Problem 2: A composite shaft is composed of a solid section AB and a tubular section BC, bothof which have circular cross sections. Section AB is made of steel and has a radius of 1 in.Section BC consists of a brass core, with a radius of 0.5 in, surrounded by a steel tube, with aninner radius of 0.5 in and an outer radius of 1 in. Use G§ = 11,500 ksi for steel and Gü = 5600 ksifor brass. The shaft is attached to a fixed support at A, and a torque of T = 50 ft-lb is applied atthe free end C.0.5 in1 in2 ftBT = 50 ft-lb3 ft(a) Calculate the total angle of twist(magnitude only) between A and C.(b) Calculate the maximum shear stress in thebrass.(c) Calculate the maximum shear stress in thesteel.

Answered: Image /qna-images/answer/1e834675-311d-4c74-81f4-a6312d46f141.jpg

Problem 2: A composite shaft is composed of a solid section AB and a tubular section BC, both of which have circular cross sections. Section AB is made of steel and has a radius of 1 in. Section BC consists of a brass core, with a radius of 0.5 in, surrounded by a steel tube, with an inner radius of 0.5 in and an outer radius of 1 in. Use Gs = 11,500 ksi for steel and G₁ = 5600 ksi for brass. The shaft is attached to a fixed support at A, and a torque of T = 50 ft-lb is applied at the free end C. 0.5 in 1 in C 2 ft B T = 50 ft-lb 3 ft (a) Calculate the total angle of twist (magnitude only) between A and C. (b) Calculate the maximum shear stress in the brass. (c) Calculate the maximum shear stress in the steel.

Problem 2: A composite shaft is composed of a solid section AB and a tubular section BC, both of which have circular cross sections. Section AB is made of steel and has a radius of 1 in. Section BC consists of a brass core, with a radius of 0.5 in, surrounded by a steel tube, with an inner radius of 0.5 in and an outer radius of 1 in. Use Gs = 11,500 ksi for steel and G₁ = 5600 ksi for brass. The shaft is attached to a fixed support at A, and a torque of T = 50 ft-lb is applied at the free end C. 0.5 in 1 in C 2 ft B T = 50 ft-lb 3 ft (a) Calculate the total angle of twist (magnitude only) between A and C. (b) Calculate the maximum shear stress in the brass. (c) Calculate the maximum shear stress in the steel.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Problem: 1 A line shaft rotating at 55 RPS is to transmit 28 kW. The shaft may be assumed to be made of mild steel with an allowable shear stress of 85 MPa. Determine the diameter of the shaft, neglecting the bending moment on the shaft.
Design a hallow shaft (Diameter and length) that develops 80 kW of power while rotating at a speed of 4000 rpm. The design constrains are as under:The angle of twist not to exceed 0.200Shear stress is not to exceed 480 MN/m2The outer diameter is to be twice the inner diameter. The shaft length is to be three times the outer diameter. Modulus of rigidity = 79 GN/m2.
A compound shaft consists of two segments. Segment (1) is a solid bronze [G = 45 GPa] shaft with an outside diameter of 80 mm, a length L1 = 780 mm, and allowable shear stress of 65 MPa. Segment (2) is a solid aluminum alloy [G = 26 GPa ksi] shaft with an outside diameter of 95 mm, a length L2 = 620 mm, and allowable shear stress of 40 MPa. The maximum rotation angle at the free end of the compound shaft must be limited to φA ≤ 2.5°. Determine the magnitude of the largest torque TA that may be applied at A.
A solid steel shaft ABCDE turns freely in bearings at points A and E. The shaft is driven by the gear at C which applies a torque T2= 325 lb-ft. Gears at B and D arc driven by the shaft and have resisting torques T1= 200 lb-ft and T3= 125 lb-ft, respectively. Segments BC and CD have lengths LBC= 20 in. and LCD= 15 in. and the shear modulus G = 11,600 ksi. Determine the minimum required diameter (d) of the shaft if the allowable shear stress 6 ksi. Also calculate the angle of twist between gears B and D
Problem: 2 A solid shaft is transmitting 9 KW at 550 r.p.m. Determine the diameter of the shaft if the maximum torque transmitted exceeds the mean torque by 20%. Take the maximum allowable shear stress as 78 MPa.
Q.12A solid shaft of diameter 'd' and length " issubjected to torque T. Another shaft B ofsome length, material but twice the diameter is subjected to the torque 2T. The ratio of the angle of twist of shaft A to shaft B is-
Determine the minimum diameter that can be used for a solid circular steel shaft which is limited to an allowable shear stress of 70 MPa and a maximum angle of twist of 1.5o (degrees) per meter length. Applied maximum torque is 25 KN-m and the overall shaft length is 1.25 meters. Shear modulus = G= 80 GPa Note: When using torsion stress formulas, you must convert the angle of twist from degrees to radians.
The torque transmitted by a solid shaft of diameter 10 mm and shear stress 75 MPa Select one: a. 14.72x109 N-m b. 14.72 kN-m c. 147.2 N-mm d. 14.72 N-m
A tubular steel [G = 79 GPa] shaft with an outside diameter of D = 89 mm and a wall thickness of t = 4 mm must not twist more than 0.071 rad in a 5.4-m length. Determine the maximum power P that the shaft can transmit at 310 rpm.
A compound shaft drives several pulleys, as shown. Segments (1) and (2) of the compound shaft are hollow aluminum (G = 4000 ksi) shafts that have a polar moment of inertia of J = 2.835 in4. Segments (3) and (4) are solid steel (G = 12000 ksi) shafts that have polar moment inertia of J = 1.024 in4. The bearings shown allow the shaft to turn freely. Assume TB = 980 lb.ft TD= 525 lb.ft TE = 130lb.ft L1 =74in L2 =29in L3 =34in L4 =35in. Calculate the rotation angle (including the correct sign) of pulley E with respect to point A.
Problem 2: Determine the minimal value of a radius of the circular-solid shaft in problem 1 such that the maximum shear stress due to the torsion is smaller than 1.0 MPa
A solid steel shaft ABCDE turns freely in bearings at points A and E. The shaft is driven by the gear at C,which applies a torque T2 = 325lb−ft. Gears at B and D are driven by the shaft and have resisting torquesT1 = 200lb − ft and T3 = 125lb − ft, respectively. Segments BC and CD have lengths LBC = 20 in. andLCD = 15 in. and the shear modulus G = 11, 600ksi. Determine the minimum required diameter (d) ofthe shaft if the allowable shear stress τa = 6ksi. Also calculate the angle of twist between gears B and D.