Answered: It is an attachment that provides a…

It is an attachment that provides a quick means of chucking work-pieces with standard diameters or sizes (b)Combination chuck (c)Collet attachment (c)Steady rest (d)Taper attachment

Precision Machining Technology (MindTap Course List)

2nd Edition

ISBN:9781285444543

Author:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Publisher:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Chapter6: Milling

Section6.3: Vertical Milling Machine Operations

Problem 9RQ: When squaring a block on the vertical mill, what surface of the block should be machined first, and...

See similar textbooks

Related questions

Q: How is feed related to speed in machining operations such as Evaluate and Explain. turning ?

A: Feed rate is the speed at which the cutter is fed, that is, advanced against the piece of work. it's…

Q: The part furnished below is to be machined from a rectangular blank. Suggest the nachine tool(s)…

A: Operation Used?

Q: . What is the manufacturing process of lathe bed? Which material will be suitable for the product?

A: manufacturing process is pattern making and molding Lathe bed is made of high-grade cast iron…

Q: For a turning operation using a ceramic cutting tool, if the speed is increased by 25%, and constant…

A: given:Initial speed=Vdepth of cut=d=2.5 mmTool life=Tfeed=fn=0.5y=0.6

Q: In a slab milling operation , L_w = 200 mm table feed = 18 mm/min, diameter of cutter = 34 mm depth…

A: Given Data: The length of the slab is, Lw=200 mm. The feed rate of the table is, f=18 mm/min. The…

Q: The diameter of a mild steel rod is to be reduced from 70 mm to 65 mm by plain turning in a single…

Q: A 200 mm long magnesium alloy bar, 63 mm in diameter is turned on a lathe using a high speed steel…

A: Given data, Length of the magnesium alloy bar, L = 200 mm Diameter of the bar, D = 63 mm Velocity of…

Q: aking carbide as an example and using EQ.(8.30) determine how much the feed should be changed in…

A: Taking carbide as an example and using EQ.(8.30) determine how much the feed should be changed in…

Q: (4):- The surface of the product is smooth as the cutting speed is a---- a- High speed b- Low speed…

A: 4) Option A => High Speed ===>>> Which it gives the best surface finish. 5) Option A…

Q: With a neat sketch, explain the 4 types of Taper turning operations

A: In the taper turning operation the diameter of the cylindrical object is reducing gradually from one…

Q: An external turning operation is performed on a hollow workpiece of 200 mm external diameter and 100…

A: Hello. Since your question has multiple sub-parts, we will solve first three sub-parts for you. If…

Q: With a neat sketch, explain the 4 types of Taper turning operations?

A: Four different types of Taper turning operations are : Here a tool having broad nose angle and…

Q: Make a figure and explain how shear plane angle effect the power requirements in the machining. How…

A: Required :- Explanation of how the shear plane angle affects the power requirements in machining…

Q: Where are the areas on the shaper machine that should be given most caution? Why?

A: given; Where are the areas on the shaper machine that should be given most caution? Why?

Q: List the methods of taper turning and explain any one in detail?

A: Solution:

Q: to perform a rough cut single point facing operation in a lathe of 5 mm diameter cylinder workpiece…

A: Given Diameter = 5mm Feed rate = 0.5 mm/rev Depth of cut = 4.5mm Specific energy = 3Ws/mm3 To find…

Q: If expanded honeycomb panels were to be machined in a form-milling operation, what precautions would…

A: Honeycomb Structure In composite manufacturing, the honeycomb structure is formed by joining the…

Q: In orthogonal turning of low carbon steel pipe with principal cutting edge angle of 90°, the main…

A: Given:Feed force, FT=800 NRake angle, α=0o Shear angle, ϕ=25oCutting force, Fc=1000 N

Q: A cylindrical work bar with 4.5 in diameter and 52 in length is chucked in an engine lathe and…

A: (a) The depth of cut is, d = 0.125 in. (b) The required feed is, f = 0.010 in/rev. (c) The cutting…

Q: Discuss the Applications and Importance of knurling and Taper turning Operatio

A: Taper turning Operation - Taper turning is a procedure that involves combining the rotation of the…

Q: What variable factors to be consider before operating any lathe operations? How you can set these…

A: What Is Lathe ? A machine for shaping wood, metal, or other material by means of a rotating drive…

Q: dentify the lathe operations in the below mentioned diagram and name and explain them.?

A: Grooving, turning, cutting, sanding, and other processes are common on the lathe. If someone wishes…

Q: What is the manufacturing process of lathe bed? Which material will be suitable for the product?

A: lathe is a machine which can perform various machining process like turning, boring, threading etc.…

Q: In orthogonal turning of a cylindrical tube of wall thickness 5 mm, the axial and the tangential…

A: The assumptions of the Merchant's Circle diagram are: 1. The blade of the cutting instrument must be…

Q: Explain the differences between the up milling and down milling?

