Oxygen supply for a lung related deficiency is supplied to patients from bottled oxygen in gaseous form. The oxygen bottles are considered empty when they are at 2 bar absolute (and at a room temperature of 20 °C) and are filled from a large source of gaseous oxygen at 210 bar absolute and 10 °C and the valve filling the cylinder is closed when the pressure in the cylinder reaches 200 bar absolute. If the heat transfer during the filling process is negligibly small and neglecting velocity and height contributions, calculate the final temperature of the oxygen in the cylinder at the moment of filling valve closure and the mass of oxygen filled into the cylinder. Take the internal volume of the cylinder to be 15 litre. If the cylinder eventually comes to thermal equilibrium with the surroundings at 20 °C what is the final pressure of the oxygen in the cylinder.

Oxygen supply for a lung related deficiency is supplied to patients from bottled oxygen in gaseous form. The oxygen bottles are considered empty when they are at 2 bar absolute (and at a room temperature of 20 °C) and are filled from a large source of gaseous oxygen at 210 bar absolute and 10 °C and the valve filling the cylinder is closed when the pressure in the cylinder reaches 200 bar absolute. If the heat transfer during the filling process is negligibly small and neglecting velocity and height contributions, calculate the final temperature of the oxygen in the cylinder at the moment of filling valve closure and the mass of oxygen filled into the cylinder. Take the internal volume of the cylinder to be 15 litre. If the cylinder eventually comes to thermal equilibrium with the surroundings at 20 °C what is the final pressure of the oxygen in the cylinder.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A certain mass of air confined in a tank has an initial temp of 21 degress centigrade and an initialabsolute pressure of 1.2 bar.If the gas is heated until the final absolute pressure is 2.8 bar. What is the final temperature of the gas in degrees Celsius?
A motorist equips his automobile tires with a relief-type valve so that the pressure inside the tire never will exceed 240 kPa (gage). He starts a trip with a pressure of 200kPa (gage) and a temperature of 23˚C in the tires. During the long drive, the temperature of the air in the tires reaches 83˚C. Each tire contains 0.11kg of air. Determine (a) the mass of air escaping each tire, (b) the pressure of the tire when the temperature returns to 23˚C.
Air at 10.0°C and normal atmospheric pressure is used to inflate the tires in an automobile. When inflated to the desired amount, the air inside the tire is compressed to 28.5% of its original volume while the temperature goes up to 46.0°C. (a) Determine the value of the tire pressure. (b) The owner of the car drives it at high speed for a while. At the end of the trip the temperature rises to 85.0°C and the inner volume of the tire increases by 4.90%. Determine the new absolute tire pressure.
An air bubble rises from the bottom of a well where the temperature is 25oC, to the surface where the temperature is 27o If the depth of the well is 5m and the atmospheric pressure is 101.325kPa, determine the following: Initial pressure inside the air bubble (P1). Volume of air bubble at state 1. Volume of air bubble at state 2. Percent increase in volume of the bubble.
Air is compressed in a compressor through the purely polytropic, purely isothermal, and intercooling as shown in the diagram between the same pressure limits. Select the process that is purely isothermal_____________ A. 1-X'-2' B. 1-X-X'-2 C. 1-X-2"
5. An air receiver of volume 6 m3 contains air at 15 bar and 40.5°C. A valve is opened and some air is allowed to blow out to atmosphere. The pressure of the air in the receiver drops rapidly to 12 bar when the valve is then closed. Calculate the mass of air which has left the receiver.
2.8 The setup shown provides a liquid flow through the tissues for a physiological experiment. Taking readings h1(t) and h2(t), develop an expression for the storage rate of the liquid in the tissue. Identify your choice of control volume very carefully.
Air is compressed into a 90 ft3 rigid tank until the pressure is 30.5 psia and the temperature becomes 580 0R. What is the mass of the air in lbm and the change in pressure when the temperature decreases to 300 0R Rair = 53.342 ft-lbf/ lbm-0R (c) What is the final pressure of the gas? (The value of gas constant, R = 0.4615 kJ/kg-K, Cp = 1.8723 kJ/kg-K, Cv = 1.4108 kJ/kg-K)
2. If 37 kJ of heat is applied to a non-flow system while 54 kJ of work is done by thesystem, determine the magnitude of the change in the internal energy and explain thedirection of this change. Explain the relationships between system constants for a perfect gas
An ideal gas passes a diffuser. At the diffuser inlet, the temperature is T1 = 350.00 K, the pressure P1 = 100.00 kPa, the velocity V1 = 200.00 m/s, and the inlet area A1 = 0.30 m2. At the exit, the velocity is very small. The specific heat of the ideal gas at the constant pressure is cp = 1.0050 kJ/(kg·K). The gas constant is R = 0.2870 kPa·m3/(kg·K). Determine the density at the inlet, ρ1 __________(kg/m3)
Air is compressed in a compressor through the purely polytropic, purely isothermal, and intercooling as shown in the diagram between the same pressure limits. Select the process that is purely polytropic_____________ A. 1-X'-2' B. 1-X-X'-2 C. 1-X-2"
Helium is used in the Carnot engine where the volumes beginning with constant temperature heat addition are V1= 0.3565 m3; V2= 0.5130 m3; V3= 8.0 m3; V4= 5.57 m3. Determine the thermal efficiency. Use 1.66 as the specific ratio of helium.