NUBD Co. has 24,000 defective units of a product that cost P8 per unit to manufacture, and can be sold for P4 per unit. These units can be reworked for P2 per unit and sold at their full price of P12 each. If NUBD reworks the defective units, how much incremental net income will result?
Q: Kim Yin Company has 15,000 units in inventory that had a production cost of $3 per unit. These units…
A: we have to calculate which option is benefit to company.
Q: NUBD Co. has 24,000 defective units of a product that cost P8 per unit to manufacture, and can be…
A: Given Defective Units = 24,000 Manufacturing Cost = P8 Sale price of defective units = P4 Rework…
Q: Chang Industries has 1,500 defective units of product that already cost $44 each to produce. A…
A: Period cost means which are not directly included in the process of production. General and…
Q: A company with excess capacity must decide between scrapping or reworking units that do not pass…
A: Lets understand the basics. When management have more than one alternative then management try to…
Q: A company with excess capacity must decide between scrapping or reworking units that do not pass…
A: Incremental income is the amount of extra money earned by putting an extra effort on products or…
Q: the lily corporation has 8,000 obsolate units of a product that are carried in inventory at a…
A: Additional revenue = Sale after remachined - sale value from scrap = $72000 - 28000 = $44,000
Q: A company with excess capacity must decide between scrapping or reworking units that do not pass…
A: Incremental Analysis: Incremental analysis refers to the analysis of differential revenue that could…
Q: Road Master Shocks has 15,000 units of a defective product on hand that cost $80,000 to manufacture.…
A: This question deals with the preparing schedule to show selling defective units as scrap or rework.…
Q: Garcia Company has 11,500 units of its product that were produced at a cost of $172,500. The units…
A: In decision-making questions of Scrap or Rework analysis, the decision will be made on the basis of…
Q: Castillo Petroleum has spent $208,000 to refine 64,000 gallons of petroleum distillate, which can be…
A: The joint cost is the cost whose expenditure is for two or more products. In the joint cost, it is…
Q: XYZ Company is facing changes in its cost structure so that fixed costs will decrease from $800,000…
A: Net income can be defined as the difference between total revenues and total expenses. Expenses can…
Q: NUBD Co. has only 25,000 hours of machine time each month to manufacture its two products. Product X…
A: In the given question, the number of machine hours is limited and is absence of any information, it…
Q: Pumpkin Company needs 20,000 units of a certain part to use in one of its products. The following…
A: Variable cost means the cost which vary with the level of output and fixed cost means the cost which…
Q: A company must decide between scrapping or reworking units that do not pass inspection. The company…
A: Step 1: Workings for the answer:
Q: The X and Y Divisions are divisions in the same company. Currently the Y Division buys a part from X…
A: Part A: The minimum transfer price per unit for the part is the Total Variable Cost plus one third…
Q: Avery Company has two divisions, Polk and Bishop. Polk produces an item that Bishop could use in its…
A: Solution a: Operating profit will increase by = (outside purchase price - variable cost per unit) *…
Q: A company with excess capacity must decide between scrapping or reworking units that do not pass…
A: Prepare incremental income from selling the units as scrap and selling after reworking on units as…
Q: Holmes Company produces a product that can be either sold as is or processed further. Holmes has…
A:
Q: Varto Company has 7,000 units of its sole product in inventory that it produced last year at a cost…
A:
Q: Mitchell Company manufactures a product with a unit variable cost of $50 and a unit sales price of…
A: As accepting the special order will not affect the fixed cost and the present sales (given), so the…
Q: A company with excess capacity must decide between scrapping or reworking units that do not pass…
A: Given that, Defective units = 22000 Units Cost of manufacturing a defective unit = $6 per unit Sale…
Q: Kim Yin Company has 15,000 units in inventory that had a production cost of $3 per unit. These units…
A: Alternative 1 - profit /loss if reworked and then sold :- Total Sales price =…
Q: A company has already incurred $5,000 of costs in producing 6,000 units of Product XY. Product XY…
A: Given: Current selling price = $15 Further processing cost = $8 Selling price after further…
Q: A company with excess capacity must decide between scrapping or reworking units that do not pass…
