Required information [The following information applies to the questions displayed below.] Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The company has two manufacturing departments-Molding and Fabrication. It started, completed, and sold only two jobs during March- Job P and Job Q. The following additional information is available for the company as a whole and for Jobs P and Q (all data and questions relate to the month of March): Estimated total machine-hours used Estimated total fixed manufacturing overhead Estimated variable manufacturing overhead per machine-hour Molding 2,600 $ 10,400 $1.40 Fabrication 1,560 $ 15,600 $2,20 Total 4,160 $ 26,000 Job P $ 13,520 $ 21,840 Job Q $ 8,320 $ 7,800 Direct materials Direct labor cost Actual machine-hours used: Molding Fabrication 1,780 620 830 930 Total 2,400 1,760 Sweeten Company had no underapplied or overapplied manufacturing overhead cos during the month. Required: For questions 1 to 9, assume that Sweeten Company uses departmental predetermined overhead rates with machine- hours as the allocation base in both departments and Job P included 20 units and Job Q included 30 units. For questions 10 to 15, assume that the company uses a plantwide predetermined overhead rate with machine-hours as the allocation base.
Q: Anwer Incorporation has provided the following data for the month of September. There were no…
A: Overhead Cost: Overhead cost is the expense incurred in the operations of a business. This expense…
Q: What was Sweeten Company’s cost of goods sold for March?
A: Cost of Goods Sold is the cost of manufacturing the goods that has been sold during a financial…
Q: Required information [The following information applies to the questions displayed below.]…
A: Specific unit of a product which is manufactured, or a batch of similar units which are manufactured…
Q: The following balances are known for A Company at the begining of the year: Direct…
A: Formula for Cost of Goods Manufactured: - Cost of goods manufactured = Cost of goods sold + closing…
Q: Arman Incorporation has provided the following data for the month of September. There were no…
A: The under/over applied overheads are to be allocated to the accounts on which overheads have been…
Q: [The following information applies to the questions displayed below.] Sweeten Company had no…
A: Unit product cost is the cost of producing a single unit of output. Unit product cost is calculated…
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: The formula for calculating Unit product cost:
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: Definition: Total manufacturing cost: Its the addition of direct materials , direct labor ,…
Q: Dynamic Company has only Job 844 in process on March 1 of the current year. The job has been charged…
A: Cost of good sold The cost of labour, materials, and manufacturing overhead are the only costs that…
Q: Required information [The following information applies to the questions displayed below.] Sweeten…
A: JOB Costing :— Job Costing is a Cost accounting method which help to Track the Cost of Individual…
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: Here we used the concept of Overhead Predetermined Overhead rate is a rate that to be estimated for…
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: "As per bartleby guidelines we will solve the first three question for you. If you want any specific…
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: The predetermined overhead rate refers to the rate at which the estimated overhead is to be…
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: Definition of materials: Materials are physical and tangible. Materials are used for further…
Q: Required information [The following information applies to the questions displayed below.] Sweeten…
A: Fixed manufacturing overhead per machine hour for - Molding =Estimated total fixed manufacturing…
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: The overhead rate is calculated as estimated overhead cost divided by estimated base activity.
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: Predetermined overhead rate = (Estimated variable overhead + Estimated fixed overhead ) /…
Q: Required information [The following information applies to the questions displayed below.]…
A:
Q: Hyder Incorporation has provided the following data for the month of September. There were no…
A: Over-applied overhead and under-applied overhead is the difference of standard overhead applied…
Q: or questions 1-9, assume that Sweeten Company uses departmental predetermined overhead rates with…
A: Solution:- Computation of departmental overhead rates Particulars Molding Fabrication…
Q: Coatney Incorporated has provided the following data for the month of October. There were no…
A: Given, Finished Goods Inventory before allocation of Under/Over-applied OH = $34,530 Overapplied OH…
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: Direct materials are the real items that are used to create a product. Direct materials for a baker,…
Q: Weatherhead Inc. has provided the following data for the month of March. There were no beginning…
A: Allocation percentage = $5,860/$53,020 Allocation percentage = 11%
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: Disclaimer: “Since you have asked multiple questions, we will solve the first question for you. If…
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: Job costing is the accounting of all the costs and expenses incurred in the execution of a…
Q: During December, Moulding Corporation incurred $86,000 of actual Manufacturing Ooverhead costs.…
A: Under applied (overapplied) manufacturing overhead costs = Actual manufacturing overhead costs -…
Q: Required information [The following information applies to the questions displayed below.]…
A: A job in a job costing can be defined as specific unit of product that is manufactured, or a batch…
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: Manufacturing cost consists of all the costs (direct cost as well as indirect cost) incurred in…
Q: Dynamic Company has only Job 844 in process on March 1 of the current year. The job has been charged…
A: Beginning WIP = Direct material + direct labor + manufacturing overhead costs = 2000+2500+1750 =…
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: Note: Answering the first three subparts as there are multiple subparts, please submit a new…
Q: [The following information applies to the questions displayed below.] Sweeten Company had no jobs in…
A: Total Cost- It refers to the link between the cost of product and also the number of units sold .It…
Q: 6. What was the total manufacturing cost assigned to Job Q?
