:

Q: 2. During some actual expansion and compression processes in piston-cylinder devices, the gases have…

A:

Q: 6. 2 kg/sec of air has a decrease of internal energy of 25 KJ while its Centigrade temperature is…

A:

Q: What is the maximum volume that 3 kg of oxygen at 950 kPa and 373°C can be adiabatically expanded to…

A:

Q: Refrigerant-134a at 140 kPa and –10°C is compressed by an adiabatic 1.3-kW compressor to an exit…

A: The properties of refrigerant-134a at 140 kPa and -10 degree centigrade temperature are taken from…

Q: Air enters an adiabatic nozzle steadily at 300 Kpa, 200 °C and 30 m's then leaves at 100 Kpa and 180…

A:

Q: Air is compressed by an adiabatic compressor from 100 kPa and 12°C to a pressure of 800 kPa at a…

A: Given Data: The inlet pressure is P1 = 100 kPa. The inlet temperature is T1 = 12°C. The exit…

Q: A cylinder fitted with a piston has a volume 0.1 m3 and contains 0.5 kg of steam at 500 kPa. How…

A:

Q: Carbon dioxide gas enters a pipe at a pressure of 3.7 MPa and a temperature of 496 K at a flow rate…

A: given data;pressure (P)=3.7MPa=3.7*106Patemperature (T)=496K carbon dia oxide (CO2) mass flow rate…

Q: 240.C steam expands isentropically from 1.5 MPa to 150 kPa. Determine the work done per unit mass of…

A:

Q: Saturated liquid water is heated in a steady-flow steam boiler at a constant pressure of 2 MPa at a…

A: Given data: Inlet pressure ,P1 = 2 MPa Outlet temperature, T2 = 2500C Mass flow rate, m = 4 kg/s Now…

Q: Can a steady-flow system involve boundary work?

A: Steady flow system- In the case of steady flow system, the fluid properties does not vary with…

Q: Air is expanded in an adiabatic turbine of 85 percent isentropic efficiency from an inlet state of…

A: Given data as per question Isentropic efficiency =85% Inlet pressure = 2200 kpa Inlet temperature =…

Q: Steam enters an adiabatic turbine steadily at 6 MPa and 450 °C and leaves at 500 kPa and 250 °C. If…

A: Given Data Inlet temperature of steam is : T1=450°C Initial pressure of steam is : P1=6 MPa=6000…

Q: Refrigerant-134a enters an adiabatic compressor as saturated vapor at 100 kPa at a rate of 0.7…

A: Given data: *The saturated vapour pressure of the refrigerant is P=100 kPa. *The flow rate of the…

Q: In a production facility, 1.6-in-thick 2-ft × 2-ft square brass plates (ρ = 532.5 lbm/ft3 and cp =…

A: Given Data: The thickness of plate is t = 1.6 in. The area of plate is A = 2-ft × 2-ft. The density…

Q: Steam expands in a turbine steadily at a rate of 18,000 kg/h, entering at 7 MPa and 600°C and…

A: Given: mass flow rate(m) =18000 kg/h = 5kg/sP1=7MPa =7×106 PaT1=600°C=873 KP2=50 kPaSurrounding…

Q: Steam enters a turbine at 6 MPa and 450°C at a rate of 33 kg/s and exits at 50 kPa as saturated…

A:

Q: A rigid tank is divided into two equal parts by a partition. One part of the tank contains 3 kg of…

A:

Q: The decrease in internal energy of 3 lb of an ideal gas is 325 BTU when the pressure decreases from…

A: Internal Energy: The energy that is associated with the random and disordered motion of the…

Q: a throttling steam calorimeter is an instrument used for the determination of the quality of wet…

A: P1= 200 psiaP2= 15 psiaT2= 300 FProcess 1-2: Throttling process

Q: Liquid water at 200 kPa and 20 degress celcius is heated in a chamber by mixing it with superheated…

A: Draw the schematic diagram of the mixing chamber as shown in Figure (1).

Q: On a P-v diagram, what does the area under the process curve represent?

A: In the P-V diagram, the area under the process curve represents the work done by the gas.

Q: Ten grams of computer chips with a specific heat of 0.3 kJ/kg·K are initially at 20°C. These chips…

A: Entropy is defined as the degree of randomness of a molecule and the entropy change of the…

Q: A water stream at 1 MPa and 160°C is mixed with another stream at 1 MPa and 300°C. If the mass flow…

A: To solve the given question, energy conservation will be applied. The change in enthalpy of the…

Q: Is it possible for the entropy change of a closed system to be zero during an irreversible process?…

A: No,it is not possible for the entropy change of a closed system to be zero during an irreverisible…

Q: Saturated refrigerant-134a vapor at 15 psia is compressed reversibly in an adiabatic compressor to…

A: Given data P1=15 psiaP2=80 psia

Q: 2 kg of air at 298 K and 120 kPa inside a piston cylinder device is heated to 860 K in an isochoric…

A: Given Data M= 2 kg T1= 298 K T2=860 K T3=1200 K

Q: A 0.06-m3 rigid tank initially contains refrigerant- 134a at 0.8 MPa and 100 percent quality. The…

A:

Q: A 200-m3 rigid tank contains compressed air at 1 MPa and 300 K. Determine how much work can be…

A:

Q: Refrigerant-134a enters an adiabatic compressor as saturated vapor at 100 kPa at a rate of 0.7 m3…

A: The pressure of the saturated vapour at the inlet of the compressor is P1=100 kPa. The volume flow…

Q: A long roll of 2-m-wide and 0.5-cm-thick 1-Mn manganese steel plate (ρ = 7854 kg/m3 and cp = 0.434…

A:

Q: Air is compressed by an adiabatic compressor from 100 kPa and 12°C to a pressure of 800 kPa at a…

A: At state 1 P1=100Kpa T1=12°C At state 2 P2=800Kpa T2=?

Q: Air enters an adiabatic nozzle steadily at 300 kPa, 200°C, and 30 m/s and leaves at 100 kPa and 180…

A:

Q: A 5-ft3 rigid tank initially contains refrigerant-134a at 60 psia and 100 percent quality. The tank…

A: Given data:

Q: Carbon dioxide is compressed in a reversible, isothermal process from 100 kPa and 20°C to 400 kPa…

A: Given data: The initial pressure is Pi = 100 kPa. The final pressure is  Pf = 400 kPa. The…

Q: Argon gas enters an adiabatic compressor at 14 psia and 75°F with a velocity of 60 ft/s, and it…

A: Given Data⇒P1=14 PsiaP2=200 PsiaT1=75°F Data Assumption⇒ for argon assume γ=1.667

Q: Refrigerant-134a enters an adiabatic compressor as saturated vapor at 30 psia at a rate of 20 ft3…

A:

Q: A long roll of 2-m-wide and 0.5-cm-thick 1-Mn manganese steel plate (ρ = 7854 kg/m3 and cp = 0.434…

A: