-Water vapor enters an adiabatic turbine at a pressure of 6.5MPA and a temperature of 400 ° C, with a mass flow of 2.43 kg / s, and expands up to 75 kPa pressure. The isentropic efficiency of the turbine is 84%. Calculate (a) the temperature of the steam at the turbine outlet and (b) the power of the turbine, neglecting the kinetic and potential energy change of the steam. 75kPa steam turbine 6500 kPa 400°C

-Water vapor enters an adiabatic turbine at a pressure of 6.5MPA and a temperature of 400 ° C, with a mass flow of 2.43 kg / s, and expands up to 75 kPa pressure. The isentropic efficiency of the turbine is 84%. Calculate (a) the temperature of the steam at the turbine outlet and (b) the power of the turbine, neglecting the kinetic and potential energy change of the steam. 75kPa steam turbine 6500 kPa 400°C

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Helium gas enters a nozzle whose isentropic efficiency is 94 percent with a low velocity, and it exits at 14 psia, 180°F, and 1000 ft/s. Determine the pressure and temperature at the nozzle inlet
Steam flows steadily through an adiabatic turbine. The inlet conditionsof the steam are 10 MPa, 450°C, and 80 m/s, and the exit conditions are 10 kPa, and 50 m/s.The mass flow rate of the steam is 12 kg/s. The power output of the turbine is 10.2 MW.Determine(a) the temperature of the water as it leaves the turbine,(b) the quality x of the water as it leaves the turbine,(c) the inlet and outlet cross-sectional area.
A stream of refrigerant-134a at 1 MPa and 12°C is mixed with another stream at 1 MPaand 60°C. If the mass flow rate of the cold stream is twice that of the hot one, determine the temperature and the quality of the exit stream.
Saturated vapor enters the turbine at 8.0 MPa and exits 0.008 MPa. The turbine has an isentropic efficiency of 82.56%. Velocity and elevation changes are insignificant. Determine the electrical power it can produce in kW if the mass of steam is 33.4 kg/s, and the mechanical and electrical efficiencies are 78.02% and 94.7%.
Argon gas enters an adiabatic compressor at 14 psia and 75°F with a velocity of 60 ft/s, and it exits at 200 psia and 240 ft/s. If the isentropic efficiency of the compressor is 87 percent, determine the exit temperature of the argon.
Saturated vapor enters the turbine at 8.0 MPa and exits 0.008 MPa. The turbine has an isentropic efficiency of 82.26%. Velocity and elevation changes are insignificant. Determine the electrical power it can produce in kW if the mass of steam is 25.2 kg/s, and the mechanical and electrical efficiencies are 75.56% and 93.31%. FINAL ANSWER MUST BE IN 3 DECIMAL POINTS.
Steam enters a converging–diverging nozzle at 1 MPa and 500°C with a negligible velocity at a mass flow rate of 2.5 kg/s, and it exits at a pressure of 200 kPa. Assuming the flow through the nozzle to be isentropic, determine the exit area of the nozzle.
saturated vapor enters the turbine at 9.0 mpa and exits 0.009 mpa. The turbine has an isentropic efficiency of 80.28%.Velocity and elevation changes are insignificant. Determine the electrical power it can produce in KW if the mass of steam is 25.03 kg/s, and the mechanical and electrical efficiencies are 78.87% and 85.72%
Saturated vapor enters the turbine at 8.0 MPa and exits 0.008 MPa. The turbine has an isentropic efficiency of 82.06% Velocity and elevation changes are insignificant. Determine the electrical power it can produce in kW if the mass of steam is 32.9 kg/s, and the mechanical and electrical efficiencies are 77.75% and 93.32%. For the steam table, please use the green book entitled "Thermodynamics Properties of Water Including Vapor, Liquid, and Solid Phases" by Keenan, Keyes, Hill, and Moore.
Oxygen at 300 kPa and 90°C flowing at an average velocity of 3 m/s is expanded in an adiabatic nozzle. What is the maximum velocity of the oxygen at the outlet of this nozzle when the outlet pressure is 120 kPa?
Steam at 1000 kPa, a temperature of 300°C, and a velocity of 50 m/s. The steam leaves the turbine at a pressure of 150 kPa and a velocity of 200 m/s. Determine the work per kg of steam flowing through the turbine, assuming the process to be reversible and adiabatic.
Determine the power produced by an adiabatic turbine if steam enters at 2 MPaa and 400 °C and leaves at a pressure of 6 kPaa. What is the quality of steam leaving the turbine? The mass flow rate of steam is 15 kg. Solve using steam tables