A: Incremental analysis: Incremental analysis refers to the analysis of differential revenue that…
Q: Lusk Corporation produces and sells 15,000 units of Product X each month. The selling price of…
A: Solution: Contribution margin lost if discontinued = CM per unit * units = (40-32)*15000 = 120,000
Q: Collins Company has some outdated products that originally cost $80,000 to make. The products have…
A: Cost of reworking = $20,000 Differential Profit of reworking = $60,000 - $36,000 = $24,000
Q: Sage Company is operating at 90% of capacity and is currently purchasing a part used in its…
A: As posted multiple independent questions we are answering only first question kindly repost the…
Q: Smith Petroleum has spent $204,000 to refine 64,000 gallons of petroleum distillate, which can be…
A: Revenue is the amount of income earned by selling the goods or providing the services. The cost is…
Q: Cranberry has received a special order for 170 units of its product at a special price of $2,350.…
A: The variable cost are effected with changes in number of units produced. The fixed cost remains…
Q: Road master shocks has 15000 units of a defective product on hand that costs $80,000 to manufacture.…
A: In the given case there are two options where the company can either sell it as scrap or sell it…
Q: Almond has received a special order for 11,000 units of its product at a special price of $60. The…
A:
Q: . The relevant cost for IT Company to consider in making its decision is
A: For the purpose of decision making past costs i.e the cost which is already incurred is not…
Q: Lido manufactures A and B from a joint process (cost = $80,000). Five thousand pounds of A can be…
A: Incremental sales revenue from B = (Sales price per unit after further processing - Split off sales…
Q: Lusk Corporation produces and sells 16,000 units of Product X each month. The selling price of…
A: The company discontinues the production of any product when the product is generating loss or not…
Q: McPupper Steel has products that cost $10,500 to manufacture. The products can be sold as is for…
A: Incremental profit is the profit or loss associated with the change in the decision. The positive…
Q: Ahngram Corp. has 1,000 defective units of a product that cost $2.20 per unit in direct costs and…
A: Incremental net income (loss) from reworking the units = (Additional revenue per unit - rework costs…
Q: Sammy Co. has 24,000 defective units of a product that cost P8 per unit to manufacture, and can be…
A:
Q: Ross has received a special order for 10,000 units of its product at a special price of $15. The…
A: Contribution margin income statement: It is a kind of income statement which reports the sales,…
Q: Zycon has produced 10,000 units of partially finished Product A. These units cost $15,000 to…
A: Relevant cost is of great importance to the management and are incurred when specific decisions are…
Q: Hildesheim Company has 2,000 obsolete light fixtures that are carried in inventory at a…
A: Introduction: Opportunity cost: In simple terms , Cost for opportunity lost called as opportunity…
Q: Zycon has produced 10,000 units of partially finished Product A. These units cost $15,000 to…
A: The future differential cost is relevant in decision making and affects the decisions of the…
Q: A company with excess capacity must decide between scrapping or reworking units that do not pass…
A: Introduction: The sales associated with an increased quantity sold are known as incremental revenue.…
Q: Sage Company is operating at 90% of capacity and is currently purchasing a part used in its…
A: Formulas: Differential cost = Units*(Manufacturing cost - Variable cost of making)
Q: BCD Company has 7,000 obsolete toys carried in inventory at a manufacturing cost of Phó per unit. If…
A: Given that 7,000 toys are carried in inventory at a manufacturing cost of Ph6 per unit Total cost =…
Q: Ross has received a special order for 16,000 units of its product at a special price of $23. The…
A: Formulas: Profit = Number of units * (Offer price - Variable cost)
Q: he Lantern Corporation has 1,000 obsolete lanterns that are carried in inventory at a manufacturing…
A: In case of decisions to be made between two or more altenatives, then alternative which has maximum…
Q: NUBD Co. has only 25,000 hours of machine time each month to manufacture its two products. Product X…
A: Product X Product Y Contribution margin P50 P64 Divide by: machine hours per unit 5 8…
NUBD Co. has 24,000 defective units of a product that cost P8 per unit to manufacture, and can be sold for P4 per unit. These units can be reworked for P2 per unit and sold at their full price of P12 each. If NUBD reworks the defective units, how much incremental net income will result?
