Part C ReviewLearning Goal:the pulley is masslessExpress your answer to three significant figures and include the appropriate units.To draw the free-body diagram of a point particle, use the equations ofequilibrium to find unknown forces, and understand how frictionlesspulleys affect the transfer of force in a cable.• View Available Hint(s)As shown, a mass is suspended from a cable that wraps around africtionless and massless pulley. The cable connects to a linear elasticspring. For this problem, treat the pulley as a point particle at B.W = 1810 NSubmitPrevious Answers(Figure 1)v CorrectCorrect answer is shown. Your answer 1813.5 N was either rounded differently or used a different number of significant figures than required for this part.Part B showed that the weight of the hanging mass is equal to the force on the spring, W = F,. This answer is expected from your instructions on pulleys. Itshould have been made clear that frictionless pulleys will only redirect a force. The proof of this will be learned at a later time.Part C - Determining the displacement of a springThe cable segment attached to the spring is at an angle of o = 50.0° from the ground. The spring has a spring constant of k = 15.5 kN/m. The pulley is attached tothe ceiling by rod BD that forms an angle 0 = 70.0° with the ceiling. The hanging mass causes a tension of 3408 N in rod BD. What is the displacement of thespring?Express your answer to three significant figures and include the appropriate units.• View Available Hint(s)Figure1 of 1>HẢ?s =ValueUnitsDSubmitPrevious AnswersBPart D Complete previous part(s)

Given: ϕ=50° θ =70° TBD=3408N

Part C- Determining the displacement of a spring The cable segment attached to the spring is at an angle of o = 50.0° from the ground. The spring has a spring constant of k = 15.5 kN/m . The pulley is attached to the ceiling by rod BD that forms an angle e = 70.0° with the ceiling. The hanging mass causes a tension of 3408 N in rod BD. What is the displacement of the spring? Express your answer to three significant figures and include the appropriate units. > View Available Hint(s) HẢ + Value Units Submit Previous Answers

Part C- Determining the displacement of a spring The cable segment attached to the spring is at an angle of o = 50.0° from the ground. The spring has a spring constant of k = 15.5 kN/m . The pulley is attached to the ceiling by rod BD that forms an angle e = 70.0° with the ceiling. The hanging mass causes a tension of 3408 N in rod BD. What is the displacement of the spring? Express your answer to three significant figures and include the appropriate units. > View Available Hint(s) HẢ + Value Units Submit Previous Answers

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.26P

See similar textbooks

Similar questions

Two homogeneous spheres of mass M radius R joined by a bar of length L, negligible mass, and suspended from their geometric center by a string such that when rotated ϕ exerts torque −kϕ with k torsion coefficient of the wire. The air exerts dissipative effect F = −6πηv on each sphere, where η is the viscosity of the air and v is the linear velocity of each sphere. If I is the moment of inertia of a sphere with respect to the vertical axis that passes through the wire, determine the damping factor and natural frequency. (image 2)
What factor is required for a relative motion to exist between a fluid and a freely suspended particle?
can you help me solve this question about equlibrium of a particle using the polygon method? four pieces of string are tied to a massless ring. the forces acting on the ring are in gram-force.
An intrepid treasure-salvage group has discovered a steelbox, containing gold doubloons and other valuables, restingin 80 ft of seawater. They estimate the weight of thebox and treasure (in air) at 7000 lbf. Their plan is to attachthe box to a sturdy balloon, infl ated with air to 3 atm pressure.The empty balloon weighs 250 lbf. The box is 2 ftwide, 5 ft long, and 18 in high. What is the proper diameterof the balloon to ensure an upward lift force on the box thatis 20 percent more than required?
An amusement park is designing a new ride. The ride is to have a motorized horizontal launch section that is 5m long. For safety the ride cars will be limited to ⅓g worth of acceleration and will have a typical loaded mass of 400kg. What is the maximum launch velocity of this situation, and what engine power rating is necessary to achieve this velocity?
Two homogeneous spheres of mass M radius R joined by a bar of length L = 2R, negligible mass, and suspended from its geometric center by a rope such that when rotated ϕ exerts torque −kϕ with k torsion coefficient of the wire. The air exerts dissipative effect F = −6πηv on each sphere, where η is the viscosity of the air and v is the linear velocity of each sphere. If I0 = 25MR2 is the moment of inertia of a sphere with respect to its center of mass (image 1)determine the equation of motion of the pendulum. (image 2)
Construct a flow diagram illustrating the mass and energy exchange between a shining light bub and its surroundings. Include also if energy is generated or consumed within the system boundary. Is it movable or rigid?
What trigonometric identity may be used to summarize an equation for calculating tension force (the long equation you'll use before replacing the values)? What do you think the role of mass is in determining the net acceleration of an item rolling down an incline? Friction is a significant factor. Why is the normal force no longer equal to the weight of all things on an incline?
A 8.0 kg sign hangs from the end of a metal rod with a length of 1.5 m, with its own mass of 3.0 kg. A thin, massless chain is attached to the wall 0.200m above the rod, and connects to the rod 1.30 m from the wall. Obviously, this sign is meant to remain stationary. In order for that to be true, what is the net force supplied by the wall on the rod and at what angle above the horizontal?
Metal spheres, 10 mm in diameter, are to be annealed by heating them to 827°C then allowing them to cool slowly in air at 27°C to the point where they are in thermal equilibrium with the air. 2000 balls are annealed in one hour’s time. What is the total rate of their heat transfer if they are made of steel, lead, or copper? a.Sketch the problem. b.Draw lines identifying the control volume, or control mass. c.Identify the states with numbers, letters, or descriptions such as “in” and “out”. d.Write down the knowns and unknowns. e.Identify what is being asked for. f.State all assumptions.
another question: Within the field of mechanical engineering, what are the intricate interplays between fluid dynamics, heat transfer, and thermodynamics that engineers must meticulously analyze and optimize in order to design highly efficient and compact cooling systems for electronic devices, and how do these advancements contribute to the continuous evolution of computing technology and its diverse applications in modern society
Please help me in solving this question about free fall motion.Please send a solution or drawing.