Q/2 A cylindrical metal pressure vessel 400 mm, 15 mm in diameter and thickness respectively. There is an internal pressure of 8 MN/m2. (a) Determine the longitudinal and tangential stresses in the metal. (b) To what value can the internal pressure be increased when the stress in the metal is limited to 160 MN/m2?

Q/2 A cylindrical metal pressure vessel 400 mm, 15 mm in diameter and thickness respectively. There is an internal pressure of 8 MN/m2. (a) Determine the longitudinal and tangential stresses in the metal. (b) To what value can the internal pressure be increased when the stress in the metal is limited to 160 MN/m2?

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.2.13P: : A hollow, pressurized sphere having a radius r = 4.8 in, and wall thickness t = 0.4 in. is lowered...

See similar textbooks

Similar questions

A thin-walled hollow sphere 3.8 m in diameter holds helium gas at 1767 kPa. Determine the minimum wall thickness of the sphere in mm if its allowable stress is 84.8 MPa.
A cylindrical steel tank having an internal diameter of 50 in. is submerged in seawater (weight density =64⁢ lb/ft3) to a depth of 9750 ft. The internal gage pressure in the tank is 1600 psi. (a) If the allowable stress of the steel is 32 ksi, what is the minimum allowable outside diameter of the tank? (b) What is the maximum tensile stress before the tank is immersed? Determine the external pressure of the seawater at a depth of 9750 ft. po= psi Determine the maximum magnitude of σr produced in the tank. σr = psi Based on the maximum magnitude of σr produced in the tank from Part 2, is there an outside diameter for which the radial stress magnitude will exceed the allowable stress of the steel in this case? More calculations are needed. No Yes For this case, choose the correct statement regarding the maximum magnitude circumferential normal stress. It occurs at the outer surface of the tank, and it is tensile. It occurs at the outer surface of the tank, and it…
A wood stave pipe, 120 cm in inside diameter, is to resist a maximum water pressure of 1,200 kPa. If the staves are bound by steel flatbands (10 cm by 2.50 cm), find the spacing of the bands if its allowable stress is 105 MPa
The pressure tank shown is fabricated from 1/8-in steelplate. Calculate the allowable internal pressure if thecircumferential and longitudinal stresses are limited to20 ksi and 10 ksi, respectively.Answer: p= ___________________
The tank shown in the figure is fabricated from 10 mm steel plate. Determine themaximum longitudinal and circumferential stress caused by an internal pressure of 1.2MPa.
The tank shown in the figure is fabricated from 10 mm steel plate. determine the maximum longitudinal and circumferential stress caused by an internal pressure of 1.2 mpa
The manhole cover of an ammonia storage tank is to be held by 25 stud bolts. If the pressure inside the storage tank will remain constant at 12.5 kg/cm2 and the manhole diameter is 508 mm, what should be the stress area of the carbon steel bolts?
A thin cylindrical pressure vessel of 1.2 m diameter generates steam at a pressure of 1.75 N/mm2. Find the minimum wall thickness, if (a) the longitudinal stress does not exceed 28 MPa; and (b) the circumferential stress does not exceed 42 MPa
A water tank in the figure shown is made from steel plates that are 1/2 in. thick. Find the height to which the tank maybe filled if the longitudinal stress equal to 55 psi is to be used. The specific weight of water is 62.4 lb/〖ft〗^3.
The cylindrical steel tank shown is 3.5m in diameter 5m high and filled with brine solution. Brine has a density of 1198kg/m3. The thickness of the steel shell is 12.5mm. Calculate the tangential stress and the longitudinal stress in the tank, MPa
The wall thickness of a 1.2 m diameter spherical tank is 1.6875 mm. Calculate the allowable internal pressure if the stress is limited to 55 MPa. If i will get the same answer again I will report and downvote.
A wood stave pipe, 120 cm in inside diameter, is to resist a maximum water pressure of 1,200 kPa. If the staves are bound by steel flat bands (10 cm by 2.50 cm), find the spacing of the bands if its allowable stress is 105 MPa.\ Please explain the steps and formulas used.