SITUATION C. A closed vertical cylindrical vessel, 1.75 m in diameter and 3.5 m high is 75% full of oil (SG=0.8) and is revolved about its vertical axis with a constant angular speed. The vessel is made up of steel 9mm thick with an allowable tensile stress of 85 MPa and has a small opening at the center of the top of the cover. 8. What is the maximum angular speed that the vessel can be revolved?

SITUATION C. A closed vertical cylindrical vessel, 1.75 m in diameter and 3.5 m high is 75% full of oil (SG=0.8) and is revolved about its vertical axis with a constant angular speed. The vessel is made up of steel 9mm thick with an allowable tensile stress of 85 MPa and has a small opening at the center of the top of the cover. 8. What is the maximum angular speed that the vessel can be revolved?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A cylindrical steel tank having an internal diameter of 50 in. is submerged in seawater (weight density =64⁢ lb/ft3) to a depth of 9750 ft. The internal gage pressure in the tank is 1600 psi. (a) If the allowable stress of the steel is 32 ksi, what is the minimum allowable outside diameter of the tank? (b) What is the maximum tensile stress before the tank is immersed? Determine the external pressure of the seawater at a depth of 9750 ft. po= psi Determine the maximum magnitude of σr produced in the tank. σr = psi Based on the maximum magnitude of σr produced in the tank from Part 2, is there an outside diameter for which the radial stress magnitude will exceed the allowable stress of the steel in this case? More calculations are needed. No Yes For this case, choose the correct statement regarding the maximum magnitude circumferential normal stress. It occurs at the outer surface of the tank, and it is tensile. It occurs at the outer surface of the tank, and it…
5.) A lO-kN car and 5-kN hoist are supported 1.8 m above the floor by a cylinder with a 300-mm bore . What pressure will this develop in the system?
Subject is hydraulics A closedcylindrical vessel 5 ft in diameter and 6 ft high is 3/4 filled with molasses(SG = 1.24) and rotated about its vertical axis. Air is pressurized at 14.5psi. a. If w = 50 rpm, solve for thepressure at the base at the circumference of the vessel b. If w = 75 rpm, solve for thepressure at the base at the circumference of the vessel c. Solve for w (in rpm) so that thereis no water at the base of the vessel within 1.8 ft radius
A thin metal pipe of mean radius R, thickness t and length L, has its ends closed and is full of water. If the ends are simply-supported, estimate the form of the distribution of shearing stresses over a section near one support, ignoring the intrinsic weight of the pipe. Answer: t = 2450 (RL/t) Show your solution
A cylindrical tank having a pressure of 114.0 kPa is used to carry a 3.5 m3of water has a height of 2.0 m and thickness of 5.0 mm. Determine the following What is the diameter of the tank The tangential and longitudinal stress in the tank
4. What is the relationship between the height of column of fluid and its exit velocity? What appropriate equation can be used to express this relationship? 5. Give at least three examples or situations where understanding of hydrostatics is important
Calculate the minimum thickness of the vessel if the allowable tangential stress is 200 MPa. The diameter of the vessel is 1500 mm and the pressure inside the vessel is 10 MPa.
The wall thickness of the spherical tank is 8mm, calculate the diameter if the allowable stress is 140 MPa and the internal pressure is 60MPa.
A vertical cylinder gasoline storage tank is 30m in diameter and is filled to a depth of 15m with gasoline of mass density 740 kg/m³. if the shell plating has an allowable stress of 100 MPa, calculate the required wall thickness at the bottom of the tank.
15- What will be the diameter (in mm) of a water droplet, the pressure inside which is 0.00221 N/cm2 greater than the outside pressure? (Take surface tension as 0.075 N/m)
A cylindrical tank with closed ends is filled with compressed air at a pressure of 500 kPa. The inner radius of the tank is 2 m and it has wall thickness of 10 mm. The magnitude of maximum in-plane shear stress (in MPa) is_______.
Calculate the tangential stress at a point on the plate that forms a cylindrical reservoir, known as the stresses shown in the Figure.