A: In this numerical has covered the concept of Overhead Calculation
Q: The following account appears in the ledger after only part of the postings have been completed for…
A: Prime cost means the addition of direct material and direct labor and other direct expenses.…
Q: Prepare a journal entry to close out the balance in the Manufacturing Overhead account and prorate…
A: What is underapplied overhead? Underapplied overhead refers to the amount of actual factory…
Q: The following account appears in the ledger after only part of the postings have been completed for…
A: "Hey, since there are multiple questions posted, we will answer the first question. If you want any…
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: Formula: Predetermined overhead rate = Estimated total manufacturing overhead cost / Total amount of…
Q: Required information [The following information applies to the questions displayed below.]…
A: Manufacturing overhead is the overhead included in the cost sheet to show cost incurred for…
Q: [The following information applies to the questions displayed below.] Sweeten Company had no jobs in…
A: Job costing is a method of costing in which all costs are assigned and accumulated on the basis of…
Q: Required information (The following information applies to the questions displayed below] Sweeten…
A: Here in this question, we are require to calculate applied overhead to Job P and Job Q. Lets start…
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: Since, you have specifically asked for question 9, so we will solve that for you.
Q: eginning of March and no beginning Inventories. The company has hwo manufacturing…
A: Plantwide predetermined overhwad rate=Total overheadTotal machine hour
Q: Required information [The following information applies to the questions displayed below.]…
A: Absorption rate for manufacturing overhead is as follows Resultant table:
Q: During the most recent month, the company started and completed two jobs--Job B and Job K. There…
A: Pre Determined OH :— A predetermined overhead rate is an allocation rate that is used to apply the…
Q: [The following information applies to the questions displayed below.] Sweeten Company had no jobs in…
A: The overhead is applied to the production on the basis of predetermined overhead rate.
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: As per the instructions provided in the question, for sub-questions 1-9, departmental predetermined…
Q: Required information [The following information applies to the questions displayed below.) Sweeten…
A: Given : Molding Fabrication Total Estimated total machine-hours used 2,900 1,740 4,640…
Q: [The following information applies to the questions displayed below.] Sweeten Company had no jobs in…
A: Total manufacturing cost is the aggregate amount of cost incurred by a business to produce goods in…
Q: ! Required information [The following information applies to the questions displayed below.] Sweeten…
A: Under the cost-plus pricing method, the selling price of the product is determined by adding the…
Q: Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The…
A: Definition of Total product cost: Total product cost consists costs of Direct materials , Direct…
Trending now
This is a popular solution!
Step by step
Solved in 4 steps
- Nelson Fabrication Inc. had a remaining credit balance of $20,000 in its under- and overapplied factory overhead account at year-end. The balance was deemed to be large and, therefore, should be closed to Work in Process, Finished Goods, and Cost of Goods Sold. The year-end balances of these accounts, before adjustment, showed the following: Determine the prorated amount of the overapplied factory overhead that is chargeable to each of the accounts. Prepare the journal entry to close the credit balance in Under-and Overapplied Factory Overhead.Chrome Solutions Company manufactures special chromed parts made to the order and specifications of the customer. It has two production departments, Stamping and Plating, and two service departments, Power and Maintenance. In any production department, the job in process is wholly completed before the next job is started. The company operates on a fiscal year, which ends September 30. Following is the post-closing trial balance as of September 30: Additional information: The balance of the materials account represents the following: The company uses the FIFO method of accounting for all inventories. Material A is used in the Stamping Department, and materials B and C are used in the Plating Department. The balance of the work in process account represents the following costs that are applicable to Job 905. (The customer’s order is for 1,000 units of the finished product.) The finished goods account reflects the cost of Job 803, which was finished at the end of the preceding month and is awaiting delivery orders from the customer. At the beginning of the year, factory overhead application rates were based on the following data: In October, the following transactions were recorded: Purchased the following materials and supplies on account: The following materials were issued to the factory: Customers’ orders covered by Jobs 1001 and 1002 are for 1,000 and 500 units of finished product, respectively. Factory wages and office, sales, and administrative salaries are paid at the end of each month. (Assume FICA and federal income tax rates of 8% and 10%, respectively.) Record the company’s liability for state and federal