Martinez Products manufactures a line of desk chairs. Martinez's production operations are divided into two departments — Department 1 and Department 2. The company uses a process costing system. Martinez incurred the following costs during the year to produce 25,700 chairs: Department 1 $863,500 Department 2 $287,000 If Martinez sells 22,600 chairs during the year, what will be the cost per chair produced? (Round your answer to two decimal places.) A. $38.21 B. $44.77 C. $33.60 D. $50.91
Q: Colonels uses a traditional cost system and estimates next year's overhead will be $882,000, with…
A: Predetermined overhead rate = Total Overhead costs / Direct labor hours Predetermined overhead rate…
Q: Rosco Corporation's relevant range of activity is 3,000 units to 7,000 units. When it produces and…
A: Total direct manufacturing overhead includes all the direct expenses such as direct material, direct…
Q: Each year, Basu Company produces 21,000 units of a component used in microwave ovens. An outside…
A: Formula: Differential cost = Making - Buying
Q: Box Springs, Inc., makes two sizes of box springs: twin and double. The direct material for the twin…
A: Workings:
Q: Aztec Industries produces bread which goes through two operations, mixing and baking, before it is…
A: Overhead rate is used to apply the overhead incurred to the production. It is calculated by dividing…
Q: Dine City, manufactures pressure Cookers. Based on past experience, Dine City has found that its…
A: Total overhead cost incurred = Fixed Cost + Variable Overhead Cost Variable Overhead Cost =…
Q: Marvel Parts, Inc., manufactures auto accessories. One of the company's products is a set of seat…
A:
Q: Andretti Company has a single product called a Dak. The company normally produces and sells 82,000…
A: Break-even point: A breakeven analysis is a calculation of the point at which revenue equals…
Q: Dake Corporation's relevant range of activity is 3,500 units to 8,500 units. When it produces and…
A: Formula: Total manufacturing overhead = Variable manufacturing overhead + Fixed manufacturing…
Q: Hartley Company produces two products, Flower and Planter. Flower is a high-volume item totaling…
A: Traditional cost method: Under this method, indirect costs are distributed on the basis of the end…
Q: Younes Inc. manufactures industrial components. One of its products, which is used in the…
A: Variable cost means the cost which vary with the level of output where as fixed cost remain fixed…
Q: Blue Devil Corporation produces a single product and has the following cost structure: Number of…
A: Costing: An estimation of the cost of products and services is called costing. It helps to determine…
Q: Yang Manufacturing, which uses the high-low method, makes a product called Yin. The company incurs…
A: The High-low method is a method to determine the variable and fixed costs components in total costs…
Q: Smoky Mountain Corporation makes two types of hiking boots—the Xtreme and the Pathfinder. Data…
A: 1.
Q: Shun Corporation manufactures and sells a hand held calculator. The following information relates to…
A: Please find the answer to the above questions below:
Q: Mullennex Corporation's relevant range of activity is 2,000 units to 6,000 units. When it produces…
A: Fixed costs: Fixed costs are the costs incurred by a company irrespective of its level of…
Q: Fogerty Company makes two products-titanlum Hubs and Sprockets. Data regarding the two products…
A:
Q: Puget World, Incorporated, manufactures two models of television sets, the N 800 XL model and the N…
A: Direct material cost for Model N 800 XL = 3,000 units x $90 per unit = $270,000 Direct material cost…
Q: How many calendars must Paney sell next year to earn an operating income of $24,600?
