I.In an air conditioning unit, 3.5 m³/s of air at 27°C dry bulb temperature50%RH at 100.325 kPa barometric condition enters the Airconditioned Unit (ACU).The leaving condition of the air is 13°C dry bulb and 90% RH.Determine:a. Sensible Heat that was being removed/ added from the ACU?b. Moisture that is being removed/added from the air leaving ACU?

Answered: Image /qna-images/answer/d68d04e8-2325-41a3-bbe8-b6f5f4f98bce.jpg

In an air conditioning unit, 3.5 m³/s of air at 27°C dry bulb temperature %RH at 100.325 kPa barometric condition enters the Airconditioned Unit (ACU). e leaving condition of the air is 13°C dry bulb and 90% RH. Determine: a. Sensible Heat that was being removed/ added from the ACU? b. Moisture that is being removed/added from the air leaving ACU?

In an air conditioning unit, 3.5 m³/s of air at 27°C dry bulb temperature %RH at 100.325 kPa barometric condition enters the Airconditioned Unit (ACU). e leaving condition of the air is 13°C dry bulb and 90% RH. Determine: a. Sensible Heat that was being removed/ added from the ACU? b. Moisture that is being removed/added from the air leaving ACU?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Saturated ambient air with a DB of 8°C and a mass flow rate of 0.98 kg/s is divided into two streams. One stream passes through a heating section and leaves it with an RH of 30%. The conditions of the other stream that bypasses the heater remains unchanged. The two streams are then adiabatically mixed to produce the supply air stream at 22°C. The pressure is constant at 101.3 kPa. -Determine the partial pressure of water vapor (in kPa) of the heated air (Hint: sensible heating process).-Determine the mass flow of air that bypassed the heater in kg/s.-Determine the heat input by the heating coil in kW.
A single effect evaporator was used to concentrate 10000 kg / hr of tomato juice from 5% total solids to 30% total solids. The juice enters the evaporator at 25 ° C. The evaporator is operated on Steam (85% quality) at 143.27 kPa. The vacuum in the evaporator allows the juice to boil at 75 ° C. The specific heat of the dilute material is 4.1 kJ / (kg ° C) and the concentrate product is 3.1 kJ / (kg ° C). a. Steam demand rate = kg / hour. b. Steam economy when condensate temperature is released at 75 ° C. = (kg of water evaporated / kg of steam)
What is the maximum filtering velocity for chocolate, grains and leather fumes in Pulse-Jet Baghouses?
15m3/sofmoistairat45Cdb,31Cwbandpassesthroughairwasher. If the saturation efficiency is 90%. Determine the air state at the outlet of the air washer.
Thermodynamics Question: Refrigerant – 134a is to be cooled by water in a condenser. The refrigerant enters the insulated condenser with a mass flow rate of 6 kg/min at 1 MPa, 70 oC and leaves at 35 oC. The cooling water (compressed liquid) enters at 300 kPa and 15 oC and leaves at 25 oC. Neglecting any pressure drops, kinetic and potential energy changes in the pipes, determine (a) the mass flow rate of the cooling water required and (b) the heat transfer rate from the refrigerant to water.
Thermodynamics Refrigerant R-134a to the compressor of a refrigeration machine It enters at 140 kPa pressure and -10 °C, and exits at 1 MPa pressure. Volumetric flow of the refrigerant entering the compressor It is 0.23 m³/minute. The refrigerant enters the throttling valve at a pressure of 0.95 MPa and at 30 °C, and exits the evaporator as saturated steam at -18 °C. Adiabatic efficiency of the compressor It is 78%. Show the cycle in the T-s diagram. And; a) Calculate the power required to run the compressor. b) Calculate the heat absorbed per unit time from the cooled medium. ( COPSM=? ) c) Calculate, between the evaporator and the compressor, how much the pressure of the refrigerant drops and how much the heat gain.
21 - The mass flow rate of water entering a turbine is 17.7 kg/s and its enthalpy is 3817.2 kJ/kg. The water exits the turbine as wet steam at a pressure of 100 kPa with a dryness degree of 0.92. What is the power produced in the turbine? a) 23413.4 kW B) 15476.6 kW NS) 13951.5 kW D) 11802.9 kW TO) 20271.5 kW
Air at dry-bulb temperature of 75°F and wet-bulb temperature of 65°F is heated to 250°F and fed to a dryer. If the air leaves the dryer 50% saturated and if the dryer operation is adiabatic, obtain the water evaporated in the dryer per 100 pound dry airA. 0.22B. 10.4C. 3.05D. 5.94
Air behaving as an ideal gas enters a compressor followed by a constant pressure heat exchanger with the properties and volume flow rate listed in the figure. Do NOT assume constant specific heats. If the compressor has an isentropic efficiency of 83%, determine: a) The mass flow rate through the system (lbm/s) b) The temperature at the compressor exit (Rankines) c) The power input to the compressor per unit mass of air flowing through the system (Btu/lbm) d) The heat transfer rate per unit mass in the heat exchanger (Btu/lbm)
5. The cooled water from a cooling tower returns to the condenser at 21°C at a mass flow rate of 54.4 kg/s. The air entering at state 1 has h₁ = 47.7 kJ/kg da and w₁ = 0.006 kg v/kg da. The air leaving the cooling tower at state 2 has h₂ = 116.5 kJ/kg da and w₂ = 0.027 kg v/kg da. The makeup water is supplied at 25°C and the mass flow rate of dry air is 54.4 kg da/s. What is the temperature of the warm water entering the tower? Express your answer in °C.
An industrial dehumidifier accepts 50 kmol/hour of moist air with a dewpoint of 20 degrees Celsius. Conditioned air leaving the dehumidifier has a dewpoint temperature of 10 degrees Celsius. At what rate (kg/hour) is liquid water removed in this steady-flow process? Assume P is constant at 1 atm.
22 - The volumetric flow rate of the refrigerant R-134a entering a compressor at 140 kPa pressure and – 10ºC temperature is 1.23 m³/min. What is the mass flow rate of R-134a? a) 0.1229 kg/h B) 0.7376 kg/h NS) 0.1404 kg/h D) 0.6804 kg/h TO) 0.1134 kg/h