Q/ Mohr's method uses the potassium chromate indicator and this indicator makes the equivalent point not identical to the end point. A sample weighing 5.592 g of BaCl2 is dissolved in 500 mL of water. Calculate the percentage of chloride in the sample when 25 mL of the sample is titrated and requires 33.47 mL of 0.1098 N AGNO,. SOLUTTION

Q/ Mohr's method uses the potassium chromate indicator and this indicator makes the equivalent point not identical to the end point. A sample weighing 5.592 g of BaCl2 is dissolved in 500 mL of water. Calculate the percentage of chloride in the sample when 25 mL of the sample is titrated and requires 33.47 mL of 0.1098 N AGNO,. SOLUTTION

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter20: Applications Of Oxidation/reduction Titrations

Section: Chapter Questions

Problem 20.24QAP

See similar textbooks

Similar questions

While working in a metal processing facility, Letlen had accidentally mixed two metal vatstogether creating an alloy. One vat was labeled for cadmium, while the other was not. It canbe assumed that these are of pure metal composition. To identify this metal, Letlen took 1.000 g of the homogenous alloy sample composed ofcadmium and the unknown metal, dissolved, and diluted it to exactly 100.0 mL in avolumetric flask. A 20.00-mL aliquot was taken and titrated this using 22.82 mL of 0.05000M EDTA. In a second 20.00-mL aliquot, the Cd was masked through the addition of HCN/NaCN buffer.The titration of the unknown metal in the aliquot required 15.13 mL of EDTA.MW: Cd (112.411 g/mol) a. Calculate the moles of Cd and the moles of unknown metal in the 20.00-mL aliquot.b. Calculate the moles of Cd and the moles of unknown metal in the sample.
A) Student used 21.03 mL of titrant to reach the endpoint of a titration of 0.1234g sample of Na2CO3. Calculate the ratio of the volume (mL) of titrant used to mass (g) of sample. B) Using the ratio calculated above, calculate the mass of sample necessary to consume exactly 25.00mL of titrant.
calculate the mass of Sn when 50 mL of a sample containing Sn2+ is titrated with 42.00 mL of 0.0150M MnO4- to reach endpoint
Using basic conditions, MnO4- can be used as titrant for the analysis of Mn2+, with both the analyte and the titrant ending up as MnO2. In the analysis of a mineral sample for manganese, a 0.5165-g sample is dissolved, and the manganese is reduced to Mn2+. The solution is made basic and titrated with 0.03358 M KMnO4, requiring 34.88 mL to reach the endpoint. Calculate the %w/w Mn in the mineral sample. Answer: % Mn =
The level of dissolved oxygen in a water sample can be determined by the Winkler method. In a typical analysis, a 100.0-mL sample is made basic, and treated with a solution of MnSO4, resulting in the formation of MnO2. An excess of KI is added, and the solution is acidified, resulting in the formation of Mn2+ and I2. The liberated I2 is titrated with a solution of 0.00870 M Na2S2O3, requiring 8.90 mL to reach the starch indicator end point. Calculate the concentration of dissolved oxygen as parts per million of O2.
A 370.00 mL solution of 0.00185 M A3B4 is added to a 390.00 mL solution of 0.00100 M C3D4. What is pQsp for A3D4?
A solid sample containing some Fe2+ion had a total mass of .9791 g. It required 18.2 ml of 0.02304 M KMnO4 to titrate the Fe2+ in the dissolved sample to a pink endpoint. How many moles of Fe2+ were in the the sample? How many grams of irion were present in the sample and what was the mass percent iron in the sample?
The protein content of wheat flour can be determined reasonably accurately by multiplying the percentage of nitrogen present by 5.7. A 2.06-g sample of flour was taken through a Kjeldahl procedure and the ammonia produced was distilled into a boric acid solution. If this solution required 34.70 mL of 0.174 N HCl for titration to the methyl red end point, what is the a) % Nitrogen and b) % protein in the flour? (Use 1:1 stoich ratio between N and HCl)
0.9563 g KHCO3 (M.r.(KHCO3) = 100.12 g/mol (mg/mmol)) have measured, and 50.0 cm3 stock solution have been prepared from it. 10.00 cm3 individual samples from it was titrated with HCl titrant in order to determine its concentration. The average HCl consumption was 19.18 cm3. The same HCl solution with were used to determine the concentration of NaOH titrant. The base consumption for 20.00 cm3 HCl was 21.35 cm3 NaOH. 1. concentration of HCl 2. concentration of NaOH
A stock standard concentration of 101.25ppm was prepared of Cu. What are the actual concentrations of the working standards prepared in 100mL volumetric flasks, using 1mL, 5mL, 8mL, and 10mL volumes of the stock standard?
I would really appreciate some help in confirming a value computed in a prelab problem to be used in a lab for analytical chemistry! We're working on redox reactions and are looking at the reaction: Fe2+ + K2Cr2O7 + H+ = Fe3+ + K+ + Cr3+ + H2O The final questions asks, "calculate the amount of unknown sample needed to achieve about a 25.00 mL titration volume of 0.01600 M K2Cr2O7 if the %Fe of the unknown is approximately 8%. Make sure to use the coefficients from the balanced reaction" I have found the balanced equation; however, I was hoping to be able to confirm my values! Thank you in advance!
It is required to know the concentration of an aqueous solution of H2SO4 that appeared in the laboratoryChemistry III and it's unlabeled. To this end, a student of analytical chemistry carried out the followingProcedure: He took 5.00 mL of a fresh and standardized solution of 0.525M NaOH and brought them to a250.0 mL balloon to be completed with distilled water. Subsequently, he poured 15.00 mL of the solutionH2SO4 of unknown concentration in an Erlenmeyer flask and added 2 drops of phenolphthalein.Using a burette filled with the last NaOH solution, he noticed that when adding 39.40 mL of the hydroxidethe Erlenmeyer solution reached a faint but permanent pink. With the above dataDetermine the concentration and pH of the H2SO4 solution.