unemployment taxes. (Assume rates of 4% and 1%, respectively, and that none of the employees had reached the $8,000 limit.) Record the payroll distribution for October. Wages of the supervisors, custodial personnel, etc., totaled $9,500; administrative salaries were $18,300. Miscellaneous factory overhead incurred during October totaled $4,230. Miscellaneous selling and administrative expenses were $1,500. These items as well as the FICA tax and federal income tax withheld for September were paid. (See account balances on the post-closing trial balance for September 30.) Annual depreciation on plant assets is calculated using the following rates (round to nearest dollar): Factory buildings–5% Machinery and equipment–20% Office equipment–20% The balance of the prepaid insurance account represents a three-year premium for a fire insurance policy covering the factory building and machinery. It was paid on the last day of the preceding month and became effective on October 1. The summary of factory overhead prepared from the factory overhead ledger is reproduced here: The total expenses of the Maintenance Department are distributed on the basis of floor space occupied by the Power Department (8,820 sq ft), Stamping Department (19,500 sq ft), and Plating Department (7,875 sq ft). The power department expenses are then allocated equally to the Stamping and Plating departments. After the actual factory overhead expenses have been distributed to the departmental accounts and the applied factory overhead has been recorded and posted, any balances in the departmental accounts are transferred to Under- and Overapplied Overhead. Jobs 905 and 1001 were finished during the month. Job 1002 is still in process at the end of the month. During the month, Jobs 803 and 905 were sold with a mark-on percentage of 50% on cost. Received $55,500 from customers in payment of their accounts. Checks were issued in the amount of $43,706 for payment of the payroll. Required: Set up the beginning trial balance in T-accounts. Prepare materials inventory ledger cards and enter October 1 balances. Prepare a Payroll Summary and Schedule of Earnings and Payroll Taxes for the month of October. Set up job cost sheets as needed. Record all transactions and related entries for October and post to T-accounts. Prepare a service department expense distribution worksheet for October. At the end of the month: Analyze the balance in the materials account, the work in process account, and the finished goods account. Prepare the statement of cost of goods manufactured for the month ended October 31.[The following information applies to the questions displayed below.] Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The company has two manufacturing departments—Molding and Fabrication. It started, completed, and sold only two jobs during March—Job P and Job Q. The following additional information is available for the company as a whole and for Jobs P and Q (all data and questions relate to the month of March): Molding Fabrication Total Estimated total machine-hours used 2,500 1,500 4,000 Estimated total fixed manufacturing overhead $ 15,000 $ 18,000 $ 33,000 Estimated variable manufacturing overhead per machine-hour $ 3.40 $ 4.20 Job P Job Q Direct materials $ 33,000 $ 18,000 Direct labor cost $ 37,000 $ 15,500 Actual machine-hours used: Molding 3,700 2,800 Fabrication 2,600 2,900 Total 6,300 5,700 Sweeten Company…
- Required information [The following information applies to the questions displayed below.] Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The company has two manufacturing departments—Molding and Fabrication. It started, completed, and sold only two jobs during March—Job P and Job Q. The following additional information is available for the company as a whole and for Jobs P and Q (all data and questions relate to the month of March): Molding Fabrication Total Estimated total machine-hours used 2,500 1,500 4,000 Estimated total fixed manufacturing overhead $ 13,000 $ 16,800 $ 29,800 Estimated variable manufacturing overhead per machine-hour $ 2.60 $ 3.40 Job P Job Q Direct materials $ 25,000 $ 14,000 Direct labor cost $ 30,600 $ 12,300 Actual machine-hours used: Molding 2,900 2,000 Fabrication 1,800 2,100 Total 4,700 4,100…Required information [The following information applies to the questions displayed below.] Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The company has two manufacturing departments—Molding and Fabrication. It started, completed, and sold only two jobs during March—Job P and Job Q. The following additional information is available for the company as a whole and for Jobs P and Q (all data and questions relate to the month of March): Molding Fabrication Total Estimated total machine-hours used 2,500 1,500 4,000 Estimated total fixed manufacturing overhead $ 13,000 $ 16,800 $ 29,800 Estimated variable manufacturing overhead per machine-hour $ 2.60 $ 3.40 Job P Job Q Direct materials $ 25,000 $ 14,000 Direct labor cost $ 30,600 $ 12,300 Actual machine-hours used: Molding 2,900 2,000 Fabrication 1,800 2,100 Total 4,700 4,100…Required information [The following information applies to the questions displayed below.] Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The company has two manufacturing departments—Molding and Fabrication. It started, completed, and sold only two jobs during March—Job P and Job Q. The following additional information is available for the company as a whole and for Jobs P and Q (all data and questions relate to the month of March): Molding Fabrication Total Estimated total machine-hours used 2,500 1,500 4,000 Estimated total fixed manufacturing overhead $ 13,000 $ 16,800 $ 29,800 Estimated variable manufacturing overhead per machine-hour $ 2.60 $ 3.40 Job P Job Q Direct materials $ 25,000 $ 14,000 Direct labor cost $ 30,600 $ 12,300 Actual machine-hours used: Molding 2,900 2,000 Fabrication 1,800 2,100 Total 4,700 4,100…