A:
Q: In its first year of operations, a company produced 10,000 units and sold 8,000 units of its…
A: Solution: Under absorption costing, product cost include all manufacturing costs including fixed…
Q: in one of fts products. A total of 5,000 units of this part are produced and used every year. The…
A: Make or buy is the decision to be made by the entities to decide that the products if made will be…
Q: The Machining Department of Hock Company has a total capacity of 2,400 machine hours per month. The…
A: Total machine hours available = 2400 machine hours Contribution per machine hour = Contribution per…
Q: lartinez Products manufactures a line of desk chairs. Martinez's production operations are divided…
A: Process costing is the one widely used by the companies who are involved in the manufacturing of…
Q: The Park Avenue Corporation currently makes a part required in its finished product. The company…
A: Total savings = Total cost of manufacture - Total cost of purchase
Q: Walsh Automobile Company fabricates automobiles. Each vehicle includes one airflow sensor, which is…
A: Introduction: Operating income is an institution's net income before any financial activity or taxes…
Q: Lynch Company manufactures and sells a single product. The following costs were incurred during the…
A: Fixed manufacturing overhead per unit = Total Fixed manufacturing overhead / Units produced =…
Q: Half Moon, Inc. is a yoga mat manufacturer located in Portland, Oregon. The company has two product…
A: profit volume analysis table is prepared in order to find the profit of the company when ever…
Q: MTI makes three types of lawn tractors: M3100, M4100, and M6100. In the past, it allocated overhead…
A: POHR in case overhead are allocated basis the machine hours: = Total overhead / Total machine hours
Q: Underwood, Inc. manufactures two products. It currently has 2,000 hours of direct labor and 1,000…
A: Contribution margin refers to the selling price per unit after subtracting variable cost per unit.…
Q: Martinez Products manufactures a line of desk chairs. Martinez's production operations are divided…
A: Given, Units produced = 26,300 units Department 1 cost = $860,500 Department 2 cost = $295,000
Q: Andretti Company has a single product called a Dak. The company normally produces and sells 85,000…
A: Incremental cost: Incremental cost refers to the cost incurred in producing an additional unit, in…
Q: Acme Corporation produces two basic products: widgets and wadgets. Below is a table of outputs and…
A: Partial factor of productivity= Total Output/Total Energy Input Under Multi factor and Total factor,…
Q: Windsor Co.incurs $987000 of overhead costs each year in its three main departments, machining…
A: Calculate overhead allocation rate:Overhead allocation rate = Estimated overhead cost / Direct labor…
Q: Roper Furniture manufactures office furniture and tracks cost data across their process. The…
A: Cost Classification: This includes the separation of expenses in the categories it belongs to. The…
Q: pany makes 420 units of product YBY a year, requiring a total of 460 machine-hours, 80 orders, and…
A: Activity-based costing is one of the costing methods that allocates overhead and indirect costs that…
Q: Cane Company manufactures two products called Alpha and Beta that sell for $140 and $100,…
A: Financial Advantage (Disadvantage) :— It is the increase or decrease in profit due to the additional…
Q: A business produces one product which requires the following inputs: Direct Materials 6 kg at S 4.80…
A:
Q: Davis Kitchen Supply produces stoves for commercial kitchens. The costs to manufacture and market…
A: Note: As per the requirement, we will answer only F-1 and F-2 sub-part.
Q: Pasternik Company produces and sells two products, Alpha and Zeta. The following information is…
A: Activity based costing (ABC): It is a costing method in which overhead and indirect costs are…
Q: Productions Costs: Direct material $ 0.60 Direct labor $ 1.00 Variable…
A: Using variable costing method, only variable manufacturing costs are included in the product cost.…
Q: Freshmart, Inc., began operations this year. The company produced 1,000 units and sold 1,000 units…
A: Budgets are helpful for huge companies with several complex activities as well as small companies.…
Q: Zeta Corporation has two products. They have the following annual production details: Total Costs…
A: Total machine hours Product Units produced Machine hrs per unit Machine hours used (P)…
Q: e Gadget Co produces three products, A, B and C, all made from the same material. Until now, it has…
A: Absorption costing refers to the concept of evaluating the expenses involved with producing a…
Q: 4. Gigabyte’s controller, Nan O’Second, recently attended a conference at which activity-based…
A: "Since you have asked for requirement 4, 5, and 6, only those requirements are answered."
