Sensotech, Inc., a maker of microelectromechanical systems, believes it can reduce product recalls by 10% if it purchases new software for detecting faulty parts. The cost of the new software is $225,000. Identify the symbols involved and the values for the symbols that are given in determining how much the company would have to save each year to recover its investment in 4 years at a minimum attractive rate of return of 15% per year.
Q: Plato Pharmaceuticals Ltd has invested £500,000 to date in developing a new type of insect…
A: Calculate the net present value as follows: a. Intrinsic value is £41,411.35 b. Change in NPV is…
Q: Turik Electronics manufactures microprocessorbased soft starters that use thyristors for controlled…
A: Equivalent annual cost is cost of the project expressed in cost per year terms, it is used to…
Q: You work for a logistics company, which considers to invest in a computerized system to improve…
A: Here, Initial cost = $90,000 Additional expenses = $25,000 Savings in operating cost = $65,000…
Q: A supermarket is planning on piloting a self-checkout system in one of its stores. It estimates that…
A: Conventional Pay back period is the time the project takes to recover initial investment in nominal…
Q: Shonda & Shonda is a company that does land surveys and engineering consulting. They have an…
A: Formula: Contribution margin = Sales price - variable cost.
Q: A machine, costing $30,000 to buy and $2.500 per year to operate, will savemainly labor expenses in…
A: Minimum required annual savings are the savings at a point where NPV is zero. This implies the point…
Q: An industrial machine costing $10,000 will produce net cash savings of $4,000 per year. The machine…
A: Sensitivity Analysis: It is possible to identify the effect of several independent variables on a…
Q: Ten years ago, the Cool Chemical Company installed a heat exchanger for $10,000. Maintenance costs…
A: The decision to replace now or not can be made based on the following approach: (A/F, i,n)
Q: Jordan Corporation is considering a new product that will be very popular for a couple of years and…
A:
Q: Your firm is thinking about investing $200,000 in the overhaul of a manufacturing cell in a lean…
A: Calculation of annual equivalent worth: Investment = $200,000 Revenues = $30,000 Expenses = $10,000…
Q: Mike made $10,000 investment in an endorser whereby he manufactures products that are easily sold at…
A: We need to determine the accumulated cost and then by using the cost per unit, we need to determine…
Q: Cushman Manufacturing Company has a five-year-old vertical numerical chucker (VNC) that has a…
A: a. The calculation of old VNC is: The formulae image is:
Q: Dinshaw Company is considering the purchase of a new machine. The invoice price of the machine is…
A: The Internal Rate of Return (IRR) is an important aspect of capital budgeting and corporate finance.…
Q: camber crporation has to decide if they can finance purchasing 10 new machines for all their…
A: All financials below are in million.Total capital expenditure = 10 machines x 1.73 / machine =…
Q: A company that manufactures a revolutionary aeration system combining coarse and fine bubble…
A: Equivalent annual cost is yearly cost of operating, maintaining and owing asset over its full life.
Q: Mikes Bike Co. currently sells 11 million bike tires each year at a price of $17 per tire. It is…
A: Given Information, Price of each tire = $17 Price of Improved tire = $23 each Cost of old tire to…
Q: Plato Pharmaceuticals Ltd has invested £500,000 to date in developing a new type of insect…
A: Sensitivity Analysis is analysis to show the change in one variable due to change in another…
Q: The sales and finance team of a car company is evaluating a new proposed luxury model of its brand…
A: Present worth computes the existing value of future benefits by discounting future worth with a…
Q: A large electronic retailer is considering the purchase of software that will minimize…
A: Net present value (NPV) is a method for assessment of financial profitability of a project. NPV is…
Q: The engineering team at Manueľ's Manufacturing, Inc., is planning to purchase an enterprise resource…
A: Present worth of investment = Present value of increase in revenue - Initial costs where. Present…
Q: Acme Inc. has invested $50,000 in a new assembly line. Products produced by the new assembly line…
A: The MARR is the minimum accepted rate of return from an investment. Given in the question: Cost of…
Q: During an executive meeting, managers are reviewing potential projects for the incoming year. A…
A: Present Worth In this method the cash flows are discounted to a single present value. MARR is used…
Q: Anderson Manufacturing Co., a small fabricator of plastics, needs to purchase an extrusion molding…
A: As per the information provided: Principal (P) = $140,000 n = 5 g = 9% or 0.09 i = 13% or 0.13
Q: Labco Scientific sells high-purity chemicals to universities, research laboratories, and…
A:
Q: Crow Corporation, a company that specializes in precision metal fabrication, is conducting a study…
A: Given information: Interest rate is 12% Number of years is 2 Cost is $260,000
Q: Walden Industries is considering investing in production−management software that costs $620,000,…
A: Accounting Rate of Return is a very easy but effective tool for…
Q: Bailey, Inc., is considering buying a new gang punch that would allow them to produce circuit boards…
A: It is a discount rate at which the net present value equal to zero.
