Refrigerant-134a enters an adiabatic compressor at 100 kPa and 0 "C with a volumetric flow rate of 0.3 m3/s and leavesat a pressure of 700 kPa. The power input to the compressor is 35 kW. Using the property tables for R-134a inAppendices A-11 to A-13, Determine the following stream properties and report them in the units shown and to therequested decimal place:A. The mass flow rate of the refrigerant:kg/s (Report to 3 decimal places, eg: 0.123)B. The enthalpy of the exit stream:KJ/kg (Report to 2 decimal places, eg: 0.23)C. The temperature of the exit stream:°C (Report to 1 decimal place, eg: 0.1)100 KPa, 0°CV = 0.3 m³ /s%3DAA R-134 a35 KW700 KPa

Answered: Image /qna-images/answer/b11b37d9-590c-4083-b24a-d9a606b91e6a.jpg

Refrigerant-134a enters an adiabatic compressor at 100 kPa and 0 "C with a volumetric flow rate at a pressure of 700 kPa. The power input to the compressor is 35 kW. Using the property tables fe Appendices A-11 to A-13, Determine the following stream properties and report them in the units s requested decimal place: A. The mass flow rate of the refrigerant: kg/s (Report to 3 decimal places, B. The enthalpy of the exit stream: KJ/kg (Report to 2 decimal places, eg: C. The temperature of the exit stream: °C (Report to 1 decimal place, eg: C 100 KPa, 0°C V = 0.3 m³ /s A A R-134 a 35 KW 700 KPa

Refrigerant-134a enters an adiabatic compressor at 100 kPa and 0 "C with a volumetric flow rate at a pressure of 700 kPa. The power input to the compressor is 35 kW. Using the property tables fe Appendices A-11 to A-13, Determine the following stream properties and report them in the units s requested decimal place: A. The mass flow rate of the refrigerant: kg/s (Report to 3 decimal places, B. The enthalpy of the exit stream: KJ/kg (Report to 2 decimal places, eg: C. The temperature of the exit stream: °C (Report to 1 decimal place, eg: C 100 KPa, 0°C V = 0.3 m³ /s A A R-134 a 35 KW 700 KPa

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

What is the difference between Inlet velocity and superficial velocity?
Nitrogen enters a steady-flow heat exchanger at 150 kPa, 10°C, and 100 m/s, and it receives heat in the amount of 150 kJ/kg as it flows through it. The nitrogen leaves the heat exchanger at 100 kPa with a velocity of 200 m/s. Determine the stagnation pressure and temperature of the nitrogen at the inlet and exit states.
The static and stagnation pressures of a fluid in a pipe are measured by a piezometer and a pitot tube to be 200 kPa and 220 kPa, respectively. If the density of the fluid is 600 kg/m^3, the velocity (in m/s) of the fluid is ?"
Argon is accelerated in a nozzle from 32 m/s at 666 K to 441 m/s and 196 kPa. If the heat loss is equal to 5.1 kJ/kg, determine the gas temperature at outlet in K to 1 decimal place. Take the gas constant as 0.2 (kPa m3)/(kg K) and assume constant specific heats cp=0.5 kJ/(kg K) and cv=0.3 kJ/(kg K).
Nitrogen having a temperature of T1T1 = 290 KK . and absolute pressure of p1p1 = 330 kPakPa flows into the smooth pipe at M1M1 = 0.3. It is heated at 100 kJ/[kg⋅m]kJ/[kg⋅m]. (Figure 1) Figure 1 of 1 Part A Determine the velocity of the nitrogen when it exits the pipe at section 2. Express your answer to three significant figures and include the appropriate units. V2V2 = nothingnothing SubmitRequest Answer Part B Determine the pressure of the nitrogen when it exits the pipe at section 2. Express your answer to three significant figures and include the appropriate units. p2p2 = nothingnothing
A Pelton wheel turbine is a type of turbine that transforms the kinetic energy of water jet to rotational energy. A Pelton wheel turbine was used in a hydroelectric power plant. Water enters the turbine nozzles at 607 kPa absolute with a low velocity. If the nozzle outlets are exposed to atmospheric pressure of 116.58 kPa, determine the maximum velocity (in meter per second) to which water can be accelerated by the nozzles before striking the turbine blades
The thrust developed by the engine of a Boeing 777 is about 380 kN. Assuming choked flow in the nozzles, determine the mass flow rate of air through the nozzle. Take the ambient conditions to be 215 K and 35 kPa.
Show that in an isentropic process involving flow in a horizontal flow path, vdP + VdV = 0.
Air enters a compressor at a temperature of 100 kPa and 25°C and leaves the compressor at a temperature of 277°C and a speed of 75 m/s.1350 kj/min heat loss occurs from the compressor to the ambient environment. Since the power required for the compressor is 210 kW, determine the compressor's flow rate.(Note: the potential energy change is negligible.)
Air flows with negligible friction through a 6-in-diameter duct at a rate of 9 lbm/s. The temperature and pressure at the inlet are T1 = 800 R and P1 = 30 psia, and the Mach number at the exit is Ma2 = 1. Determine the rate of heat transfer and the pressure drop for this section of the duct.
The air velocity in the duct of a heating system is to be measured by a Pitot-static probe inserted into the duct parallel to the flow. If the differential height between the water columns connected to the two outlets of the probe is 3.2 cm, determine (a) the flow velocity and (b) the pressure rise at the tip of the probe. The air temperature and pressure in the duct are 45° C and 98 kPa, respectively
Determine the units of the quantity sbar/Ru, where sbar is the molar specific entropy and Ru is the universal gas constant.