Q.3 A shaft carries five masses (A,X,B,C,Y) B.The masses for X,B and C 80 kg, 100 kg and 110 kg respectively and revolving at radius 80 mm, 70 mm and 60 mm in planes measured from X to B is 400 mm, and X to C is 600 mm. The angles are X, B and C 30°, 60° and 200° respectively. The balancing masses are to be placed in planes A and Y. The distance between the planes A and X is 100 mm, between X and Y is 800 mm If the balancing masses revolve at a radius of 100 mm.1.Draw the (a) Position of planes of the masses. (b) Angular position of the masses.2.Find their magnitudes and angular positions. A H X B с Y

Q.3 A shaft carries five masses (A,X,B,C,Y) B.The masses for X,B and C 80 kg, 100 kg and 110 kg respectively and revolving at radius 80 mm, 70 mm and 60 mm in planes measured from X to B is 400 mm, and X to C is 600 mm. The angles are X, B and C 30°, 60° and 200° respectively. The balancing masses are to be placed in planes A and Y. The distance between the planes A and X is 100 mm, between X and Y is 800 mm If the balancing masses revolve at a radius of 100 mm.1.Draw the (a) Position of planes of the masses. (b) Angular position of the masses.2.Find their magnitudes and angular positions. A H X B с Y

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A shaft caries four rotating masses A, B, C and D which are completely balanced. The masses B, C and Dare 50kg, 80kg and 70kg respectively. The masses C and D make angles of 90° and 195° respectively with mass B in the same sense. The masses A, B, C and D are concentrated at radius 75mm,100mm,50mm and 90mmrespectively.The plane of rotation of masses B and C are 250mm apart. Determine the magnitude of mass A and its angular position the position of planes A and D.
A uniform rod of mass M = 2.3 kg and length L = 0.2 m, lying on a frictionless horizontal plane, is free to pivot about a vertical axis through one end, as shown. The moment of inertia of the rod about this axis is given by 1/3 ML2. If a force F = 7 N, q = 47° acts as shown, what is the resulting angular acceleration (in rad/s2) about the pivot point?
3kg ball connected to horizontal AB with cable. AB rotates with constant angular velocity w about vertical axis. if angle of cable with vertical is theta= 30 degree, find angular velocity and tension of the cable.
Q4:-A rotating shaft carries four masses 176.6 N, 137.3 N, 157 N and 117 N at radii 5 cm, 6 cm, 7 cm and 6 cm respectively. The second, third and fourth masses revolve in planes 8 cm, 16 cm and 28 cm respectively measured from the plane of the first mass (at the left end). They are angularly located at 60o, 135oand 270orespectively measured clockwise from the first mass (at the positive x-axis). The shaft is dynamically balanced by two masses both located at 5 cm radii and revolving in planes midway between those of 1st and 2nd masses and midway between those of 3rd and 4th masses. Determine the magnitude of the masses and their respective angular positions.
A shaft and its associated rotating parts has a moment of inertia of 50 kg m2. The angular acceleration of the shaft to produce an accelerating torque of 5 kN m is:
A single cylinder horizontal engine runs at 120 r.p.m. The length of stroke is 400 mm. The mass ofthe revolving parts assumed concentrated at the crank pin is 100 kg and mass of the reciprocatingparts is 150 kg. Determine the magnitude of the balancing mass required to be placed opposite tothe crank at a radius of 150mm which is equivalent to all the revolving and 2/3rd of the reciprocating masses. If the crank turns 30° from the inner dead centre, find the magnitude of the unbalancedforce due to the balancing mass solve graphically
A shaft carries four masses, B, C, and D of magnitude 200 kg, 300 kg, 400 kg, and 200 kg respectively and revolving at radii 80 mm, 70 mm, 60 mm, and 80 mm in planes measured from A at 300 mm, 400 mm and 700 mm. The angles between the cranks measured anticlockwise are A to B 45º, B to C 70º, and C to D 120º. the balancing masses are to be placed in planes X and Y. The distance between the planes A and X is 100 mm, between X and Y is 400 mm and between Y and D is 200 mm. If the balancing masses revolve at a radius of 100 mm, find their magnitude and angular positions.
Q4:-A rotating shaft carries four masses 176.6 N, 137.3 N, 157 N and 117 N at radii 5 cm, 6 cm, 7 cm and 6 cm respectively. The second, third and fourth masses revolve in planes 8 cm, 16 cm and 28 cm respectively measured from the plane of the first mass (at the left end). They are angularly located at 60°, 135° and 270° respectively measured clockwise from the first mass (at the positive x-axis). The shaft is dynamically balanced by two masses both located at 5 cm radii and revolving in planes midway between those of 1st and 2nd masses and midway between those of 3rd and 4th masses. Determine the magnitude of the masses and their respective angular positions.
A single cylinder horizontal engine runs at 120 r.p.m. The length of stroke is 400 mm. The mass of the revolving parts assumed concentrated at the crank pin is 100 kg and mass of the reciprocating parts is 150 kg. Determine the magnitude of the balancing mass required to be placed opposite to the crank at a radius of 150mm which is equivalent to all the revolving and 2/3rd of the reciprocat- ing masses. If the crank turns 30° from the inner dead centre, find the magnitude of the unbalanced force due to the balancing mass.
A beam, uniform in mass, M = 47.6 kg and length L = 10.2 m, hangs by a cable supported at point B, and rotates without friction around point A. On the end far of the beam, an object of mass m = 24.3 kg is hanging. The beam is making an angle of θ = 30.9° at point A with respect to the + x-axis. The cable makes an angle φ = 21.1° with respect to the - x-axis at B. Assume ψ = θ + φ. a. Enter an expression for the lever arm for the weight of the beam, lB, about the point A. b. Find an expression for the lever arm for the weight of the mass, lm. c. Write an expression for the magnitude of the torque about point A created by the tension T. Give your answer in terms of the tension T and the other given parameters and trigonometric functions. d. Enter an expression the horizontal component of the force, Sx, that the wall exerts on the beam at point A in terms of the tension T, given parameters, and variables available in the palette. e. Enter an expression for the vertical component of…
e g O single cylinder reciprocating engine has speed 240 rp.m., stroke 3 mm, mass of reciprocating parts 50 kg, mass of revolving parts at 150 mm radius 37 kg, I MUO third of the reciprocating parts and all the revolving parts are to be balanced, find : 1. The bala,:A mass required at a radius of 400 mm, and 2. The residual unbalanced force when the crapg h; rotated 60° from inner dead centre. T e T g LSOt ULy A PO Eangt
B 2 ~s A single cylinder reciprocating engine has speed 240 rp.m., stroke 3 mm, mass of re ocating parts 50 kg, mass of revolving parts at 150 mm radius 37 kg. UMOO third of the reciprocating parts and all the revolving parts are to be balanced, find : 1. The bala,;: mass required at a radius of 400 mm, and 2. The residual unbalanced force when the crank g rotated 60° from inner dead centre. P e AN R eR e e g