Q: A 6-pole dc machine has 46 slots, 184 commutator segments, and 16 conductors per slot. It is wound in simple wave with 4 mm 2 copper wire. The armature length and diameter are 45 cm and 35 cm respectively. The armature produces an emf of 70O V when it rotates at 450 rpm.a. Find the number of coil sides per slot, the coil span, and the commutator pitch.c. finds the average air gap flux density.d. Find the average emf between adjacent .commutator segments

Q: A 6-pole dc machine has 46 slots, 184 commutator segments, and 16 conductors per slot. It is wound in simple wave with 4 mm 2 copper wire. The armature length and diameter are 45 cm and 35 cm respectively. The armature produces an emf of 70O V when it rotates at 450 rpm.a. Find the number of coil sides per slot, the coil span, and the commutator pitch.c. finds the average air gap flux density.d. Find the average emf between adjacent .commutator segments

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Q1) A 4-pole, separately excited, wave wound DC machine with 0.12 armature resistance is rated for 230 V and 5 kW at a speed of 1200 rpm. If the same armature coils are reconnected to forms a lap winding, what is the power (in kW) at 1200 rpm of the reconnected machine if the field circuit is left unchanged? Also calculate the voltage regulation in both cases
7- An 8-pole d.c. machine of 1200kW, 600V, 500 rpm and the average value of the reactance voltage per coil is 6.6V. the machine is lap connected of 648 conductor and each coil has two turns, the axial length of the compole 29 cm and the air gap is 0.8 cm, the armature diameter is 0.35m and the ratio (Bma/B,) = 1.5. Find the interpole m.m.f.
The armature of an 8 -pole dc machine has 72 slots, and its diameter is48 cm. Find the pole pitch in )a) electrical degrees, (b) electrical radians, and (c)number of slots. Also find
Q1) A 4-pole, separately excited, wave wound DC machine with 0.12 armature resistance is rated for 230 V and 5 kW at a speed of 1200 rpm. If the same armature coils are reconnected to forms a lap winding, what is the power (in kW) at 1200 rpm of the reconnected machine if the field circuit is left unchanged? Also voltage regulation in both cases
The armature of an 8 -pole dc machine has 72 slots, and its diameter is48 cm. Find the pole pitch in (a) the electrical angle corresponding to a mechanical angle of 350, (b) the mechanical angle corresponding to an electrical angle of 350, and (c) the distances along the armature surface corresponding to the angles in g and h
An 8 pole, lap-wound armature has 1200 conductors and a flux pole is 0.06wb. Determine the e.m.f generated when the dc machine running at 600 rev/min.
A 230 V dc machine has an emf constantand . The field is separatelyexcited and produces 0.01 Wb per pole. for all parts ofthe problem. (a) At what speed does the machine operate as adc generator with rated terminal voltage? (b) At what speeddoes the machine operate as a dc motor with rated terminalvoltage? (c) If an external resistance is added in serieswith the armature circuit, at what speed does the machineoperate as a dc motor with rated terminal voltage? (d) If themotor of part (b) is known to be supplying 10 HP to a coupledmechanical load, determine the rotational losses at the point ofoperation ***Any two branches please do not be late
A 4-pole dc motor is lap-wound with 480 conductors. The average flux density and the cross - sectional area over one-pole-pitch are 0.4 T and 16m2 respectively. Find the torque developed when the motor is drawing 30A and running at 1500 rpm.
- A separately excited 4 - pole, 900 rpm wave wound dc generator has an induced emf of 240V at rated speed and rated field current. When connected to a load, the terminal voltage is observed to be 200V. If the armature resistance is 0.2 Ω and the flux per pole is 10 m Wb, compute the armature current and the number of conductors
An 8-pole d.c. machine of 1200kW, 600V, 500 rpm and the average value of the reactance voltage per coil is 6.6V. the machine is lap connected of 648 conductor and each coil has two turns, the axial length of the compole 29 cm and the air gap is 0.8 cm, the armature diameter is 0.35m and the ratio (Bmax/Bav) = 1.5. Find the interpole m.m.f.
Q23) A shunt generator supplies a 20KW load at 200V through cables of resistance, R = 100mΩ. If the field winding resistance ,Rf=50Ω and the armature resistance, Ra=40mΩ, i) Estimate terminal voltage across the load. ii) Calculate the emf generated in the armature.
a dc shunt generator supplies a load of 10kW at 250V calculate the induced emf,if the armature resistance is o.5ohm and the shunt field resistance is 100ohm