Magnolia Dairy product must cool 4000 gallons of fresh milk from the farm from an initial temperature of 80°F to a temperature of 38°F in 5 hours. If the density of the milk is 8.6 lb/gal, sg = 1.03 and Cp 0.935 BTU/lb-R, how much brine must be circulated in gpm, if the change in temperature of brine is 15F°, sg = 1.182 and Cp = 0.729 BTU/lb-R?

Magnolia Dairy product must cool 4000 gallons of fresh milk from the farm from an initial temperature of 80°F to a temperature of 38°F in 5 hours. If the density of the milk is 8.6 lb/gal, sg = 1.03 and Cp 0.935 BTU/lb-R, how much brine must be circulated in gpm, if the change in temperature of brine is 15F°, sg = 1.182 and Cp = 0.729 BTU/lb-R?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Air is compressed into a 90 ft3 rigid tank until the pressure is 30.5 psia and the temperature becomes 580 0R. What is the mass of the air in lbm and the change in pressure when the temperature decreases to 300 0R Rair = 53.342 ft-lbf/ lbm-0R (c) What is the final pressure of the gas? (The value of gas constant, R = 0.4615 kJ/kg-K, Cp = 1.8723 kJ/kg-K, Cv = 1.4108 kJ/kg-K)
An ideal gas passes a diffuser. At the diffuser inlet, the temperature is T1 = 350.00 K, the pressure P1 = 100.00 kPa, the velocity V1 = 200.00 m/s, and the inlet area A1 = 0.30 m2. At the exit, the velocity is very small. The specific heat of the ideal gas at the constant pressure is cp = 1.0050 kJ/(kg·K). The gas constant is R = 0.2870 kPa·m3/(kg·K). Determine the density at the inlet, ρ1 __________(kg/m3)
A pressure cooker operates by cooking food at a higher pressure and temperature than is possible at atmospheric conditions. Steam is contained in the sealed pot, with a small vent hole in the middle of the cover, allowing steam to escape. The pressure is regulated by covering the vent hole with a small weight, which is displaced slightly by the escaping steam. Atmospheric pressure is 1 bar, the vent hole area is 7mm2, and the pressure inside should be 2.75 bar. What is the mass in kg of the small weight?
Question #1 a) The absolute pressure inside a tank is 0.13bar, and the surrounding atmospheric pressure is 98 kPa. A Bourdon gage is mounted in the tank wall to measure the pressure, in kPa? Is this a vacuum or gage reading? b) (967)kJ of heat is transferred from the system to the surroundings when a closed system of mass (28)kg undergoes a process. During the process, 200kJ work is done on the system. If the initial specific internal energy of the system is 300 kJ/kg, Describe the process and determine the final specific internal energy, in kJ/kg? Neglect changes in kinetic and potential energy.
The fluid is heated from 125 degrees Fahrenheit to 225 degrees Fahrenheit. Consider an ideal gas with the following characteristics: R = 85 ft-lbf/lbm-R Cp = 0.35 + 0.000325T BTU/lbm-R If the heating is at constant pressure, (e) the value of k at 160 degrees Celsius. If the fluid undergoes an isentropic process, determine (f) non-flow work and (g) steady-flow work. (For item f and g, use the value of k at 160 degrees Celsius).
Unreasonable Results - A slightly deranged Arctic inventor surrounded by ice thinks it would be much less mechanically complex to cool a car engine by melting ice on it than by having a water-cooled system with a radiator, water pump, antifreeze, and so on. (a) If 80% of the energy in 1.00 gal of gasoline is converted into “waste heat” in a car engine, how many kilograms of 0C ice could it melt? (b) Is this a reasonable amount of ice to carry around to cool the engine for 1.00 gal of gasoline consumption? (c) What premises or assumptions are unreasonable?
After a lengthy period of driving, you can feel how warm the engine is by placing your palm on the hood or even near to it. What kind (or types) of heat transfer are occurring?
A fluid flowing in a pipe 1000 ft above the reference line at a pressure of 200 psia, specific volume of 2 ft3 /lb, velocity of 200 ft/sec and internal energy of 100 Btu/lbm. Determine (a) the total energy of the flowing fluid with respect to the reference line and (b) the specific enthalpy in Btu/lbm . Local gravity is 32 ft/sec2 .
A 5-feet diameter Chimney is designed to handle a flue gas produced in a steam power plant at a rate of 17 lb/s. The barometric pressure is 29.92-inch Hg. Outside air enters the combustion chamber at 90 F. The average temperature of the flue gas inside the Chimney is 572 F and its molecular weight is 30. Cv = 0.35, Rair = 53.342 ft-lb/lb-R. Calculate: 5. The total draft, feet of air. 6. The height of the Chimney, feet
Consider an air conditioning system which requires periodic air renewal. Therefore, fresh air must be introduced by mixing outside air (state 1) and return air from the conditioned room (state 2). The figure shows the principle of operation and data on the air quantities and the evaporator outlet (state 4). Determine the capacity (Q) of the evaporator coil in kJ/kg of dry air.
This example focuses on thermodynamics
One pound of air with an initial temperature of 200F is allowed to expand without flow between pressure of 90 and 15 psia. if the air is undergoing a process that follows pVn=C, where n=1.5, what is the non-flow work?