-It is preferable to activate the cofactors before using them and this is done through Wash them frequently with a dilute acid solution Or burn it at moderate temperatures Or by using different activators depending on the type of cofactor to be reactivated Fixed bed reactors are less efficient than fluid bed reactors due to O Material incompatibility with each other The fact that the solid package in fixed bed O reactors is not exposed to a high concentration of reaction gas The reactants being in the fluid layer state are more mobile and homogeneous due to the reaction mechanism

-It is preferable to activate the cofactors before using them and this is done through Wash them frequently with a dilute acid solution Or burn it at moderate temperatures Or by using different activators depending on the type of cofactor to be reactivated Fixed bed reactors are less efficient than fluid bed reactors due to O Material incompatibility with each other The fact that the solid package in fixed bed O reactors is not exposed to a high concentration of reaction gas The reactants being in the fluid layer state are more mobile and homogeneous due to the reaction mechanism

Appl Of Ms Excel In Analytical Chemistry

2nd Edition

ISBN:9781285686691

Author:Crouch

Publisher:Crouch

Chapter9: Complexometric And Precipitation Titrations

Section: Chapter Questions

Problem 18P

See similar textbooks

Similar questions

Depletion of nitrate in the reactor is called (BLANK). The process for the accumulation of ammonia is called (BLANK).
Q/ ture or false 1- The difference between wet and dry corrosion, in the first case it occurs in the presence of moisture and the second in its absence * 2- It is necessary to fix the names of the equipment on the illustrative curve of the industrial process * 3- The flow curves are classified according to the number of reactors and the mechanism of separation or non-separation of the products * 4- In the processes that involve the purification of raw materials and products, it is preferable to purify the raw materials by adsorption, while the products are purified by washing, stripping and absorption. 5- The amount of dissolved substances in well water differs greatly from surface water due to the difference in temperature. * 6- The biological waste has no significant effect on the efficiency of the flow, but rather its effect on the toxicity of the water used for industrial purposes. 7- Several methods are used to remove unacceptable odors from water, including chemical…
- The major objective of a roasting process is to eliminate the Sulphur contained in the concentrate andto provide a calcine. In a roasting plant, 1000 kg per hour of molybdenum(IV) sulphide (MoS2) is roastedwith 25 % excess air to obtain MoO3 calcine in a chamber-type roasting furnace. Preheated air entersthe reactor at 400 K while MoS2 enters at room temperature. After the process, the waste gases leavethe reactor at 1000 K, and the calcine leaves at 850 K.a) Draw process flowsheet and heat balance diagram (ref. temp is 298 K) b) Calculate the amount of off-gas per hour in moles. c) Calculate the amount of calcined MoO3 per hour in kg.
Angeline performed an experiment on vitamin C content. She purchased bell peppers of different colours from local wet market. Bell pepper samples were cut, blended and homogenized with a fixed portion of water. Subsequently, coulometric titration was performed using iodine under constant current of 60 mA. In one of the experiment replicate,starch end point was achieved after 18 minutes. Suppose that bell pepper sample recorded initial mass of 115 g, deduce it’s vitamin C (176 g/mol) content in percentage. (F = 96500C)
A liquid hydrogen (LH2) tank is a double-hulled tank composed of cold drawn and annealed 316 stainless steel, with the cryogenic liquid on the inside and vacuum in the annular space (the outer tank). A) What factors might lead to the failure of the LH2 tank? B) Associate each factor from part A with a failure mechanism. C) What can you do to prevent the LH2 tank from failing? What can you also do to prevent the release of flammable and explosive gas?
How average MW is related with initiator and monomer concentration? Explainwith equations.
Q10. For Sony’s first generation LIBs, graphite C and LiCoO2 are used. The cathode LiCoO2only practically allows 0.5Li reversibly de/intercalated in LiCoO2 during charge-discharge cycles.You can calculate the practical capacity of LiCoO2 asA. 186 mAhB. 137 mAhC. 274 mAhD. 372 mAh
Consider the following simultaneous reactions: N2 + 3H2 → 2NH3(a) H2 + CO2 → CO + H2O (b) 550 mols are fed into the reactor, initially containing 67.4% H2, 21.3% N2 and the remainder CO2. The mixture at the outlet has 16% NH3 and 5% H2O (molar percentages). a- Calculate the degrees of advancement of reactions (a) and (b).
A bone fracture demands the use a bio-degradable implantplate with a lengthof 50mm and a width of 10mm.The healing timecorresponding to full bone reconstruction along with complete implant degradation (100% corrosion) is expected to be 1 year. The materialof choice for the implant is a magnesium alloy having a density of 1.8g/cm3and a corrosion penetration rate of CPR=1mm/year.Note the corrosion constant K=87.6. (a)What should be the implant plate thickness to meetthese requirements?(a)What can be done if the healing time will have to be increased for another 6months?Suggest and justify at least two opportunities.
A unique plant was discovered from the hot springs of Maquinit, Coron, Palawan. To study the activity of the plant, approximately 5.00 g of the fresh plant was finely cut and ground and then mixed with an extraction buffer to make up a total of 1.00 mL crude plant extract. Approximately 19.00 mL of water was added to the plant extract. To determine the protein concentration of the extract, a bovine serum albumin (BSA) stock solution with a concentration of 300 μg mL-1 was used and mixtures with the following compositions and absorbance readings were prepared: A 100 μL aliquot of the diluted plant extract was added with 400 μL of water and was subjected to Bradford assay. Determine the protein concentration, in mg mL-1, of the original 1.00 mL crude extract if the absorbance of the diluted aliquot extract acquired from the analysis is 0.234.
Ethanol reacts with chlorine in a continuous reactor according to the equationC2H6 + Cl2 → C2H5Cl + HClA portion of the monochloroethane reacts with chlorine in an undesired side reaction according to the equationC2H5Cl + Cl2 → C2H4Cl2 + HClThe conversion of ethane is 13%, the selectivity of monochloroethane relative to dichloroethane is 13.3 and all the chlorine is consumed. Calculate the moles of each species in the outflow per 100 moles of monochloroethane produced.
Figure below shows three reactors linked by pipes. As indicated, the rate of transfer of chemicals through each pipe is equal to a flow rate (Q, with units of cubic meters per second) multiplied by the concentration of the reactor from which the flow originates (c, with units of milligrams per cubic meter). If the system is at a steady-state, the transfer into each reactor will balance the transfer out. Develop mass-balance equations for the reactors and solve the three simultaneous linear algebraic equations for their concentrations