Step by step
Solved in 3 steps
- Jonfran Company manufactures three different models of paper shredders including the waste container, which serves as the base. While the shredder heads are different for all three models, the waste container is the same. The number of waste containers that Jonfran will need during the following years is estimated as follows: The equipment used to manufacture the waste container must be replaced because it is broken and cannot be repaired. The new equipment would have a purchase price of 945,000 with terms of 2/10, n/30; the companys policy is to take all purchase discounts. The freight on the equipment would be 11,000, and installation costs would total 22,900. The equipment would be purchased in December 20x4 and placed into service on January 1, 20x5. It would have a five-year economic life and would be treated as three-year property under MACRS. This equipment is expected to have a salvage value of 12,000 at the end of its economic life in 20x9. The new equipment would be more efficient than the old equipment, resulting in a 25 percent reduction in both direct materials and variable overhead. The savings in direct materials would result in an additional one-time decrease in working capital requirements of 2,500, resulting from a reduction in direct material inventories. This working capital reduction would be recognized at the time of equipment acquisition. The old equipment is fully depreciated and is not included in the fixed overhead. The old equipment from the plant can be sold for a salvage amount of 1,500. Rather than replace the equipment, one of Jonfrans production managers has suggested that the waste containers be purchased. One supplier has quoted a price of 27 per container. This price is 8 less than Jonfrans current manufacturing cost, which is as follows: Jonfran uses a plantwide fixed overhead rate in its operations. If the waste containers are purchased outside, the salary and benefits of one supervisor, included in fixed overhead at 45,000, would be eliminated. There would be no other changes in the other cash and noncash items included in fixed overhead except depreciation on the new equipment. Jonfran is subject to a 40 percent tax rate. Management assumes that all cash flows occur at the end of the year and uses a 12 percent after-tax discount rate. Required: 1. Prepare a schedule of cash flows for the make alternative. Calculate the NPV of the make alternative. 2. Prepare a schedule of cash flows for the buy alternative. Calculate the NPV of the buy alternative. 3. Which should Jonfran domake or buy the containers? What qualitative factors should be considered? (CMA adapted)Gelbart Company manufactures gas grills. Fixed costs amount to 16,335,000 per year. Variable costs per gas grill are 225, and the average price per gas grill is 600. Required: 1. How many gas grills must Gelbart Company sell to break even? 2. If Gelbart Company sells 46,775 gas grills in a year, what is the operating income? 3. If Gelbart Companys variable costs increase to 240 per grill while the price and fixed costs remain unchanged, what is the new break-even point?Zena Technology sells arc computer printers for $55 per unit. Unit product costs are: A special order to purchase 15,000 arc printers has recently been received from another company and Zena has idle capacity to fill the order. Zena will incur an additional $2 per printer for additional labor costs due to a slight modification the buyer wants made to the original product. One-third of the manufacturing overhead costs is fixed and will be incurred no matter how many units are produced. When negotiating the price, what is the minimum selling price that Zena should accept for this special order?
