Two ladders, 4.00 m and 3.00 m long, are hinged at point Aand tied together by a horizontal rope 0.90 m above the floor(Figure 1). The ladders weigh 480 N and 360 N,respectively, and the center of gravity of each is at its center.Assume that the floor is freshly waxed and frictionless.Part AFind the upward force at the bottom of the left ladder.Express your answer with the appropriate units.HÀFL =ValueUnitsPart BFigure< 1 of 1Find the upward force at the bottom of the right ladder.Express your answer with the appropriate units.FR =ValueUnits4.00 m3.00 m不0.90 mPart CFind the tension in the rope. Two ladders, 4.00 m and 3.00 m long, are hinged at point Aand tied together by a horizontal rope 0.90 m above the floor(Figure 1). The ladders weigh 480 N and 360 N,respectively, and the center of gravity of each is at its center.Assume that the floor is freshly waxed and frictionless.Part CFind the tension in the rope.Express your answer with the appropriate units.HAT =ValueUnitsPart DFind the magnitude of the force one ladder exerts on the other at point AFigure1 of 1 >Express your answer with the appropriate units.HAF =ValueUnits4.00 m3.00 m0.90 mPart EIf an 800 N painter stands at point A, find the tension in the horizontal rope.Express your answer with the appropriate units.

Name: Two ladders, 4.00 m and 3.00 m long, are hinged at point Aand tied to
Uploaded: 2024-03-20T06:56:46.000Z
Channel: Bartleby
Description: Two ladders, 4.00 m and 3.00 m long, are hinged at point Aand tied together by a horizontal rope 0.90 m above the floor(Figure 1). The ladders weigh 480 N and 360 N,respectively, and the center of gravity of each is at its center.Assume that the flo

Answered: Image /qna-images/answer/17d19d3f-f10f-4c22-b63e-e1c6f062aa26.jpg

Science

Physics

Part A Find the upward force at the bottom of the left ladder. Express your answer with the appropriate units. HÀ FL = Value Units Part B Find the upward force at the bottom of the right ladder. Express your answer with the appropriate units. ? FR = Value Units

Part A Find the upward force at the bottom of the left ladder. Express your answer with the appropriate units. HÀ FL = Value Units Part B Find the upward force at the bottom of the right ladder. Express your answer with the appropriate units. ? FR = Value Units

Glencoe Physics: Principles and Problems, Student Edition

1st Edition

ISBN:9780078807213

Author:Paul W. Zitzewitz

Publisher:Paul W. Zitzewitz

Chapter8: Rotational Motion

Section: Chapter Questions

Problem 74A

See similar textbooks

Similar questions

A stepladder of negligible weight is constructed as shown in Figure P10.73, with AC = BC = = 4.00 m. A painter of mass m = 70.0 kg stands on the ladder d = 3.00 m from the bottom. Assuming the floor is frictionless, find (a) the tension in the horizontal bar DE connecting the two halves of the ladder, (b) the normal forces at A and B, and (c) the components of the reaction force at the single hinge C that the left half of the ladder exerts on the right half. Suggestion: Treat the ladder as a single object, but also treat each half of the ladder separately.
A wooden door 2.1 m high and 0.90 m wide is hung by two hinges 1.8 m apart. The lower hinge is 15 cm above the bottom of the door. The center of mass of the door is at its geometric center, and the weight of the door is 260 N, which is supported equally by both hinges. Find the horizontal force exerted by each hinge on the door.
A stepladder of negligible weight is constructed as shown in Figure P12.40, with AC = BC = = 4.00 m. A painter of mass m = 70.0 kg stands on the ladder d = 3.00 m from the bottom. Assuming the floor is frictionless, find (a) the tension in the horizontal bar DE connecting the two halves of the ladder, (b) the normal forces at A and B, and (c) the components of the reaction force at the single hinge C that the left half of the ladder exerts on the right half. Suggestion: Treat the ladder as a single object, but also treat each half of the ladder separately. Figure P12.40 Problems 40 and 41.
What three factors affect the torque created by a force relative to a specific pivot point?
In Figure 9.21, the cg of the pole held by the pole vaulter is 2.00 m from the left hand, and the hands are 0.700 m apart. Calculate the force exerted by (a) his right hand and (b) his left hand. (c) If each hand supports half the weight of the pole in Figure 9.19, show that the second condition for equilibrium (net =0 ) is satisfied for a pivot other than the one located at the center of gravity of the pole. Explicitly show how you follow the steps in the Problem-Solving Strategy for static equilibrium described above. Figure 9.21 A pole vaulter is holding a pole horizontally with both hands. The center of gravity is to the left side of the vaulter.
A stepladder of negligible weight is constructed as shown in Figure P10.73, with AC = BC = ℓ. A painter of mass m stands on the ladder a distance d from the bottom. Assuming the floor is frictionless, find (a) the tension in the horizontal bar DE connecting the two halves of the ladder, (b) the normal forces at A and B, and (c) the components of the reaction force at the single hinge C that the left half of the ladder exerts on the right half. Suggestion: Treat the ladder as a single object, but also treat each half of the ladder separately. Figure P10.73 Problems 73 and 74.
A uniform horizontal strut weighs 400.0 N. One end of the strut is attached to a hinged support the wall and the other end of the strut is attached to a sign that weighs 200.0 N The strut is also supported by a cable attached between the end of the strut and the wall. Assuming that the entire weight of the sign is attached at the very end of the s find the tension in the cable and the force at the hinge of the strut.
When tightening a bolt, you push perpendicularly on a wrench with a force of 165N at a distance of 0.140m from the center of the bolt. How much torque are you exerting relative to the center of the bolt?
A person carries a plank of wood 2.00 m long with one hand pushing down on it at one end with a force F1 and the other hand holding it up at .500 m from the end of the plank with force F2. If the plank has a mass of 20.0 kg and its center of gravity is at the middle of the plank, what are the magnitudes of the forces F1 and F2?
a horizontal rod (m=5.2 kg) is hinged to a wall at the left end and three forces are acting on the rod as shown in the figure: the force of gravity (mg), a tension force (T), and the force exerted by the hinge (broken into components Fx and Fy) If theta = 35 degrees, what must T be equal to in order to keep the rod static?
A uniform plank of length 5 m and weight 200 N rests horizontally on two supports with 1.1 m of the plank hanging over the right support. To what distance x, can a person who weights 430 N walk on the overhanging part of the plank before it just starts to tip? What is the net torque around the pivot point (take the FR support as the pivot point)?
A sign is supported by a uniform horizontal boom of length 3.10 m and weight 72.0 N. A cable, inclined at an angle of 16 °with the boom, is attached at a distance of 2.71 m from the hinge at the wall. The weight of the sign is 108.0 N. What is the tension in the cable and what are the horizontal and vertical forces Fx and Fy exerted on the boom by the hinge? Comment on the magnitude of Fy. T= In N Fx= in N Fy= in N The magnitude of Fy is select (small or large) compared to that of Fx and T.