- Required information [The following information applies to the questions displayed below.] Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The company has two manufacturing departments—Molding and Fabrication. It started, completed, and sold only two jobs during March—Job P and Job Q. The following additional information is available for the company as a whole and for Jobs P and Q (all data and questions relate to the month of March): Molding Fabrication Total Estimated total machine-hours used 2,500 1,500 4,000 Estimated total fixed manufacturing overhead $ 13,000 $ 16,800 $ 29,800 Estimated variable manufacturing overhead per machine-hour $ 2.60 $ 3.40 Job P Job Q Direct materials $ 25,000 $ 14,000 Direct labor cost $ 30,600 $ 12,300 Actual machine-hours used: Molding 2,900 2,000 Fabrication 1,800 2,100 Total 4,700 4,100…Required information [The following information applies to the questions displayed below.] Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The company has two manufacturing departments—Molding and Fabrication. It started, completed, and sold only two jobs during March—Job P and Job Q. The following additional information is available for the company as a whole and for Jobs P and Q (all data and questions relate to the month of March): Molding Fabrication Total Estimated total machine-hours used 2,500 1,500 4,000 Estimated total fixed manufacturing overhead $ 13,000 $ 16,800 $ 29,800 Estimated variable manufacturing overhead per machine-hour $ 2.60 $ 3.40 Job P Job Q Direct materials $ 25,000 $ 14,000 Direct labor cost $ 30,600 $ 12,300 Actual machine-hours used: Molding 2,900 2,000 Fabrication 1,800 2,100 Total 4,700 4,100…Required information [The following information applies to the questions displayed below.] Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The company has two manufacturing departments—Molding and Fabrication. It started, completed, and sold only two jobs during March—Job P and Job Q. The following additional information is available for the company as a whole and for Jobs P and Q (all data and questions relate to the month of March): Molding Fabrication Total Estimated total machine-hours used 2,500 1,500 4,000 Estimated total fixed manufacturing overhead $ 13,000 $ 16,800 $ 29,800 Estimated variable manufacturing overhead per machine-hour $ 2.60 $ 3.40 Job P Job Q Direct materials $ 25,000 $ 14,000 Direct labor cost $ 30,600 $ 12,300 Actual machine-hours used: Molding 2,900 2,000 Fabrication 1,800 2,100 Total 4,700 4,100…
- Required information [The following information applies to the questions displayed below.] Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The company has two manufacturing departments—Molding and Fabrication. It started, completed, and sold only two jobs during March—Job P and Job Q. The following additional information is available for the company as a whole and for Jobs P and Q (all data and questions relate to the month of March): Molding Fabrication Total Estimated total machine-hours used 2,500 1,500 4,000 Estimated total fixed manufacturing overhead $ 13,000 $ 16,800 $ 29,800 Estimated variable manufacturing overhead per machine-hour $ 2.60 $ 3.40 Job P Job Q Direct materials $ 25,000 $ 14,000 Direct labor cost $ 30,600 $ 12,300 Actual machine-hours used: Molding 2,900 2,000 Fabrication 1,800 2,100 Total 4,700 4,100…Required information [The following information applies to the questions displayed below.] Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The company has two manufacturing departments—Molding and Fabrication. It started, completed, and sold only two jobs during March—Job P and Job Q. The following additional information is available for the company as a whole and for Jobs P and Q (all data and questions relate to the month of March): Molding Fabrication Total Estimated total machine-hours used 2,500 1,500 4,000 Estimated total fixed manufacturing overhead $ 13,000 $ 16,800 $ 29,800 Estimated variable manufacturing overhead per machine-hour $ 2.60 $ 3.40 Job P Job Q Direct materials $ 25,000 $ 14,000 Direct labor cost $ 30,600 $ 12,300 Actual machine-hours used: Molding 2,900 2,000 Fabrication 1,800 2,100 Total 4,700 4,100…Required information [The following information applies to the questions displayed below.] Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. The company has two manufacturing departments—Molding and Fabrication. It started, completed, and sold only two jobs during March—Job P and Job Q. The following additional information is available for the company as a whole and for Jobs P and Q (all data and questions relate to the month of March): Molding Fabrication Total Estimated total machine-hours used 2,500 1,500 4,000 Estimated total fixed manufacturing overhead $ 13,000 $ 16,800 $ 29,800 Estimated variable manufacturing overhead per machine-hour $ 2.60 $ 3.40 Job P Job Q Direct materials $ 25,000 $ 14,000 Direct labor cost $ 30,600 $ 12,300 Actual machine-hours used: Molding 2,900 2,000 Fabrication 1,800 2,100 Total 4,700 4,100…