Correct and complete solution please don't copy !Required informationHot engine oil at 150°C is flowing in parallel over a flat plate at a velocity of 3.20 m/s. Surface temperature of the 1.700-mlong flat plate is constant at 50°C. The properties of engine oil at Tf = (150°C + 50°C)/2 = 100°C are k= 0.1367 W/m-K, v=2.046 x 10-5 m2/s, Pr = 279.1.Determine the local convection heat transfer coefficient at 0.200 m from the leading edge and the average convection heat transfercoefficient using the Churchill and Ozoe (1973) relation.The local convection heat transfer coefficient at 0.200 m from the leading edge is] W/m²K.The average convection heat transfer coefficient is]W/m2-K.

Answered: Image /qna-images/answer/ecaf29d6-a610-45ef-9d72-b60b15e65a17.jpg

Required information Hot engine oil at 150°C is flowing in parallel over a flat plate at a velocity of 3.20 m/s. Surface temperature of the 1.700-m long flat plate is constant at 50°C. The properties of engine oil at Tf = (150°C + 50°C)/2 = 100°C are k= 0.1367 W/m-K, v= 2.046 x 10-5 m²/s, Pr = 279.1. Determine the local convection heat transfer coefficient at 0.200 m from the leading edge and the average convection heat transfer coefficient using the Churchill and Ozoe (1973) relation. The local convection heat transfer coefficient at 0.200 m from the leading edge is |W/m2.K. The average convection heat transfer coefficient is W/m2-K.

Required information Hot engine oil at 150°C is flowing in parallel over a flat plate at a velocity of 3.20 m/s. Surface temperature of the 1.700-m long flat plate is constant at 50°C. The properties of engine oil at Tf = (150°C + 50°C)/2 = 100°C are k= 0.1367 W/m-K, v= 2.046 x 10-5 m²/s, Pr = 279.1. Determine the local convection heat transfer coefficient at 0.200 m from the leading edge and the average convection heat transfer coefficient using the Churchill and Ozoe (1973) relation. The local convection heat transfer coefficient at 0.200 m from the leading edge is |W/m2.K. The average convection heat transfer coefficient is W/m2-K.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.7P: 5.7 The average Reynolds number for air passing in turbulent flow over a 2-m-long, flat plate is ....

See similar textbooks

Similar questions

5.7 The average Reynolds number for air passing in turbulent flow over a 2-m-long, flat plate is . Under these conditions, the average Nusselt number was found to be equal to 4150. Determine the average heat transfer coefficient for an oil having thermal properties similar to those in Appendix 2, Table 18, at at the same Reynolds number and flowing over the same plate.
During a cold winter day, wind at 55 km/h is blowing parallel to a 4m high and 10m long wall of a house. If the air outside is at 5 degrees Celsius and the surface temperature of the wall is 12 degrees Celsius , determine the rate of heat loss from the wall by convection. What would your answer be if the wind velocity has doubled? From Table A-1:thermal conductivity, k = 0.0246 W/m degrees Celsiusviscosity, v = 1.4 x 10^-5 m^2/sPrandtl no. Pr = 0.717
A 20degC water flows to 50cmx60cm flat plate with velocity of 6m/s . The flat plate surface temperature is maintained at 40deg C. The air flows parallel to the 50cm side of the plate. If the kinematic viscosity of water is 78x10-8 m2/s, at what length the flow become turbulent? If the average laminar heat transfer coefficient of water is 7740W/m2 degC, what is the overall heat transfer at the laminar section?
Air at 30oC (density=1.165 kg/m3, kinematic viscosity = 16x10-5 m2/s) flows over a flat plate at a free stream velocity of 4.19 m/s. Determine the boundary layer thickness at distances of 0.2m, 0.5 m and 0.8 m. Also determine the skin friction coefficients, both local and average, at these locations.
Air at 20 ◦ C flows inside a pipe 18-mm-ID having a uniform heat flux of 150 W/m 2 on the surface, the average flow velocity at entry being 1.0 m/s. The air pressure is 2 bar. Determine the value of convection coefficient. If the pipe is 2.5 m long, determine the air exit temperature and the wall temperature at the exit. Assume fully developed hydrodynamic boundary layer.
Consider laminar flow of air across a hot circular cylinder. At what point on the cylinder will the heat transfer be highest? What would your answer be if the flow were turbulent?
A 1.2-in-outer-diameter pipe is to span across a river at a 140-ft-wide section while being completely immersed in water. The average flow velocity of the water is 10 ft/s, and its temperature is 70°F. Determine the drag force exerted on the pipe by the river.
Engine Oil at 58.95 degrees celsius Flows over a 5m long flat plate whose temperature is 20.11 degrees celsius with a velocity of 2.2m/s. Determine the rate of heat transfer (W), considering forced convection, per unit width of the entire plate. Density = 876kg/m^3 Thermal conductivity = 0.144W/m-K Pr = 2870 dynamic viscosity = 0.21kg/m-s Q = ?
Question No. 3: During a cold winter day, wind at 55 km/h is blowing parallel to a 4-m-high and 10-m-long wall of a house. If the air outside is at 5°C and the surface temperature of the wall is12°C, determine the rate of heat loss from that wall by convection. What would your answer be if the wind velocity was doubled
Consider laminar flow over a flat plate. How does the local friction coefficient change with position?
A 10-cm shaft rides in a 10.03-cm sleeve and 12-cm long, the clearance space (assumed to be uniform) being filled with lubricating oil (? = 0.11 ?? − ?). Calculate the rate at which heat is generated when the shaft turns at 100 rpm in Watts (W). (Rate of energy = Frictional force/resistance x Velocity)
Mercury at 25°C flows over a 3-m-long and 2-m-wide flat plate maintained at 75°C with a velocity of 0.01 m/s. Determine the rate of heat transfer from the entire plate.