It is desired to chrome a cubic metal piece with a 10 cm edge with a chromium layer (d = 7.2 g / ml) of 0.01 cm. A 10 Amp current source is applied to it. How long must this current be applied to achieve that chrome thickness?

It is desired to chrome a cubic metal piece with a 10 cm edge with a chromium layer (d = 7.2 g / ml) of 0.01 cm. A 10 Amp current source is applied to it. How long must this current be applied to achieve that chrome thickness?

Principles of Instrumental Analysis

7th Edition

ISBN:9781305577213

Author:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Publisher:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Chapter2: Electrical Components And Circuits

Section: Chapter Questions

Problem 2.5QAP

See similar textbooks

Related questions

Q: A cylindrical sample of solid germanium has length 55.0 mm and diameter 5.0 mm. In a test circuit,…

Q: Each surface is 6 dm3 in an electrolysis cell containing a copper sulphate solution. Current density…

A: Total Current strength = current density * surface area = (20 A / dm2 *…

Q: ELECTROCHEMISTRY: Copper was electroplated from a CuzsO4 solution onto an electrode with an active…

A: We will calculate charge supplied , then calculate volume of cu deposited to find thickness of cu.

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active…

A: Copper ions reducing to cu as Cu2++2e-= Cu . Here we can see that 2 moles of electrons are required…

Q: 2. Dip-coating process is one of the methods for electrode surface modification.

A: Yes it is true ... Dip coating process us one the process of electrode surface modification

Q: LECTROCHEMISTRY: Copper was electroplated from a CuzSo4 solution onto an electrode with an active…

Q: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active surface area of…

A: Given, Surface area = 7.63 cm2 Current = I = 3.98 A Time period = t = 0.6427 hours Density of Cu…

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cuzs04 solution onto an electrode with an active…

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active…

A: We will first find mass of cu deposited, then find volume of cu. Atlast we will find thickness of…

Q: w w dm' is coating by current flow in 75 minutes. The current is kept constant as 1.25 A (I), and…

A: Given: Area=2.5 dm2IT=1.25 ACurrent efficiency =95%

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu2so4 solution onto an electrode with an active…

Q: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active surface area of…

A: Given: Surface are of the plate = 3.34 cm2 Density of copper = 8.96 g/cm3 Current passed = 4.94 A…

Q: A steel sheet will have a thin layer of zinc put on one side to protect it from corrosion.…

A: The total charge passed through the solution was Q= It Q= It Q = 2 A ×30×60 Q =3600 C Zn+2 + 2e_ →…

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu,so4 solution onto an electrode with an active…

A: We will first find mass of cu deposited, then calculate volume of cu and then thickness .

Q: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active surface area of…

A: Given data: Area =3.72 cm2 , current= 3.5 A , time=0.7053 hr. , Density = 8.96 g/cm3 , Molar mass=…

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu2SO, solution onto an electrode with an active…

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu,so, solution onto an electrode with an active…

Q: An atomic beam is designed to function with (a) cadmium, (b) mercury. The source is an oven…

A: Given: Temperature, T=380 K Dimensions=1 cm×1 cm×10-3 cm Vapor pressure of Cadmium=0.13…

Q: escribe the difference between the Resistance and Resistivity. (2) Wh= iton and Dolaron2 Explain in…

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu2sO4 solution onto an electrode with an active…

Q: III. THREE RESISTORS ARE CONNECTED IN SERIES R1 = 5 OHM, R2 = 10 OHM. WHAT WILL BE THE VALUE OF THE…

A: Answer: Relation between current, voltage and resistance of the circuit is: R=VI

Q: ELECTROCHEMISTRY: Copper was electroplated from a CuzsO, solution onto an electrode with an active…

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu,sO, solution onto an electrode with an active…

A: Area = 4.94 cm2 Time = 0.9619 hours Current = 4.77 A

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active…

A: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active surface area of 6.8…

Q: We apply a voltage of 10 V to Fcc an aluminum wire 2 mm diameter and 20 m long , if 10 % of the…

A: Drift velocity of the electrons is the average velocity obtained by the electrons in the material in…

Q: Calculate the voltage necessary to supply a current of 6A through a 4ohms resistor.

A: Ohm’s law- It gives relation between voltage, current and resistance. Ohms law is-Current(I) is…

Q: When 5.1 V battery is connected to 101cm wire having cross sectional area (2.34 x 10 m?) current of…

A: Ratio of product of resistance and cross section area of wire to the length of the wire is known as…

Q: A conductance cell filled with 0.01 M solution of an electrolyte offered a resistance of 2300 ohms.…

A: Given: Resistance, R = 2300 Ω Length or distance between electrodes, l = 1.90 cm Area of cross…

Q: The time needed to plate out 2.00 g Ni(Ni2+) using a 15-amp current is about 3.7 minutes 7.3…

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active…

Q: A 2-meter copper conductor which has a cross-sectional area of 8 x 10 – 7 m2 has a potential energy…

A: Given data: *Cross-sectional area of copper is 8 x 10 – 7 m2. * Length of the copper is 2 meter.…

Q: The main losses of the energy conversion of solar cells are: 1. The reflection at the front surface…

A: Solar cell is an electrical device which converts the light energy into electrical energy. The…

Q: What is the purpose of waiting 1s after a voltage pulse before measuring current in sampled current…

A: Stationary current cyclic voltammetry is intended for electrochemical objects that (after some time)…

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active…

A: Given: Surface are of the plate = 6.8 cm2 Density of copper = 8.96 g/cm3 Current passed = 3.28 A…

Q: Silver is uniformly electro-deposited on a metallic vessel of surface area of 900 cm2 by passing a…

A: Oxidation is the process that involved the loss of electrons and oxidized to cation. Hence when a…