Q: 1- Define lath Process, why the tool should have Red Hardness Property? 2- What are the kinds of…

A: 1. The measurement of material hardness at a high temperature is referred to as "hot hardness…

Q: A 6.5 inch long, 0.5 inch diameter stainless steel rod is being reduced to 0.480 inches by turning…

Q: A job has to be machined in shaping and the process parameters are given below: Length of the…

A: Given that A job has to be machined in shaping and the process parameters are given below: Length…

Q: 1. In a production turning operation, the cylindrical workpiece is 425 mm long and 190 mm in…

Q: What is a tree lathe?

A: In this problem, it is asking about the tree lathe.

Q: In a turning operation on low carbon steel with hardness = 135 HB, the cutting speed = 180 m/min,…

Q: An orthogonal cutting operation is being carried out under the following conditions: t0=0.38 mm,…

A: Given, Uncut chip thickness = t0 = 0.38 mm Chip thickness = t = 0.65 mm Width of the cut = b = 2.5…

Q: What is the manufacturing process of lathe bed? Which material will be suitable for the product?…

A: manufacturing Process of lathe bed ? And it's material ? A lathe machine is used in manufacturing…

Q: f cut is 2 mm, what is the value of maximum uncut chip thickness when the table feed is 20 mm/min?

Q: In a straight turning operations the diameter of a workpiece is reduced from 50 mm 40 mm using a…

A: Given:- diameter D0 = 50 mmFinal diameter D1 = 40 mmfeed rate F= 0.1 mm/revrake angle…

Q: Example 4.2.2: In a production turning operation, the foreman has decreed that a single pass must be…

A: Given data:

Q: A 400 mm long, 19.5 mm diameter of 304 stainless steel rod (assume specific energy of steel is 4…

Q: Problem 10.21 Estimate the time required for one complete cut on a workpiece of length 350 mm and…

Concept explainers

Machining Processes and Machine Tools

Machining is represented as the process in which an excessive amount of substance is eliminated from the particular element in the form of pieces. In machining, cutting tools such as rotary tools, lathe, drill press, grinder, chop saw, welders, and many more are applied to get the desired shape. As compared to other manufacturing processes, machining is precise and versatile.

Question

100%

It is an attachment that provides a quick means of chucking work-pieces with standard diameters or sizes (b)Combination chuck (c)Collet attachment (c)Steady rest (d)Taper attachment

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

In face milling, assume that the Diameter of the cutter is 200 mm, the width of the block is 60 mm, and the length of the block is 344 mm, if the depth of cut is 3 mm, = 0.6 mm/min, and N = 100 rpm. The cutter has 12 inserts, and the workpiece material is bronze. Calculate the estimated power required, the cutting force, and the torque.
In a turning operation, the operator has established that a single pass on the cylindrical workpiece must be completed in 5.0 min. The piece is 400 mm long and 150 mm in diameter. Using a feed of 0.30 mm / rev and a depth of cut of 4.0 mm, what speed of cut should be used to meet this machining time?
Assuming that the coefficient of friction is 0.25, calculate the maximum depth of cut forturning a hard aluminium alloy on a 15-kW lathe (with a mechanical efficieny of 80%) at awidth of cut of 6 mm, rake angle of 0˚, and a cutting speed of 90 m/min, shear strength of 150 MPa.
Explain the differences between the up milling and down milling?
In orthogonal turning of low carbon steel pipe with principal cutting edge angle of 90°, the main cutting force is 1000 N and the feed force is 800 N. The shear angle is 25° and orthogonal rake angle is zero Employing Merchant's theory, what is the ratio of friction force to normal force acting on the cutting tool?
7. What is the manufacturing process of lathe bed? Which material will be suitable for the product? Justify your answer.
In orthogonal turning of a low carbon steel bar of diameter 150 mm with uncoated carbide tool. the cutting velocity is 90 m/min The feed is 0.24 mm/rev and the depth of cut is 2 mm. The chip thickness obtained is 0.48 mm If the orthogonal rake angle is zero and the principal cutting edge angle is 90° Calculate the shear angle in degree.
In orthogonal turning of a bar 100 mm diameter with a feed of 0.25 mm/rev., depth of cut = 4 mm, cutting velocity = 90 m/min. it is observed that the main cutting force is perpendicular to friction force acting at the chip tool interface and cutting force is 1500 N. find (i) rake angle (ii) normal force.
A flat milling operation will be carried out with a horizontal milling machine, in a piece of 250 mm in length and 50 mm in width, using a felicoidal bur with a diameter of 75 mm, with 10 teeth. If the feed per tooth is 0.2mm, and the cutting speed is 0.75 m / s, how would you determine the speed of metal removal to remove 6 mm from the surface of this piece?
How is twist drill manufactured? Explain with neat sketches wherever applicable.
Find the machining time required to turn a mild steel rod from 65mm to 58 mm over a length of 100 mm by using a carbide insert. If the approach length and over run length is taken as 5 mm, Cutting speed as 20 m/min and feed is =0.2 mm/rev, and the depth of cut is 0.5mm
When squaring a block on the vertical mill, what surface of the block should be machined first, and why?