[select all that apply] The total energy of a closed systemcan change as a result of energy transfer across the system boundary by workcan change as a result of energy transfer across the system boundary by heat transfercan change as a result of energy transfer accompanying mass flow across the boundarycannot change [select all that apply] If a closed system undergoes a thermodynamic cycle,net heat transfer is zerosome but not all properties return to their initial valuesnet work is zeronet work and net heat transfer are nonzero and equalall properties return to their initial valuesnet work and net heat transfer are nonzero but not equal

As per our guidelines we are supposed to solve only one question per post if multiple questions are…

[select all that apply] The total energy of a closed system can change as a result of energy transfer across the system boundary by work can change as a result of energy transfer across the system boundary by heat transfer can change as a result of energy transfer accompanying mass flow across the boundary cannot change

[select all that apply] The total energy of a closed system can change as a result of energy transfer across the system boundary by work can change as a result of energy transfer across the system boundary by heat transfer can change as a result of energy transfer accompanying mass flow across the boundary cannot change

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Engineering economics Investing in Electrical Efficiency Two pumps capable of delivering 100 hp to an agricultural application are being evaluated in a present economy study. The selected pump will only be utilized for one year, and it will have no market value at the end of the year. Pertinent data are summarized as follows: ABC Pump XYZ PumpPurchase price $2,900 $6,200Maintenance cost $170 $510Efficiency 80% 90% If electric power costs $0.10 per kWh and the pump will be operated 4,000 hours per year, which pump should be chosen? Recall that 1 hp = 0.746 kW. Choose XYZ because it provides least cost.
Suppose we got the following data during a test of a 2- stroke engine in which gas is usedas a fuel:Diameter of the piston = 149 mmStroke length = 179 mmClearance volume = 0.88 literrpm of the engine = 302Indicated mean effective pressure = 6.0 barGas consumption = 6.0 m3/hCalorific value of the gas (fuel) = 16990 kJ/m3Make a clear sketch the geometry of this engine using the data and determine thefollowing:i. Indicated power developed by the engine in watt.ii. Air Standard Efficiencyiii. Indicated thermal efficiency of the engine.
Please show system sketches and related energy flows for all problems. 1.1 Determine the electrical power supplied to a boiler when the temperature of the entering water is 20 C and the exiting temperature is 89 C. The flow of the pressured water is 2 Kg/s. There is a negligible pressure drop through this boiler and it operates at a constant pressure of 3 bars. The specific heat is c = 4,370 J/(Kg K). There is a 1.5(105 ) W rate of heat loss from the boiler during this process to a surrounding at 293.2 k. Consider steady state conditions. 1.4 Calculate the mass flowrate of fuel (natural gas, CH4) required to heat the water flow to the conditions of problem 1.1 if the electrical heating device is replaced with a gas fired boiler. The high heating value (HHV) of the fuel is 50.02 MJ/kg. 1.5 Calculate the exergy destroyed in the process described by problem 1.4. The exergy of the fuel entering this process is 51.82 MJ/Kg. The dead state temperature is 293.2 K and pressure is 1 bar. The…
A 5-feet diameter Chimney is designed to handle a flue gas produced in a steam power plant at a rate of 17 lb/s. The barometric pressure is 29.92-inch Hg. Outside air enters the combustion chamber at 90 F. The average temperature of the flue gas inside the Chimney is 572 F and its molecular weight is 30. Cv = 0.35, Rair = 53.342 ft-lb/lb-R. Calculate: 5. The total draft, feet of air. 6. The height of the Chimney, feet
Differantial Equations
A 5-feet diameter Chimney is designed to handle a flue gas produced in a steam power plant at a rate of 17 lb/s. The barometric pressure is 29.92-inch Hg. Outside air enters the combustion chamber at 90 F. The average temperature of the flue gas inside the Chimney is 572 F and its molecular weight is 30. Cv = 0.35, Rair = 53.342 ft-lb/lb-R. Calculate: a. The total draft, feet of air. b. The height of the Chimney, feet
Need help with engineering problem. Match the RTT term with its explanation: A: ddt(∫CVβρdᏉ) B: ∫CSβρVcosθdAout C: ∫CSβρVcosθdAin A. B. C. Match one of the following answers below to each letter. A change within the control volume Outflow of B from the ontrol volume Inflow of B to the control volume
Given that a particular gas has the following data:• pressure is 101.325 kPa,• temperature is 16°C, and• volume is 2.83 m³and these are compressed into a storage vessel of 0.31 m³ capacity.Before admittance, the storage vessel contained the gas has the following data:• pressure is 137.8 kPa, and• temperature is at 24°C.After admittance, the pressure has risen to 1171.8 kPa.Determine the final temperature of the gas in the vessel (in Kelvin)
What is the differential relation between displacement, velocity and acceleration?
The speed of your automobile has a huge effect on fuel consumption. Traveling at 65 miles per hour (mph) instead of 55 mph can consume almost 20% more fuel. As a general rule, for every mile per hour over 55, you lose 2% in fuel economy. For example, if your automobile gets 30 miles per gallon at 55 mph, the fuel consumption is 21 miles per gallon at 70 mph. If you take a 400-mile trip and your average speed is 80 mph rather than the posted speed limit of 70 mph, what is the extra cost of fuel if gasoline costs $4.00 per gallon? Your car gets 30 miles per gallon (mpg) at 60 mph.
In this discussion, you will briefly explain each of the four gas laws and apply an example as it happens in a refrigeration system. (Boyle’s, Charles’, Dalton’s, and the general law of perfect gases). In your contribution, also address the following: What makes matter change to different states? What type of energy do you think is the most important for the HVAC-R industry?
ENGINEERING MECHANICS II Impulse and momentum 2.) Consider the fig. below: Hint… use the law of conservation of Impulse and momentum to solve this problem