Q: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active surface area of…

A: Given: Surface are of the plate = 3.83 cm2 Density of copper = 8.96 g/cm3 Current passed = 3.94 A…

Q: (d) Calculate the electrical conductivity of a 6.0 mm diameter cylindrical silicon specimen of 60 mm…

Q: If you wish to decrease the amount of current in a resistor from 240mA to 180mA by changing the 24V…

A: We have R=VI=constant............1 Where, R=resistance I=current…

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu2SO, solution onto an electrode with an active…

A: Given: Cu2SO4 is being used for electroplating Area = 3.11cm2 Current = 4.45A Time = 1.2715h

Q: When 5.1 V battery is connected to 101cm wire having cross sectional area (2.34 x 10*m²) current of…

A: Voltage V=5.1 V Current I=0.48 A Length of wire L=101 cm L=1.01 m Unit of Resistivity (ρ) is Ω.m…

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu2sO4 solution onto an electrode with an active…

A: Given: Surface are of the plate = 6.28 cm2 Density of copper = 8.96 g/cm3 Current passed = 4.40 A…

Q: 2. DETAILS SERPSE10 26.2.OP.006. MY NOTES ASK YOUR TEACHER A silver wire has a length of 1.50 m and…

A: Ohm's Law states that amount of current passed through material between two points is directly…

Q: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active surface area of…

A: Given, Surface area = 5.97 cm2 Current = I = 3.41 A Time in hours = t = 0.7415 hours Density of…

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active…

A: Cu is deposited at electrode as Cu2++2e-= Cu . We can infer from here that 2 moles of electrons=2F=…

Q: A thin film of zinc is to be deposited on one side of a steel sheet. Determine the zinc film…

A: The total charge passed through the solution was Q= ItQ = ItQ = 2 A ×30×60Q =3600 CZn+2 + 2e- → Zn…

Q: ELECTROCHEMISTRY: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active…

A: Given: Area: 7.3 cm2 I = 4.54 A t = 0.6978 h = 2512.08 s d = 8.96 g/cm3 MW…

Question

100%

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Given

VIEW

Solution

VIEW

Answer

VIEW

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, chemistry and related others by exploring similar questions and additional content below.

Similar questions

Compute the resistivity of aluminum wire 5mm in diameter and 5 m long
Knowing that an electroplating industry wants to coat a steel sheet with a layer of metallic Cu by an electrodeposition process, what is the time to deposit a 50 μm layer on a 10 cm2 plate applying a current density of 30 mA /cm2 if process efficiency is 75%.
A 2-meter copper conductor which has a cross-sectional area of 8 x 10 – 7 m2 has a potential energy difference of 6 volts between its ends. The resistivity of copper is 1.7 x 10 – 8 Ω-m. Find: a. The resistance of the conductor, and b. The current passing through it
A thin film of zinc is to be deposited on one side of a steel sheet. Determine the zinc film thickness per 1cm2 of steel sheet if 2 A current was used and the electrolytic deposition process was done for exactly 30 minutes at 25oC. The zinc solution has a concentration of 1 M and can be assumed to be constant throughout the process.
A thin film of zinc is to be deposited on one side of a steel sheet. Determine the zinc film thickness per 1cm2 of steel sheet if 2 A current was used and the electrolytic deposition process was done for exactly 30 minutes at 25oC. The zinc solution has a concentration of 1 M and can be assumed to be constant throughout the process. pls explain the solution shown in the figure thoroughly or you can come up with your own thank you
An atomic beam is designed to function with (a) cadmium, (b) mercury. The source is an oven maintained at 380K with a small slit of dimensions 1.0cm x 1.0 x 10-3cm. The vapor pressure of cadmium is 0.13 Pa nd that of mercury is 12 Pa at this temperature. What is the atomic current (the number of atoms per second) in the beams?
Copper was electroplated from a Cu2SO4 solution onto an electrode with an active surface area of 3.72 cm2. Determine the thickness (mm) of the deposit if the current is kept constant at 3.5 A for 0.7053 hours. (density of Cu = 8.96 g/cm3, MW of Cu = 63.55 g/mol). Input values only with 2 decimal places only.
What is the difference between faradaic and charging current?
We apply a voltage of 10 V to Fcc an aluminum wire 2 mm diameter and 20 m long , if 10 % of the valence electrons carry the electrical charge , the parameter of cell α = 0. 4049 nm , electrical conductivity σ = 3.77 ×105 cm-1. Ω-1. , calculate the average drift velocity of the electrons in m/sec
ELECTROCHEMISTRY: Copper was electroplated from a Cu2SO4 solution onto an electrode with an active surface area of 7.17 cm2. Determine the thickness (mm) of the deposit if the current is kept constant at 3.42 A for 1.4748 hours. (density of Cu = 8.96 g/cm3, MW of Cu = 63.55 g/mol). (Input values only with 2 decimal places. Do not include the unit.) show sol'n please
What is the purpose of waiting 1s after a voltage pulse before measuring current in sampled current voltammetry?
Please assist with the following sub questions of question 1. a) The conductivity of a 0.05M solution of acetic acid at 18⁰C is 4.4×10-4 (ohms)-1cm-1. Limiting molar conductivity of acetic acid at the same temperature is 387 (Ohms)-1cm². Calculate the dissociation constant (Ka) of acetic acid? b) The resistivity of aluminum is 2.824×10-8 ohms.m. Calculate the potential drop across a piece of aluminum wire that is 2.0 mm in diameter and 1.00 m long. Assume current is 1.25 A. C) Calculate the conductance and conductivity of a metal if the resistivity of the metal is 2.824×10-8 ohms.m, with resistance of 9.0×10-3 ohms when current is 1.25 A.