Q2: Consider a steam power plant operating on the ideal regenerative Rankine cycle with one open feedwater heater. Steam enters the turbine at MPa and 600°C and is condensed in the condenser at a pressure of 10 kPa. Some steam leaves the turbine at a pressure of 1.2 MPa and enters the open Teedwater heater. Determine the fraction of steam extracted from the turbine and the thermal efficiency of the cycle.

Q2: Consider a steam power plant operating on the ideal regenerative Rankine cycle with one open feedwater heater. Steam enters the turbine at MPa and 600°C and is condensed in the condenser at a pressure of 10 kPa. Some steam leaves the turbine at a pressure of 1.2 MPa and enters the open Teedwater heater. Determine the fraction of steam extracted from the turbine and the thermal efficiency of the cycle.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Consider a steam power plant operating on the ideal regenerative Rankine cycle with one open feedwater heater. Steam enters the turbine at 14 MPa and 600 degree celsius and is condensed in the condenser at a pressure of 15kPa. Some steam leaves the turbine at a pressure of 1.5 MPa andenters the open feedwater heater. For every kg of steam, determine the following: (a) thefraction of steam extracted from the turbine, (b) the turbine work (c) Pump work, (d) Heatadded, (e) Heat rejected, and (f) the thermal efficiency of the cycle.
In an ideal Reheat cycle , the steam throttled condition is 7 Mpa and 460 C. The steam is then reheated to 1.5 MpA and 460 C . If turbine exhaust is 50 C ,determine the following: A.) Quality after turbine expansion B.) Turbine work C.) Heat added in the boiler D.) Heat rejected from the condenser E.) Pump work F.) Net work G.) Cycle efficiency
Consider a steam power plant operating on the simple ideal Rankine cycle. Steam enters the turbine at 3 MPa and 350°C and is condensed in the condenser at a pressure of 75 kPa. Determine the thermal efficiency of this cycle
A steam power plant operates on the ideal reheat Rankine cycle. Steam enters the high-pressure turbine at 6 MPa and 400C and leaves at 2 MPa. Steam is then reheated at constant pressure to 400C before it expands to 20 kPa in the low-pressure turbine. Determine the turbine work output, in kJ/kg, and the thermal efficiency of the cycle. Also, show the cycle on a T-s diagram with respect to saturation lines.
Consider a 210-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters the turbine at 10 MPa and 500C and is cooled in the condenser at a pressure of 10 kPa. Assuming an isentropic efficiency of 85 percent for both the turbine and the pump, determine: the quality of the steam at the turbine exit the thermal efficiency of the cycle specific enthalpy (kJ/kg) at the condenser both inlet and outlet specific enthalpy (kJ/kg) at the boiler both inlet and outlet WT, WP, WNet(kJ/kg) actual Qin (kJ/kg) and actual Qout (kJ/kg).
Consider a regenerative vapor power cycle with two feedwater heaters, a closed one and an open one, and reheat. Steam enters the first turbine stage at 12 MPa, 560°C, and expands to 2 MPa. Some steam is extracted at 2 MPa and fed to the closed feedwater heater. The remainder is reheated at 2 MPa to 520°C and then expands through the second-stage turbine to 0.3 MPa, where an additional amount is extracted and fed into the open feedwater heater operating at 0.3 MPa.The steam expanding through the third-stage turbine exits at the condenser pressure of 60 kPa. Feedwater leaves the closed heater at 210°C, 12 MPa, and condensate exiting as saturated liquid at 2 MPa is trapped into the open feedwater heater. Saturated liquid at 0.3 MPa leaves the open feedwater heater. Each turbine stage and the pumps have an isentropic efficiency of 80%.Determine for the cycle:(a) the heat transfer to the working fluid passing through the steam generator, in kJ per kg of steam entering the first-stage…
A turbine with one extraction for regenerative feedwater heating, receives steam with an enthalpy of 3373 kJ/kg and discharges it with an exhaust enthalpy of 2326 kJ/kg. The ideal regenerative cycle feedwater heater receives 11338 kg/h of extracted steam at 345 kPa (whose h = 2745 kJ/kg). The feedwater (condensate from the condenser) enters the heater with an enthalpy of 140 kJ/kg and departs saturated at 345 kPa (hf = 582 kJ/kg). Calculate the turbine output in kW
Consider a power plant that operates on a simple ideal Rankine cycle with refrigerant- 134a (a pure substance) as the working fluid; not water! The refrigerant enters the turbine as a saturated vapour at 1.4 MPa and leaves at 0.7 MPa. The mass flow rate of the refrigerant is 3 kg/s. [Hint: Use Property Tables for R-134a.] (a) Draw this simple ideal Rankine cycle on T-s diagrams. Determine: (b) the thermal efficiency of the cycle and (c) the power output of this plant.
A gas-turbine power plant operates on the simple Brayton cycle between the pressure limits of 100 and 1600 kPa. The working fluid is air, which enters the compressor at 40C at a rate of 850 m3/min and leaves the turbine at 650C. Using variable specific heats for air and assuming a compressor isentropic efficiency of 85 percent and a turbine isentropic efficiency of 88 percent, determine (a) the net power output, (b) the back work ratio, and (c) the thermal efficiency.
Consider a steam power plant operating on the simple ideal Rankine cycle. The steam enters the turbine at 4 MPa, 400 degrees celcius and is condensed in the condenser at a pressure of 100 kPa. Draw the schematic and T-s diagram of the cycle and determine the following per unit mass of steam. (a) Turbine work (b) Pump work (c) Heat added in the boiler (d) Heat rejected in the condenser (e) Thermal efficiency of the cycle (f) Heat rate (g) Steam rate of the cycle
A steam power plant has high and low pressures of 20 MPa and 10 kPa., and one open feedwater heater operating at 1 MPa with the exit as a saturated liquid. The maximum temperature is 800C, and the turbine has a total power output of 25 MW. Conduct a thermodynamic analysis of the plant and answer the following questions. For the ideal cycle, what is: The heat rejected in the condenser in kJ/kg? The net Work in kJ/kg? The heat added in the steam generator in kJ/kg?
Consider a 210-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters the turbine at 10 MPa and 500C and is cooled in the condenser at a pressure of 10 kPa. Assuming an isentropic efficiency of 85 percent for both the turbine and the pump, determine the actual Wp (kJ/kg). (Use 2 decimal places for the final answer.)