Q: Cordova manufactures three types of stained glass window, cleverly named Products A, B, and C.…
A: The contribution of a product is calculated by deducting the variable cost from the sales price of…
Q: Hutchison Inc. makes three products. Information related to these products are as follows:…
A: Particulars Product X Product Y Product Z Monthly Demand in Units 1000 3000 3000 Mixing Minutes…
Q: Marvel Parts, Inc., manufactures auto accessories. One of the company's products is a set of seat…
A: Standard costing: Under this costing method, the expected costs are used in the accounting records…
Q: Marple Associates is a consulting firm that specializes in information systems for construction and…
A: Marginal costing is the accounting system wherein variable costs are charged to cost units and fixed…
Q: Smoky Mountain Corporation makes two types of hiking boots—the Xtreme and the Pathfinder. Data…
A: Traditional costing system: It is a method of allocation of overhead to the products. Under this…
Department 1
|
$863,500
|
Department 2
|
$287,000
|
Trending now
This is a popular solution!
Step by step
Solved in 2 steps
- The following product costs are available for Stellis Company on the production of erasers: direct materials, $22,000; direct labor, $35,000; manufacturing overhead, $17,500; selling expenses, $17,600; and administrative expenses; $13,400. What are the prime costs? What are the conversion costs? What is the total product cost? What is the total period cost? If 13,750 equivalent units are produced, what is the equivalent material cost per unit? If 17,500 equivalent units are produced, what is the equivalent conversion cost per unit?The following product Costs are available for Haworth Company on the production of chairs: direct materials, $15,500; direct labor, $22.000; manufacturing overhead, $16.500; selling expenses, $6,900; and administrative expenses, $15,200. What are the prime costs? What are the conversion costs? What is the total product cost? What is the total period cost? If 7,750 equivalent units are produced, what is the equivalent material cost per unit? If 22,000 equivalent units are produced, what is the equivalent conversion cost per unit?Mott Company recently implemented a JIT manufacturing system. After one year of operation, Heidi Burrows, president of the company, wanted to compare product cost under the JIT system with product cost under the old system. Motts two products are weed eaters and lawn edgers. The unit prime costs under the old system are as follows: Under the old manufacturing system, the company operated three service centers and two production departments. Overhead was applied using departmental overhead rates. The direct overhead costs associated with each department for the year preceding the installation of JIT are as follows: Under the old system, the overhead costs of the service departments were allocated directly to the producing departments and then to the products passing through them. (Both products passed through each producing department.) The overhead rate for the Machining Department was based on machine hours, and the overhead rate for assembly was based on direct labor hours. During the last year of operations for the old system, the Machining Department used 80,000 machine hours, and the Assembly Department used 20,000 direct labor hours. Each weed eater required 1.0 machine hour in Machining and 0.25 direct labor hour in Assembly. Each lawn edger required 2.0 machine hours in Machining and 0.5 hour in Assembly. Bases for allocation of the service costs are as follows: Upon implementing JIT, a manufacturing cell for each product was created to replace the departmental structure. Each cell occupied 40,000 square feet. Maintenance and materials handling were both decentralized to the cell level. Essentially, cell workers were trained to operate the machines in each cell, assemble the components, maintain the machines, and move the partially completed units from one point to the next within the cell. During the first year of the JIT system, the company produced and sold 20,000 weed eaters and 30,000 lawn edgers. This output was identical to that for the last year of operations under the old system. The following costs have been assigned to the manufacturing cells: Required: 1. Compute the unit cost for each product under the old manufacturing system. 2. Compute the unit cost for each product under the JIT system. 3. Which of the unit costs is more accurate? Explain. Include in your explanation a discussion of how the computational approaches differ. 4. Calculate the decrease in overhead costs under JIT, and provide some possible reasons that explain the decrease.
