Both parts Question 2:2.1) A wheel with a mass and radius of gyration of 1.387 kg and 183 mm rolls down an inclineas shown in Figure Q2. Determine angular acceleration as it rolls down the 12° incline.381 mmGOFigure Q2: A wheel rolling down the incline2.2) If the coefficient of statie and kinetic frietion between the wheel and the surface are u,= 0.3and Hg = 0.25 determine the maximum the angle (0) of the inclined plane so that the wheelrolls without slipping.

Mass= M= 1.387 kg Radius of wheel= R= 381 mm= 0.381 m Radius of gyration= K= 183 mm= 0.183 m Angle…

Question 2: 2.1) A wheel with a mass and radius of gyration of 1.387 kg and 183 mm rolls down an incline as shown in Figure Q2. Determine angular acceleration as it rolls down the 12° incline. 381 mm Figure Q2: A wheel rolling down the incline 2.2) If the coefficient of static and kinetic friction between the wheel and the surface are µ̟= 0.3 and Hg = 0.25 determine the maximum the angle (8) of the inclined plane so that the wheel rolls without slipping.

Question 2: 2.1) A wheel with a mass and radius of gyration of 1.387 kg and 183 mm rolls down an incline as shown in Figure Q2. Determine angular acceleration as it rolls down the 12° incline. 381 mm Figure Q2: A wheel rolling down the incline 2.2) If the coefficient of static and kinetic friction between the wheel and the surface are µ̟= 0.3 and Hg = 0.25 determine the maximum the angle (8) of the inclined plane so that the wheel rolls without slipping.

College Physics

1st Edition

ISBN:9781938168000

Author:Paul Peter Urone, Roger Hinrichs

Publisher:Paul Peter Urone, Roger Hinrichs

Chapter10: Rotational Motion And Angular Momentum

Section: Chapter Questions

Problem 2PE: Integrated Concepts An ultracentrifuge accelerates from rest to 100,000 rpm in 2.00 min. (a) What is...

See similar textbooks

Similar questions

A carnival carousel accelerates nonuniformly from rest, moving through an angle of 8.60 rad in 6.00 s. If its turning at 3.30 rad/s at that time, find (a) its average angular speed, and (b) average angular acceleration during that time interval. (See Section 7.1.)
Suppose a piece of dust has fallen on a CD. If the spin rate of the CD is 500 rpm, and the piece of dust is 4.3 cm from the center, what is the total distance traveled by the dust in 3 minutes? (Ignore accelerations due to getting the CD rotating.)
Keratinocytes are the most common cells in the skins outer layer. As these approximately circular cells migrate across a wound during the healing process, they roll in a way that reduces the frictional forces impeding their motion. (a) Given a cell body diameter of 1.00 105 m (10 m), what minimum angular speed would be required to produce the observed linear speed of 1.67 107 m/s (10 m/min)? (b) How many complete revolutions would be required for the cell to roll a distance of 5.00 103 m? (Because of slipping as the cells roll, averages of observed angular speeds and the number of complete revolutions are about three times these minimum values.)
The dung beetle is known as one of the strongest animals for its size, often forming balls of dung up to 10 times their own mass and rolling them to locations where they can be buried and stored as food. A typical dung ball formed by the species K. nigroaeneus has a radius of 2.00 cm and is rolled by the beetle at 6.25 cm/s. (a) What is the rolling balls angular speed? (b) How many full rotations are required if the beetle rolls the ball a distance of 1.00 m?
As a compact disc (CD) spins clockwise as seen from above,information is read from it, starting with the innermost ring andmoving outward. When the information is being read from theinnermost ring, the CDs angular speed is 0 = 52.4 rad /s. TheCD slows down so that when information is read from the outermost ring, = 20.9 rad /s. It takes 74 min 33 s to read themusic from a particular CD. Find the constant angular acceleration of the CD.
One method of pitching a softball is called the wind-mill delivery method, in which the pitchers arm rotates through approximately 360 in a vertical plane before the 198-gram ball is released at the lowest point of the circular motion. An experienced pitcher can throw a ball with a speed of 98.0 mi/h. Assume the angular acceleration is uniform throughout the pitching motion and take the distance between the softball and the shoulder joint to be 74.2 cm. (a) Determine the angular speed of the arm in rev/s at the instant of release, (b) Find the value of the angular acceleration in rev/s2 and the radial and tangential acceleration of the ball just before it is released, (c) Determine the force exerted on the ball by the pitchers hand (both radial and tangential components) just before it is released.
Integrated Concepts An ultracentrifuge accelerates from rest to 100,000 rpm in 2.00 min. (a) What is its angular acceleration in rad/s2? (b) What is the tangential acceleration of a point 9.50 cm from the axis of rotation? (c) What is the radial acceleration in m/s2 and multiples of g of this point at full rpm?
A grindstone increases in angular speed uniformly from 4.00 rad/s to 12.0 rad/s in 4.00 s. (a) Calculate the grindstones angular acceleration. (b) Through what angle does it turn during that time? (See Section 7.2.)
A bicycle tire is spinning clockwise at 2.50 rad/s. During a time period t = 1.25 s, the tire is slopped and spun in the opposite (counterclockwise) direction, also at 2.50 rad/s. (Calculate (a) the change in the tires angular velocity and (b) the tire's average angular acceleration av.
The tub of a washer goes into its spin cycle, starting from rest and gaining angular speed steadily for 8.00 s, at which time it is turning at 5.00 rev/s. At this point, the person doing the laundry opens the lid, and a safety switch turns off the washer. The tub smoothly slows to rest in 12.0 s. Through how many revolutions does the tub turn while it is in motion?
You have a grindstone (a disk) that is 90.0 kg, has a 0.340-m radius, and is turning at 90.0 rpm, and you press a steel axe against it with a radial force of 20.0 N. (a) Assuming the kinetic coefficient of friction between steel and stone is 0.20, calculate the angular acceleration of the grindstine. (b) How many turns will the stone make before coming to rest?
Suppose a child walks from the outer edge of a rotating merry-go-round to the inside. Does the angular velocity of the merry-go-round increase, decrease, or remain the same? Explain your answer. Assume the merry-go-round is spinning without friction.