Q1-The aluminum rod ABC (E = 70 GPa), which consists of twocylindrical portions AB and BC, is to be replaced with a cylindrical steel rodDE (E - 200 GPA) of the same overall lengtth. Deternine the minimum re-quired dìameter d of the ateel rod if its vertical deformation s not to exceedthe deformation of the aluminum rod under the same load and if the allowablestross in the steel rod is not to excced 165 MPa.

Answered: Image /qna-images/answer/d269b033-7c93-4305-829b-0149505665f0.jpg

Q1- The aluminum rod ABC (g = 70 GP«), which consists of two cylindrical portions AB and BC, is to be replaced with a cylindrical steel rod DE (E- 200 GPA) of the same overall lengtth. Determine the minimum re- quired diameter d of the steel rod if its vertioal deformation is not to exceed the deformation of the aluminum rod under the same load and if the allówable stross in the steel rod is not to excced 165 MPa.

Q1- The aluminum rod ABC (g = 70 GP«), which consists of two cylindrical portions AB and BC, is to be replaced with a cylindrical steel rod DE (E- 200 GPA) of the same overall lengtth. Determine the minimum re- quired diameter d of the steel rod if its vertioal deformation is not to exceed the deformation of the aluminum rod under the same load and if the allówable stross in the steel rod is not to excced 165 MPa.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Rod BD is made of steel (E = 29 × 106 psi) and is used to brace the axially compressed member ABC. The maximum force that can be developed in member BD is 0.02P. If the stress must not exceed 18 ksi and the maximum change in length of BD must not exceed 0.001 times the length of ABC, determine the smallest-diameter rod that can be used for member BD. Take P = 148 kips.The smallest-diameter rod that can be used for member BD is in.
A copper wire 2.0 m long, hanging vertically, supports a load of 6.0 kN.Neglecting the weight of the wire, determine the required diameter ifthe stress is not to exceed 300 MPa and the total elongation is not toexceed 5.0 mm. Assume E = 125 GPa.Answer: d = ___________________
The pin-connectsed structure consists of a rigid bar ABCD and two bronze alloy [E = 100 GPa] bares, each with a cross-sectional area of 340 mm2. bar (1) has a length L1 = 810 mm and bar (2) has a lenght L2 = 1080 mm. Assume dimensions of a = 480mm, b = 38mm, and c = 600mm. If the allowable normal stress in bars (1) and (2) must be limmited to 165 MPa each, determine: a) the maximum load P that may be applied at D to the rigid bar. b) The deflection at D for the load determined in part (a).
The rigid bar of negligible mass, pinned at one end, is supported by a steel rod and aluminum rod asshown. What maximum load P can be applied without exceeding stress in the steel of 130MN/m2or in the aluminum of 90MN/m2
The horizontal bar shown is pinned at O and is supported with a helical springat L1 from O. L1=2m, L2=1m. The spring has 30 turns and the diameter of the wire usedis 20mm. The diameter of the spring is 125mm. Modulus of Rigidity = 83GPa. Determine the deformation of the spring.
The rigid beam is supported by the three suspender bars. Bars AB and EF are made of aluminum and bar CD is made of steel. If each bar has a cross-sectional area of 450 mm2, determine the maximum value of P if the allowable stress is (sallow)st = 200 MPa for the steel and (sallow)al = 150 MPa for the aluminum. Est = 200 GPa, Eal = 70 GPa.
The horizontal bar shown is pinned at O and is supported with a helical springat L1 from O. L1=2m, L2=1m. The spring has 30 turns and the diameter of the wire usedis 20mm. The diameter of the spring is 125mm. Modulus of Rigidity = 83GPa. Determine the shear stress of the helical spring loaded as shown if w = 25kN/m.
Rigid triangle ABC is pinned at B and supported by a steel-reinforced aluminum shaft at A and an aluminum-copper at C. The steel-reinforced aluminum shaft is fixed at F while the aluminum-copper rod is fixed at E. Determine the maximum weight of triangle ABC if the allowable stress for steel, copper, and aluminum are 36 ksi, 11.4 ksi, and 60 ksi, respectively, and the allowable deformation for the aluminum-copper rod CDE is 0.1 in.
Three steel rods (E5 29 3 106 psi) support an 8.5-kip load P. Each of the rods AB and CD has a 0.32-in2 cross-sectional area and rod EF has a 1-in2 cross-sectional area. Neglecting the deformation of bar BED, determine (a) the change in length of rod EF, (b) the stress in each rod.
Three steel rods (E = 200 GPa) supports a 50 kNload P. Each of the rods AB and CD has a 300 mm2cross-sectional area and rod EF has a 600 mm2cross-sectional area.(a) State whether the structure isstatically determinate or indeterminate.Why?(b)Determine the force and thestress in each rod.(c) Determine the deformation of each rod.Note: The link BED is rigid, and BE = ED.
Two solid cylindrical rods (1) and (2) are joined together at flange B and loaded, as shown. If the normal stress in each rod must be limited to 107 MPa, determine the minimum diameter required for rod 1. Assume P = 80 kN and Q = 140 kN. Express your answer in mm rounded to the nearest hundredths.
The brass tube AB (E = 105 GPa) has a cross-sectional areaof 138 mm² and is fitted with a plug at A. The tube is attached atB to a rigid plate that is itself attached at C to the bottom of analuminum cylinder (E = 70 GPa) with a cross-sectional areaof 250 mm². The cylinder is then hung from a support at D. In orderto close the cylinder, the plug must move down through 1.2 mm. Determine the force P that must be applied to the cylinder.