Problem (4.9): An embankment of (3m) high is to be constructed as shown in the figurebelow. If the unit weight of compacted soil is 19 kN/m³, calculate the vertical stressdue to the embankment loading at (A), (B), and (C) points.6m4.5m+1.5m i1.5m +1:1 slope3m1:1 slopeY soil = 19 kN/m33mВ

Solution: Considering the Diagram 1. Vertical Stress at A: By considering the FigureσzA=σz1+σz2Left…

Problem (4.9): An embankment of (3m) high is to be constructed as shown in the figure below. If the unit weight of compacted soil is 19 kN/m°, calculate the vertical stress due to the embankment loading at (A), (B), and (C) points. 6m 4.5m 1.5m i1.5m 1:1 slope 1:1 slope 3m Y soil =19 kN/m³ 3m

Problem (4.9): An embankment of (3m) high is to be constructed as shown in the figure below. If the unit weight of compacted soil is 19 kN/m°, calculate the vertical stress due to the embankment loading at (A), (B), and (C) points. 6m 4.5m 1.5m i1.5m 1:1 slope 1:1 slope 3m Y soil =19 kN/m³ 3m

Principles of Foundation Engineering (MindTap Course List)

8th Edition

ISBN:9781305081550

Author:Braja M. Das

Publisher:Braja M. Das

Chapter6: Vertical Stress Increase In Soil

Section: Chapter Questions

Problem 6.11P

See similar textbooks

Related questions

Q: A 6m high vertical retaining wall is used to retain a soil of unit weight 18 kN/m³ and slope 20°.…

A: Given: Height of wall, H = 6 m Slope angle, β = 20° Internal friction angle, ϕ= 40° Unit weight of…

Q: Compute the vertical pressure at a depth of 6 m below the ground surface at the following locations:…

A: Given data Top width = 8 m, height = 4 m, side slopes= I V : 1.5 Hor unit weight of soil, γ=21kN/m3…

Q: 15 m C IN 2 3.5 m 3.5 m BA 2 Unit weight y = 19 kN/m³ 8 m ↓

Q: A 6m high vertical retaining wall is used to retain a soil of unit weight 18 kN/m3 and slope 20°.…

A: Given: Height of wall, H = 6 m Slope angle, β = 20° Internal friction angle, ϕ = 40° Unit weight of…

Q: Problem 1: A concrete dam retaining water is shown in the figure below. The head of water on the…

Q: 3. For the dam retaining water as shown in the figure, the foundation soil is permeable; assume…

A: The unit weight of the concrete is γ=23.5 kN/m3.

Q: If the gauge of the railroad shown on the plan above is 1.7 m and produces a line-like loading at…

A: Data given;Gauge of railroad= 1.7mdistance (Y) = 1.9mDepth = 0.5mFormula used:I=1π(2×θ+sin2θ)

Q: 9.5 A cut is made in stiff saturated clay that is underlain by a layer of sand. (See Figure 9.10).…

A: Stability is given by :σA=uA

Q: and right embankments are 11 and 13 kN/m³, respectively. Determine the stress increase Two…

Q: and right embankments are 11 and 13 kN/m', respectively. Determine the stress increase under the…

A: The values and diagram given in the question are as follows: Unit weight of left embankment(γ1)=11…

Q: A soil profile consists of 6m thick clay soil over 3m thick sand soil, which in turn lies over a…

A: using concept of effective stress

Q: An embankment is to be constructed with a granular soil (bulk unit weight = 20 kN/m³) on a saturated…

Q: A masonry dam (sp.gr. = 2.4) of trapezoidal cross-section is 20 m high. It has a thickness of 2 m at…

Q: A saturated clay slope is sliding along with a circularly cylinder failure surface shown in the…

Q: (Use The Figure (10.20) to find the solution of this question) Two embankments loads on silty clay…

A: Given, γleft = 11 kN/m3 γright = 13 kN/m3

Q: It is required to design a cantilever retaining wall to retain a 5.0 m high sandy backfill. The…

A: Solution

Q: A concrete dam retaining water is shown in the figure. If the specific weight of the concrete is…

A: Given a concrete dam retaining water having specific weight of the concrete 23.5 kN/m3.

