Qs: A piston-cylinder device contains 6 kg of H2 and 21 kg of N2 at 160 K and 5 MPa. Heat is now transferred to the device, and the mixture expands at constant pressure until the temperature rises to 200 K. Determine the heat transfer during this process by treating the mixture as an ideal gas. 6 kg H2 21 kg N2 160 K 5 MPa Heat

Qs: A piston-cylinder device contains 6 kg of H2 and 21 kg of N2 at 160 K and 5 MPa. Heat is now transferred to the device, and the mixture expands at constant pressure until the temperature rises to 200 K. Determine the heat transfer during this process by treating the mixture as an ideal gas. 6 kg H2 21 kg N2 160 K 5 MPa Heat

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 4.625-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°C. Determine the heat added in kJ. (PLEASE DO NOT ROUND OFF INTERMEDIATE ANSWERS, ONLY THE FINAL ANSWER IN THREE DECIMAL PLACES)
A mixture of ideal gases has a specific heat ratio of k = 1.35 and an apparent molecular weight of M = 44 kg/kmol. Determine the work, in kJ/kg, required to compress this mixture isentropically in a closed system from 100 kPa and 35°C to 700 kPa. The universal gas constant is Ru = 8.314 kJ/kmol·K. The work required to compress this mixture is _______kJ/kg.
a. 9.23 kg of water vapor is contained at 150 kPa and 90 percent quality in a suitable enclosure. Calculate the heat in kJ which must be added to produce a saturated vapor.b. 9.96 kg of water vapor are contained at 150 kPa and 90 percent quality in a suitable enclosure. What will the pressure be in MPa at the end of the heating process?Please include the h-s and T-s diagram in the solution, and do not round off intermediate answers only the final answer in three decimal places.
A 3.586-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°C. Determine the heat added in kj. For the steam table, please refer to the green book entitled " Thermodynamic Properties of Water Including Vapor, Liquid, and Solid Phases"
A 240-m3 rigid tank is filled with a saturated liquid– vapor mixture of water at 200 kPa. If 25 percent of the mass is liquid and 75 percent of the mass is vapor, the total mass in the tank is (a) 240 kg (b) 265 kg (c) 307 kg (d) 361 kg (e) 450 kg
An ideal gas mixture that contains (% volume) 21% Hydrogen, 34% Octane, 5% Oxygen and 40% methane undergo a certain process inside a closed rigid container increasing the temperature by 150 degrees F. Let the specific heat ratio for the mixture be 1.27, determine the change in specific enthalpy (Btu/lb-R).
A two-phase, liquid–vapor mixture of H2O, initially at x=30% and a pressure of 100 kPa, is contained in a piston–cylinder assembly. The mass of the piston is 10 kg, and its diameter is 15 cm. The pressure of the surroundings is 100 kPa. As the water is heated, the pressure inside the cylinder remains constant until the piston hits the stops. Heat transfer to the water continues at constant volume until the pressure is 150 kPa. Friction between the piston and the cylinder wall and kinetic and potential energy effects are negligible. For the overall process of the water, determine the work and heat transfer, each in kJ.
A 2.170-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°C. Determine the heat added in kJ. Use steam tables of Keenan et al
An insulated rigid tank is divided into two compartments by a partition. One compartment contains 7 kg of oxygen gas at 40°C and 100kPa, and the other compartment contains 4 kg of nitrogen gas at 20°C and 150kPa. Now the partition is removed, and the two gases are allowed to mix. Determine:- (a) the mixture temperature and (b) the mixture pressure after equilibrium. CvN2=0.743 kJ/kg K and CvO2 = 0.658 kJ/kg K .
A stream of outdoor air is mixed with a stream of return air in an air-conditioning system that operated at 101.325 kPa barometric pressure. The flow rate of outdoor air is 2.0 kg/s, and its condition is 35℃ DB and 25℃ WB temperatures. The flow rate of return air is 3.0 kg/s, and its condition is 24℃ DB and 50% RH. If the ambient pressure is 98 kPaa, determine the following: a. The enthalpy of the mixture in kJ/kg dry-air b. The humidity ratio of the mixture in kg/kg dry-air c. The dry-bulb temperature of the mixture in ℃.
A rigid tank contains a gas mixture with a specific heat of cv = 0.748 kJ/kg·K. The mixture is cooled from 200 kPa and 200°C until its pressure is 100 kPa. Determine the heat transfer during this process, in kJ/kg.
Air initially at 101.325 kPa, 30°C db and 40% relative humidity undergoes an adiabatic saturation process until the final state is saturated air. If the mass flow rate of moist air is 60 kg/s, what is the increase in the water content of the moist air? Express your answer in kg/s.