In the fluorination reaction of butadiene, the butadiene is adsorbed onto a catalyst C. To test the efficiency of the adsorption, the adsorption isotherm was determined. The volume of butadiene per gram of C varied as follows at constant temperature: p( kPa)- 13.3; 26.7 ; 40.0 ; 53.3 ; 66.7 ; 80.0 V(cm3)-17.9 ; 33.0 ; 47.0 ; 60.8 ;75.3 ; 91.3 At the temperature used, p* for butadiene is 200 kPa. Find a suitable isotherm for the data and determine Vmon. please assist.

In the fluorination reaction of butadiene, the butadiene is adsorbed onto a catalyst C. To test the efficiency of the adsorption, the adsorption isotherm was determined. The volume of butadiene per gram of C varied as follows at constant temperature: p( kPa)- 13.3; 26.7 ; 40.0 ; 53.3 ; 66.7 ; 80.0 V(cm3)-17.9 ; 33.0 ; 47.0 ; 60.8 ;75.3 ; 91.3 At the temperature used, p* for butadiene is 200 kPa. Find a suitable isotherm for the data and determine Vmon. please assist.

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter34: Miscellaneous Separation Methods

Section: Chapter Questions

Problem 34.19QAP

See similar textbooks

Similar questions

please help me answer my assignment. thanks the rate constants (k) for the leaching of galena in an aqeous medium containing ammonium acetate under oxygen pressure at the different temperature are listed below: log K -10.9 -11.1 -11.2 -11.5 -12.1 -12.6 1/t x10^3 2.30 2.35 2.38 2.45 2.61 2.76 where k and T are expressed in mole^2/cm/min and K respectively. Calculate the activation energy of the leaching process
In this table the Kr volume adsorbed on an active carbon surface are given, as a function of the pressures, at 193.5 K. a) Does this data fit well to a Langmuir isotherm? If yes, determine vm and b.
Benzene on graphite follows the Langmuir isotherm. At a pressure of 1 atm, theThe volume of benzene adsorbed on a sample of graphite was 4.2 mm3 atconditions T = 0°C and 1 atm. At 3 atm it was 8.5 mm3. Suppose 1 molecule ofbenzene occupies 30Å and estimate the surface area of graphite.
Confirm that the following CO adsorption data on activated carbon at 273 Kfollow the Langmuir or Freundlich isotherm and determine the volumecorresponding to the complete coverage of the surface.
The average time for which an oxygen atom remains adsorbed to a tungsten surface is 0.36 s at 2548 K and 3.49 s at 2362 K. What is the activation energy for desorption?
Effect of dose on adsorption percentage of cadmium onto magnetite (pH 7; adsorbent dose = 0.05, 0.1, 0.5, 0.10, 0.15 g; initial concentration 100 ppm, T = 25°C, 150 rpm, Contact Time = 2 h) performed with ASS instrument. What is the optimal dosage?
What is the difference between effect of pH and Point of zero charge with regards to Adsorption
A solid in contact with a gas at 12 kPa and 25 °C adsorbs 2.5 mg of the gas and obeys the Langmuir isotherm. The enthalpy change when 1.00 mmol of the adsorbed gas molecules is desorbed is +10.2 J. What is the equilibrium pressure for the adsorption of 2.5 mg of gas at 40°C? Hint: The data are isosteric; use a similar approach to that in Example 19B.2.
An enzyme-catalyzed reaction has a Km of 1.4 mM and a Vmax of 7 nM/s. What is the initial velocity when the substrate concentration is 0.6 mM?
The first-order degradation rate constant k was determined to be 0.0125/day for contaminant A and 0.0030/day for contaminant B in a soil. Calculate the half-life T1/2 and the 95% dissipation time for these contaminants in the soil. Compare the persistence between the two contaminants.
The following data were obtained for the adsorption of acetone on charcoal from an aqueous solution at 180C. Y (millimoles/g) C (millimoles/liter) 0.208 2.34 0.618 14.65 1.075 41.03 1.5 88.62 2.08 177.69 2.88 268.97 a) Find the constants k and n of the Freundlich equation. b) Find the constants a and b in the Langmuir equation. c) Find the constants k and n in the Temkin isotherm. d) Which of the isotherm fit the data best? Answer letter D only thank you!
Figure 7 of Conrad et al. (1999) shows the variation in C-isotopic composition of CO2 as a function of the concentration of methane measured in the soil and aquifers of a site contaminated in the residues of aviation fuels. Explain briefly the aim of these particular measurements made to the environmental study. Also explain briefly why there is a difference in isotopic composition of CO2 obtained via aerobic degradation and methanogenic degradation of AVGAS (fuel residues as contaminants) and the linear “mixing relationship” noted in Figure 7. How does the degradation process influence the CO2 isotopic signature ? I don't understand why the CO2 from aerobic degradation is lighter than the one from methnogenic degradation ?