Q: The following is a sketch of the proposed embankment, calculate the addition of vertical stress…

Q: Refer to Figure P15.7. Given: γ = 17.5 kN/m3, c = 30 kN/m2, and center-to-center spacing of struts…

A: Strut A strut is an element that has a wide variety of applications in various industries like…

Q: A highway embankment is shown in the figure below. If the unit weight of the soil in the embankment…

A: Given: The unit weight of the soil is 17.5 kN/m3. Consider the figure,

Q: Figure below gives details of an embankment to be made of cohesive soil with c, = 20 kPa. Unit…

A: The weight of the sector is 329 kN. The cohesion is cu=20 kPa. The unit weight is γ=19 kN/m3. The…

Q: A soil profile consists of 6m thick clay soil over 3m thick sand soil, which in turn lies over a…

A: effective stress= total vertical stress- pore pressure

Q: A soil section, as shown in Figure P7.18, has a perched groundwater level. Plot the vertical total…

A: The given figure is shown below:

Q: 2 An unsupported excavation is made to the maximum possible depth in a clay soil having Y₁ = 18…

Q: Problem 1: A concrete dam retaining water is shown in the figure below. The head of water on the…

Q: 5. What is the factor of safety against overturning for the triangular dam? Determine the pressure…

Q: 3.24 Refer to the 15-ft high embankment shown in Figure 3.8. Embankments are generally constructed…

A: Given information:

Q: The cross-section of a braced cut on a stiff, fissured clay (Y = 19 kN/m³, C = 40 kN/m2) is as shown…

A: Given data,

Q: Two embankments loads on silty clay soils layers as shown below. Unit weights of the left right…

Q: A concrete dam retaining water shown below. If the specific weight of water is 23.5 kN/m2, find the…

A: Formula to calculate the factor of safety against overturning as below, Factor of safety=resisting…

Q: (Use The Figure (10.20) to find the solution of this question) Two embankments loads on silty clay…

A: Boussinesq published equations in 1885 that might be used to determine the state of stress in a…

Q: An embankment is being built of a soil whose unit weight is equal to 18 kN/m³. The pore pressure…

A: given values- Pore pressure parameters-A=0.6B=0.8change in height 6 m to 9 m

Q: The retaining wall is supporting two layers of soil with different properties as shown in the figure…

A: Active force

Q: Use The Figure (10.20) to find the solution of this question) An embankment load on a silty clay…

A: An embankment is there and it is fully silty clay is there we need to determine the stress increase…

Q: A soil profile consists of 6 m thick clay soil over 3 m thick sand soil, which in turn lies over a…

A: (a) Before the construction of the embankment; Calculate the total stress at clay ; Total…

Q: A trapezoidal channel with bottom width 3.5 m and side slopes 1H:1V on the left and 1.5H:1V on the…

Q: Figure below shows an excavation in sand, supported by braced sheet pile walls. The unit weight of…

Q: An embankment for road traffic is required to be constructed with the following dimensions : Top…

A: Solution: q= unit weight x depth=21x4 =84 kN/m2 Vertical stress= q x Iz z=6m a=8m b=20m with 1V:1.5H…

Q: The soil profile at a site consists of 2 m of clay (ybulk = 19.5 kN/m3; y sat = 20.93 kN/m3)…

A: To find the depth-

Q: A 3 m high embankment is to be constructed as shown in the figure. If the unit weight of soil used…

Q: PROBLEM 5. A 4-m high embankment is to be constructed as shown in the Fig. 3 below. If the unit…

A: Considering the following diagram: Calculate the following data:The length of top width of…

Q: A 3 m high embankment is to be constructed as shown in the figure. If the unit weight of soil used…

A: Given data A 3m high embankment unit weight of soil used in embankment = 19KN/m3 we have to…

Q: nd right embankments are 11 and 13 kN/m, respectively. Determine the stress increase Two embankments…

Q: An unsupported excavation is made to the maximum possible depth in a clay soil having Y₁ = 18 kN/m³,…

Q: An embankment consists of clay fill for which c=25 kPa and angle of internal friction is 260 9from…

A: Given:- C=25 kPaϕ=26oΥ=18.64 KN/m3Z=20 m To find:- Stress at a depth of 20 m Free body diagram

Q: Problem 1: A concrete dam retaining water is shown in the figure below. The head of water on the…

Q: Two embankments loads on silty clay soils layers as shown below. Unit weights of the left and right…

A: Boussinesq's Equation : Boussinesq published equations in 1885 that might be used to determine the…

Q: For the dam cross-section shown below, determine the minimum value of b such that the resultant…

A: dam : A dam is a structure that is built across a stream or river. Water collects at the back of the…

Question

Problem (4.9): An embankment of (3m) high is to be constructed as shown in the figure
below. If the unit weight of compacted soil is 19 kN/m³, calculate the vertical stress
due to the embankment loading at (A), (B), and (C) points.
6m
4.5m
+1.5m i1.5m +
1:1 slope
3m
1:1 slope
Y soil = 19 kN/m3
3m
В

