Required information Problem 05.038 - Diffuser flow DEPENDENT MULTI-PART PROBLEM - ASSIGN ALL PARTS NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Air at 80 kPa, 27°C, and 220 m/s enters a diffuser at a rate of 2.5 kg/s and leaves at 42°C. The exit area of the diffuser is 430 cm2. The air is estimated to lose heat at a rate of 18 kJ/s during this process. The gas constant of air is 0.287 kPa-m3/kg-K. The enthalpies are m = 300.19 kJ/kg and h2 = 315.27 kJ/kg. Problem 05.038.a - Diffuser flow Determine the exit velocity of the air. (You must provide an answer before moving on to the next part.) The exit velocity of the air is m/s.

Required information Problem 05.038 - Diffuser flow DEPENDENT MULTI-PART PROBLEM - ASSIGN ALL PARTS NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Air at 80 kPa, 27°C, and 220 m/s enters a diffuser at a rate of 2.5 kg/s and leaves at 42°C. The exit area of the diffuser is 430 cm2. The air is estimated to lose heat at a rate of 18 kJ/s during this process. The gas constant of air is 0.287 kPa-m3/kg-K. The enthalpies are m = 300.19 kJ/kg and h2 = 315.27 kJ/kg. Problem 05.038.a - Diffuser flow Determine the exit velocity of the air. (You must provide an answer before moving on to the next part.) The exit velocity of the air is m/s.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter6: Forced Convection Over Exterior Surfaces

Section: Chapter Questions

Problem 6.12P

See similar textbooks

Similar questions

Please Help,will provide helpful e Ratings for correct solution. Thank You. Water flows through a horizontal coil through which high-temperature flue gas passes. As water passes through the coil, it passes from the liquid phase at 200 kPa and 80°C to the vapor phase at 100 kPa and 125°C. The entry speed of water into the coil is 3 m/s and the exit speed of steam is 200 m/s. Calculate the heat transferred per unit mass of water through the coil? The enthalpies of the inlet and outlet streams are given as 334.9 kJ/kg and 2726.5 kJ/kg, respectively.
Water flows through a horizontal coil heated by steam condenaing on the outside. If the inlet pressure and temperatire are 2 atm and 160°F (state 1) and at the exit 1 atm and 220 °F (state 2), calculate the heat added to the coil per pound mass of water. The entering velocity is 5 ft/s, and the leaving, 500 ft/s. Data: H1=127.9 Btu/lb, H2=1154.4 Btu/lbA. 1031 Btu/lbB. 1042 Btu/lbC. 1048 Btu/lbD. 1052 Btu/lb
At a particular stage of a reaction turbine the mean blade speed is 140 m/sec and the steam is at a pressure of 20 bar with temperature of 250° C. Fixed and moving blades at this stage have inlet angles 30° and exit angles 20°. The stage efficiency is 80%. Determine (1) Specific entholpy drop across the stage in kJ/kg. (i) Drum Dia and blade height if heigh is one-twelfth of the drum dia. and the steam flow is 120 kg/sec. (ii) The percentage increase in the relative velocity across the bladings as a result of pressure drop across the blading.
Air at a static temperature and pressure of 8°C and 75 kPa respectively enters the intake of an aircraft gas turbine engine with a velocity of 196 m/s. The intake may be regarded as a diffuser with an inlet area of 0.4 m2 and an exit area that reduces the air flow velocity essentially to zero. Calculate the mass flow rate (kg/s) of air through the intake, given the specific gas (air) constant as 287 J/(kg.K), keeping three decimal places.
At a particular stage of a reaction turbine the mean blade speed is 140 m/sec and the steam is at a pressure of 20 bar with temperature of 250° C. Fixed and moving blades at this stage have inlet angles 30° and exit angles 20°. The stage efficiency is 80%. Determine (1) Specific entholpy drop across the stage in kJ/kg.
Engineer CoolAir is working on designing an air conditioning unit that handles the combined air flow from two food processing rooms with the following quantities: 4000 ft^3/ min at 80° F wet bulb and 50% saturated; 3000 ft^3/min at 70° F dry bulb and 65°F wet bulb temperatures. (a) What is the total mass flow rate? (b) What is the dry bulb temperature? (c) what is the wet bulb temperature?
Your second customer wants to determine the dissipated electrical power by a personal computer, which has a fan that draws 5 L/s of air at 101.325 kPa and 21°C through the box containing the CPU and other components. After that air leaves at 101.325 kPa and 30 °C. Part 1Derive the steady flow energy equation (SFEE) from the first principles. You are required to show all the steps in deriving the SFEE and using both the principles of mass and energy conversation.Part 2Produce specific steady state energy equation (SFEE) by stating all the stated assumption in this equipment in order to be used in later stages without further analysis. Then calculate the pump power.Part 3Apply the short form to determine the dissipated electrical power by the personal computer.
Air at a static temperature and pressure of 9°C and 100 kPa respectively enters the intake of an aircraft gas turbine engine with a velocity of 206 m/s. The intake may be regarded as a diffuser with an inlet area of 0.4 m2 and an exit area that reduces the air flow velocity essentially to zero. Calculate the mass flow rate (kg/s) of air through the intake, given the specific gas (air) constant as 287 J/(kg.K)
For air properties use online source: https://www.peacesoftware.de/einigewerte/luft_e.html The compressor is operating at steady-state increasing pressure of R-22 refrigerant from 4 bars to 14 bars. Temperature was rising during the process from 12C to 90C. The inlet volumetric flow rate is 1 m3/min and inlet diameter is 0.03m. At the exit the diameter is the same. Heat flow to the surroundings can be neglected. Determine: a.Mass flow rate [kg/s] SHOW AND EXPLAIN ALL STEPS PLEASE thanks
For air properties use online source: https://www.peacesoftware.de/einigewerte/luft_e.html The compressor is operating at steady-state increasing pressure of R-22 refrigerant from 4 bars to 14 bars. Temperature was rising during the process from 12C to 90C. The inlet volumetric flow rate is 1 m3/min and inlet diameter is 0.03m. At the exit the diameter is the same. Heat flow to the surroundings can be neglected. Determine: a.Mass flow rate [kg/s] SHOW AND EXPLAIN ALL STEPS PLEASE
For air properties use online source: https://www.peacesoftware.de/einigewerte/luft_e.html The compressor is operating at steady-state increasing pressure of R-22 refrigerant from 4 bars to 14 bars. Temperature was rising during the process from 12C to 90C. The inlet volumetric flow rate is 1 m3/min and inlet diameter is 0.03m. At the exit the diameter is the same. Heat flow to the surroundings can be neglected. Determine: a.Mass flow rate [kg/s] b. Inlet and outlet velocity [m/s] c.Power required to run the compressor [kW]
The air considered as the ideal gas flows through the compressor and heat exchanger at a volumetric flow rate of 26.91 m3 / min as shown in the figure. At the same time, a stream of liquid water passes through the heat exchanger. The information given in the figure is for continuous flow. Considering the compressor and heat exchanger as adiabatic and ignoring kinetic and potential energy changes, a) the power requirement of the compressor (kW) and the mass flow rate of the cooling water (kg / h),b) Calculate the entropy generation (kW / K) per unit time for the compressor and heat exchanger.