Prob. 9: A 35 N plate of metal having dimensions 1.2 m × 1.2 m x 2mm is to be lifted up with a velocity of 0.14 m/s through an infinitely extending gap 26 mm wide containing an oil of specific gravity 0.90 and viscosity 21.6 poise. Find the force required to lift up the plate assuming the plate to remain midway in the gap. 0.14 m.s 12 mm 12 mm 2 mm 26 mm Smer Har

Prob. 9: A 35 N plate of metal having dimensions 1.2 m × 1.2 m x 2mm is to be lifted up with a velocity of 0.14 m/s through an infinitely extending gap 26 mm wide containing an oil of specific gravity 0.90 and viscosity 21.6 poise. Find the force required to lift up the plate assuming the plate to remain midway in the gap. 0.14 m.s 12 mm 12 mm 2 mm 26 mm Smer Har

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A shaft 70-mm in diameter is being pushed at a speed of 400mm/s through a bearing sleeve 70.2-mm in diameter and 250mm long. The clearance is filled with oil with a kinematic viscosity of v = 0.005 ?2/? and SG=0.9. Find the frictional resistance exerted by the oil on the shaft in Newtons (N).
An oil film of thickness 1.5 mm is used for lubrication between asquare plate of size 0.9 m × 0.9 m and an inclined plane having anangle of inclination 200. The weight of the square plate is 392.4 N andit slides down the plane with a uniform velocity of 0.2 m/s. Find thedynamic viscosity of the oil
13.14 What is the minimum surface tension of a fluid that can sustain a gauge pressure of 0.1 kPa in a 0.5 cm radius bubble?
At 0.5m/s, engine oil with a kinematic viscosity of 0.00024m2/s flows inside an annulus. A 3-in schedule 40 (ID= 3.068in) and a 1-in schedule 40 (OD= 1.32in; ID= 1.049in) concentric steel pipe 10cm long form the annulus. What is the pressure drop in terms of oil meters?
Calcuale the viscosity of the oil if the sp. gr. 0.8 is measured by a capillary tube of diameter 50 mm. The difference of pressure head between two points 3 m apart is 0.6 m of water. The mass of oil collected in a measuring tank is 50 kg in 1 min
Find the head lost due to friction in a pipe of radius 20 cm and length 50m, through which oil is flowing at a velocity of 5 m/s using (a) Darcy formula (b) Chezy formula for which C= 65, Take Specific gravity of the oil is 0.8 and Dynamic viscosity is 8 X 10-3 poise.
A shaft 70-mm in diameter is being pushed at a speed of 400mm/s through a bearing sleeve 70.2-mm in diameter and 250mm long. The clearance is filled with oil with a kinematic viscosity of v = 0.005 ?2/? and SG=0.9. Find the frictional resistance exerted by the oil on the shaft in Newtons (N). And when the shaft is fixed axially and rotated inside the sleeve at 2000 rpm, determine the resisting torque exerted by the oil and the power required to rotate the shaft in kiloWatts (kW).
3.1 A cylindrical plug, 120mm long with a diameter of 95 mm, slides concentrically in a fixed cylinderwith an internal diameter of 95,2 mm. The radial clearance is filled with oil with a viscosity of 0.2 Pa.sCalculate the Force required to slide the plug along the cylinder at a speed of 5 m/s against the viscousresistance of the oil, the power lost due to the viscous resistance and the Kinematic viscosity of the oil ifits density is 850 kg/m 3 . A pressure intensifier is used in reverse deboost the pressure in a hydraulic system from 15MPa to7MPa. The volume of fluid required in the low pressure side is 700ml and the length of the stroke of thepiston is to be half the diameter of the low pressure piston. Calculate the diameters of the high-pressureand low pressure sides as well as the stroke length of the piston.
A sleeve of 10cm encases a vertical metal rod 3.0cm in diameter with radial clearance of 0.02mm. if when immersed in oil of viscosity 6.0 poise , the effective weight of the sleeve is 7.5N , will the sleeve slide down the rod and if so, at what velocity?
plzz help meeeeeeeeee The belt moves at a steady velocity V and skims the top of oil tank. Assuming a linear velocity profile in the oil, what is the required belt-drive power P (watt) (P= power = force x Velocity) if the belt moves at 3.5 m/s over oil with specific gravity of S=3.6 and oil viscosity of 0.004 m2/s. Belt geometry L= 2 m, b = 60 cm, and oil depth is h = 3 cm?
steel tape 0.5 mm thick and 20 mm wide is pulled by a force F through a slit opening 1.5 mm and length 15 mm. Considering that the tape is centered on the slit, that lubricating oil of viscosity µ = 0.4 Nm-2s? fills the gap spaces not occupied by the tape and that the maximum tape speed is 10 m/s, calculate the maximum force F. Expected Answer: Maximum Force = 4.8N
Two parallel plates, one moving at 4 m/s and the otherfi xed, are separated by a 5-mm-thick layer of oil of specific gravity 0.80 and kinematic viscosity 1.25 E-4 m 2 /s.What is the average shear stress in the oil?( a ) 80 Pa, ( b ) 100 Pa, ( c ) 125 Pa, ( d ) 160 Pa, ( e ) 200 Pa