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1: Finding the Stress at point A

VIEW

Step 2: Finding the Stress at point B

VIEW

Step 3: Finding the Stress at point C

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Lateral earth pressure distribution against retaining walls

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

It is required to design a cantilever retaining wall to retain a 5.0 m high sandy backfill. The dimensions of the cantilever wall are shown in Figure 15.52 along with the soil properties. Check the stability with respect to sliding and overturning, based on the active earth pressures determined, usinga. Coulomb's earth pressure theory (δ' = 24°), andb. Rankine's earth pressure theory.The unit weight of concrete is 24 .0 kN/m3
A 6m high vertical retaining wall is used to retain a soil of unit weight 18 kN/m3 and slope 20°. The soil is a cohesionless soil with internal friction angle of 40°. Compute the coefficient of active earth pressure from the given data.
An embankment consists of clay fill for which c=25 kPa and angle of internal friction is 260 9from consolidated undrained test with pore pressure measurement) The weight of fill per unit volume is 18.64 kN/m3. Compute the stress in kPa at depth of 20 m. Show free body diagram a.21.6 b.372.8 c.192.8 d.62.5
An embankment consists of clay fill for which c=25 kPa and angle of internal friction is 260 9from consolidated undrained test with pore pressure measurement) The weight of fill per unit volume is 18.64 kN/m3. Compute the stress in kPa at depth of 20 m. a. 192.8 b. 62.5 c. 21.6 d. 372.8
A braced cut is carried out to 10 m depth at a site where the soil consists of 4 m of sand ( = 17.0 kN/m3, = 33) at the top underlain by 6 m of clay ( = 18.5 kN/m3, c = 35 kN/m2). a. What would be the average value of cohesion and the unit weight for the equivalent homogeneous soil profile? b. Show the lateral earth pressure envelope you would use in determining the strut loads.
A masonry dam (sp.gr. = 2.4) of trapezoidal cross-section is 20 m high. It has a thickness of 2 m at the top and 14 m at the bottomas shown in the figure.Coef. of friction under the foundation is 0.80 and assuming there is hydrostatic upliftthat varies linearly from one-half the hydrostatic head at the upstream edgeof the dam to zero at the downstream edge.Determine
A concrete gravity dam with a trapezoidal section is holding water as shown in the figure. A distance of 15 meters from the toe, a drain is located. The drain has a pressure due to uplift of zero and increasing uniformly to full hydrostatic at the heel. Upstream face 1H:5V, while downstream face is inclined 1H:2V. Which of the ff nearly gives the maximum foundation pressure on the base of the dam in kilopascal ? Assume 23.54 kN/m3 for the unit weight of concrete. a. 3114 b. 1095 c. 4115 d. 964 e. 680
Consider the soil profile shown inFigure 1.4: How high should thegroundwater table rise/drop so thatthe effective stress at C is 130 kN/m2?
A retaining wall 6 m high supports cohesionless soil having a dry density of 1600 kg/m³, angle of resistance 32 and void ratio of 0.68. The surface of the soil is horizontal and level with the top of the wall. Neglecting wall friction and using Rankine’s formula for active pressure of a cohesionless soil. 1. Determine the nearest value of the total earth thrust on the wall in KN per lineal meter if the soil is dry. a. 73.1 b. 86.7 c. 62.4 d. 98.1 2. Find the nearest value of the thrust on the wall in KN per lineal meter if owing to inadequate drainage, it is waterlogged to a level of 3.5 m below the surface. a. 112 b. 171 c. 147 d. 153 3. Find at what height above the base of the wall the thrust acts during the waterlogged condition. a. 2.21 m b. 2.00 m c. 1.74 m d. 1.42 m
An embankment consists of clay fill for which c=25 kPa and angle of internal friction is 260 (from consolidated undrained test with pore pressure measurement) The weight of fill per unit volume is 18.64 kN/m3. Compute the effective stress in kPa at a depth of 20 m. If the pore pressure at this point is shown by a piezometer to be 180 kPa. a. 62.5 b. 372.8 c. 192.8 d. 21.6
The following is a sketch of the proposed embankment, calculate the addition of vertical stress (Bousinesq method / graph below) at the depths of points A and B. Assume the unit weight of the soil stockpile = 20 kN / m3.
A concrete dam is triangular in cross section and (30+0.314)m high from the horizontal base. If water reaches a depth of (27+0.314)m on the vertical face, what is the minimum length of the base of the dam such that the resultant will intersect the base within the middle third? What minimum coefficient of friction is required to prevent sliding ? Determine the pressure distribution along the base. If the uplift pressure varies from half full hydrostatic at the heel to zero at the toe.