- Dimitri Designs has capacity to produce 30,000 desk chairs per year and is currently selling all 30,000 for $240 each. Country Enterprises has approached Dimitri to buy 800 chairs for $210 each. Dimitris normal variable cost is $165 per chair, including $50 per unit in direct labor per chair. Dimitri can produce the special order on an overtime shift, which means that direct labor would be paid overtime at 150% of the normal pay rate. The annual fixed costs will be unaffected by the special order and the contract will not disrupt any of Dimitris other operations. What will be the impact on profits of accepting the order?Delta Co. sells a product for $150 per unit. The variable cost per unit is $90 and fixed costs are $15,250. Delta Co.s tax rate is 36% and the company wants to earn $44,000 after taxes. What would be Deltas desired pre-tax income? What would be break-even point in units to reach the income goal of $44,000 after taxes? What would be break-even point in sales dollars to reach the income goal of $44000 after taxes? Create a contribution margin income statement to show that the break-even point calculated in B, generates the desired after-tax income.Thaler Company bought 26,000 of raw materials a year ago in anticipation of producing 5,000 units of a deluxe version of its product to be priced at 75 each. Now the price of the deluxe version has dropped to 35 each, and Thaler is now deciding whether to produce 1,500 units of the deluxe version at a cost of 48,000 or to scrap the project. What is the opportunity cost of this decision? a. 175,000 b. 375,000 c. 48,000 d. 26,000
- Walloon Company produced 150 defective units last month at a unit manufacturing cost of 30. The defective units were discovered before leaving the plant. Walloon can sell them as is for 20 or can rework them at a cost of 15 and sell them at the regular price of 50. What is the total relevant cost of reworking the defective units? a. 2,250 b. 3,000 c. 4,500 d. 6,750Bethany Company has just completed the first month of producing a new product but has not yet shipped any of this product. The product incurred variable manufacturing costs of 5,000,000, fixed manufacturing costs of 2,000,000, variable marketing costs of 1,000,000, and fixed marketing costs of 3,000,000. Under the variable costing concept, the inventory value of the new product would be: a. 5,000,000. b. 6,000,000. c. 8,000,000. d. 11,000,000.Mallorys Video Supply has changed its focus tremendously and as a result has dropped the selling price of DVD players from $45 to $38. Some units in the work-in-process inventory have costs of $30 per unit associated with them, but Mallory can only sell these units in their current state for $22 each. Otherwise, it will cost Mallory $11 per unit to rework these units so that they can be sold for $38 each. How much is the financial impact if the units are processed further? A. $5 per unit profit 8. $16 per unit profit C. $3 per unit loss D. $12 per unit loss
- Shelby Industries has a capacity to produce 45.000 oak shelves per year and is currently selling 40,000 shelves for $32 each. Martin Hardwoods has approached Shelby about buying 1,200 shelves for a new project and is willing to pay $26 each. The shelves can be packaged in bulk; this saves Shelby $1.50 per shelf compared to the normal packaging cost. Shelves have a unit variable cost of $27 with fixed costs of $350,000. Because the shelves dont require packaging, the unit variable costs for the special order will drop from $27 per shelf to $25.50 per shelf. Shelby has enough idle capacity to accept the contract. What is the minimum price per shelf that Shelby should accept for this special order?Oat Treats manufactures various types of cereal bars featuring oats. Simmons Cereal Company has approached Oat Treats with a proposal to sell the company its top selling oat cereal bar at a price of $27,500 for 20,000 bars. The costs shown are associated with production of 20,000 oat bars currently. The manufacturing overhead consists of $3,000 of variable costs with the balance being allocated to fixed costs. Should Oat Treats make or buy the oat bars?Morrill Company produces two different types of gauges: a density gauge and a thickness gauge. The segmented income statement for a typical quarter follows. Includes depreciation. The density gauge uses a subassembly that is purchased from an external supplier for 25 per unit. Each quarter, 2,000 subassemblies are purchased. All units produced are sold, and there are no ending inventories of subassemblies. Morrill is considering making the subassembly rather than buying it. Unit-level variable manufacturing costs are as follows: No significant non-unit-level costs are incurred. Morrill is considering two alternatives to supply the productive capacity for the subassembly. 1. Lease the needed space and equipment at a cost of 27,000 per quarter for the space and 10,000 per quarter for a supervisor. There are no other fixed expenses. 2. Drop the thickness gauge. The equipment could be adapted with virtually no cost and the existing space utilized to produce the subassembly. The direct fixed expenses, including supervision, would be 38,000, 8,000 of which is depreciation on equipment. If the thickness gauge is dropped, sales of the density gauge will not be affected. Required: 1. Should Morrill Company make or buy the subassembly? If it makes the subassembly, which alternative should be chosen? Explain and provide supporting computations. 2. Suppose that dropping the thickness gauge will decrease sales of the density gauge by 10 percent. What effect does this have on the decision? 3. Assume that dropping the thickness gauge decreases sales of the density gauge by 10 percent and that 2,800 subassemblies are required per quarter. As before, assume that there are no ending inventories of subassemblies and that all units produced are sold. Assume also that the per-unit sales price and variable costs are the same as in Requirement 1. Include the leasing alternative in your consideration. Now, what is the correct decision?