- SmokeCity, Inc., manufactures barbeque smokers. Based on past experience, SmokeCity has found that its total annual overhead costs can be represented by the following formula: Overhead cost = 543,000 + 1.34X, where X equals number of smokers. Last year, SmokeCity produced 20,000 smokers. Actual overhead costs for the year were as expected. Required: 1. What is the driver for the overhead activity? 2. What is the total overhead cost incurred by SmokeCity last year? 3. What is the total fixed overhead cost incurred by SmokeCity last year? 4. What is the total variable overhead cost incurred by SmokeCity last year? 5. What is the overhead cost per unit produced? 6. What is the fixed overhead cost per unit? 7. What is the variable overhead cost per unit? 8. Recalculate Requirements 5, 6, and 7 for the following levels of production: (a) 19,500 units and (b) 21,600 units. (Round your answers to the nearest cent.) Explain this outcome.Box Springs. Inc., makes two sizes of box springs: queen and king. The direct material for the queen is $35 per unit and $55 is used in direct labor, while the direct material for the king is $55 per unit, and the labor cost is $70 per unit. Box Springs estimates it will make 4,300 queens and 3,000 kings in the next year. It estimates the overhead for each cost pool and cost driver activities as follows: How much does each unit cost to manufacture?Box Springs, Inc., makes two sizes of box springs: twin and double. The direct material for the twin is $25 per unit and $40 s used in direct labor, while the direct material for the double is $40 per unit, and the labor cost is $50 per unit. Box Springs estimates it will make 5,000 twins and 9,000 doubles in the next year. It estimates the overhead for each cost pool and cost driver activities as follows: How much does each unit cost to manufacture?
- The following product costs are available for Kellee Company on the production of eyeglass frames: direct materials, $32,125; direct labor, $23.50; manufacturing overhead, applied at 225% of direct labor cost; selling expenses, $22,225; and administrative expenses, $31,125. The direct labor hours worked for the month are 3,200 hours. A. What are the prime costs? B. What are the conversion costs? C. What is the total product cost? D. What is the total period cost? E. If 6.425 equivalent units are produced, what is the equivalent material cost per unit? F. What is the equivalent conversion cost per unit?Evans, Inc., has a unit-based costing system. Evanss Miami plant produces 10 different electronic products. The demand for each product is about the same. Although they differ in complexity, each product uses about the same labor time and materials. The plant has used direct labor hours for years to assign overhead to products. To help design engineers understand the assumed cost relationships, the Cost Accounting Department developed the following cost equation. (The equation describes the relationship between total manufacturing costs and direct labor hours; the equation is supported by a coefficient of determination of 60 percent.) Y=5,000,000+30X,whereX=directlaborhours The variable rate of 30 is broken down as follows: Because of competitive pressures, product engineering was given the charge to redesign products to reduce the total cost of manufacturing. Using the above cost relationships, product engineering adopted the strategy of redesigning to reduce direct labor content. As each design was completed, an engineering change order was cut, triggering a series of events such as design approval, vendor selection, bill of materials update, redrawing of schematic, test runs, changes in setup procedures, development of new inspection procedures, and so on. After one year of design changes, the normal volume of direct labor was reduced from 250,000 hours to 200,000 hours, with the same number of products being produced. Although each product differs in its labor content, the redesign efforts reduced the labor content for all products. On average, the labor content per unit of product dropped from 1.25 hours per unit to one hour per unit. Fixed overhead, however, increased from 5,000,000 to 6,600,000 per year. Suppose that a consultant was hired to explain the increase in fixed overhead costs. The consultants study revealed that the 30 per hour rate captured the unit-level variable costs; however, the cost behavior of other activities was quite different. For example, setting up equipment is a step-fixed cost, where each step is 2,000 setup hours, costing 90,000. The study also revealed that the cost of receiving goods is a function of the number of different components. This activity has a variable cost of 2,000 per component type and a fixed cost that follows a step-cost pattern. The step is defined by 20 components with a cost of 50,000 per step. Assume also that the consultant indicated that the design adopted by the engineers increased the demand for setups from 20,000 setup hours to 40,000 setup hours and the number of different components from 100 to 250. The demand for other non-unit-level activities remained unchanged. The consultant also recommended that management take a look at a rejected design for its products. This rejected design increased direct labor content from 250,000 hours to 260,000 hours, decreased the demand for setups from 20,000 hours to 10,000 hours, and decreased the demand for purchasing from 100 component types to 75 component types, while the demand for all other activities remained unchanged. Required: 1. Using normal volume, compute the manufacturing cost per labor hour before the year of design changes. What is the cost per unit of an average product? 2. Using normal volume after the one year of design changes, compute the manufacturing cost per hour. What is the cost per unit of an average product? 3. Before considering the consultants study, what do you think is the most likely explanation for the failure of the design changes to reduce manufacturing costs? Now use the information from the consultants study to explain the increase in the average cost per unit of product. What changes would you suggest to improve Evanss efforts to reduce costs? 4. Explain why the consultant recommended a second look at a rejected design. Provide computational support. What does this tell you about the strategic importance of cost management?Petrillo Company produces engine parts for large motors. The company uses a standard cost system for production costing and control. The standard cost sheet for one of its higher volume products (a valve) is as follows: During the year, Petrillo had the following activity related to valve production: a. Production of valves totaled 20,600 units. b. A total of 135,400 pounds of direct materials was purchased at 5.36 per pound. c. There were 10,000 pounds of direct materials in beginning inventory (carried at 5.40 per pound). There was no ending inventory. d. The company used 36,500 direct labor hours at a total cost of 656,270. e. Actual fixed overhead totaled 110,000. f. Actual variable overhead totaled 168,000. Petrillo produces all of its valves in a single plant. Normal activity is 20,000 units per year. Standard overhead rates are computed based on normal activity measured in standard direct labor hours. Required: 1. Compute the direct materials price and usage variances. 2. Compute the direct labor rate and efficiency variances. 3. Compute overhead variances using a two-variance analysis. 4. Compute overhead variances using a four-variance analysis. 5. Assume that the purchasing agent for the valve plant purchased a lower-quality direct material from a new supplier. Would you recommend that the company continue to use this cheaper direct material? If so, what standards would likely need revision to reflect this decision? Assume that the end products quality is not significantly affected. 6. Prepare all possible journal entries (assuming a four-variance analysis of overhead variances).
- Natur-Gro, Inc., manufactures composters. Based on past experience, Natur-Gro has found that its total annual overhead costs can be represented by the following formula: Overhead cost = 264,000 + 1.42X, where X equals number of composters. Last year, Natur-Gro produced 30,000 composters. Actual overhead costs for the year were as expected. Total overhead for per unit was a. 1.42 b. 8.80 c. 11.63 d. 10.22Handbrain Inc. is considering a change to activity-based product costing. The company produces two products, cell phones and tablet PCs, in a single production department. The production department is estimated to require 2,000 direct labor hours. The total indirect labor is budgeted to be 200,000. Time records from indirect labor employees revealed that they spent 30% of their time setting up production runs and 70% of their time supporting actual production. The following information about cell phones and tablet PCs was determined from the corporate records: a. Determine the indirect labor cost per unit allocated to cell phones and tablet PCs under a single plantwide factory overhead rate system using the direct labor hours as the allocation base. b. Determine the budgeted activity costs and activity rates for the indirect labor under activity-based costing. Assume two activitiesone for setup and the other for production support. c. Determine the activity cost per unit for indirect labor allocated to each product under activity-based costing. d. Why are the per-unit allocated costs in (a) different from the per-unit activity cost assigned to the products in (c)?Cool Pool has these costs associated with production of 20,000 units of accessory products: direct materials, $70; direct labor, $110; variable manufacturing overhead, $45; total fixed manufacturing overhead, $800,000. What is the cost per unit under both the variable and absorption methods?