Q: What is the internal rate of return on this investment?
A: Rate of return of a company implies the amount of money that is being returned after investing in an…
Q: Vandalay Industries is considering the purchase of a new machine for the production of latex.…
A: EAC (equivalent annual cost) is the term that can be used in many steams but it is mainly related to…
Q: Sensotech, Inc., a maker of microelectromechanical systems, believes it can reduce product recalls…
A: MARR is return that an proposal must earn to qualify for investment. Investors or Manager have…
Q: The engineering team at Manuel’s Manufacturing, Inc., is planning to purchase an enterprise resource…
A: The future worth analysis is the analysis of a project based on the future worth of a project, It is…
Q: Labco Scientific sells high-purity chemicals to universities, research laboratories, and…
A: Given: New equipment cost = $560,000 Year = 3 Interest rate = 6%
Q: The sales and finance team of a car company is evaluating a new proposed luxury model of its brand…
A: Present worth analysis is an analysis in which we convert all the cash flows to present worth using…
Q: Knight Shades Inc. is considering adding new line of sunglasses to their designer series. The…
A: Cost of Plant & Equipment : $12,000,000 Estimated life: 7 Years Depreciation per year:…
Q: The engineering team at Manuel’s Manufacturing, Inc., is planning to purchase an enterprise resource…
A: a) Computation:
Q: Thomasville Furniture Industries offers several types of high-performance fabrics that are capable…
A: The present value is the value of the sum received at time 0 or the current period. It is the value…
Q: A large electronic retailer is considering the purchase of software that will minimize shipping…
A: In the given situation, Purchase of Software has to be justified for the annual expenditure incurred…
Q: A maker of mechanical systems can reduce product recalls by 25% if it purchases new packaging…
A: Given information : Reduction rate = 25% Expected cost = $40,000 Time period = 4 years Minimum…
Q: Your fim is thinking about investing S200.000 in the overhaul of a manufacturing cell in a lean…
A: The present value is the value of the sum received at time 0 or the current period. It is the value…
Q: The engineering team at Manuel’s Manufacturing, Inc., is planning to purchase an enterprise resource…
A: Discounted Payback Period refers to a capital budgeting technique. In this method, the cash flows of…
Q: An industrial machine costing $14,000 will produce net cash savings of $5,000 per year. The machine…
A:
Q: The equivalent annual worth of an existing machine at American Semiconductor is estimated to be $…
A: Economic service life is determined by taking into attention the yearly value of options. The…
Q: The sales and finance team of a car company is evaluating a new proposed luxury model of its brand…
A: Present value: This is the amount of future value reduced or discounted at a rate of interest till…
Q: A manager has determined that a potential new product can be sold at a price of $50 each. The cost…
A: Selling Price = $50Variable Cost (Production Cost of Product) = $35Fixed Cost (Lease of necessary…
Q: The sales and finance team of a car company is evaluating a new proposed luxury model of its brand…
A: a. The calculation is: NPV is negative. Hence, the proposed investment is not a profitable…
Q: Vandalay industries is considering the purchase of a new machine for the production of latex.…
A: Equivalent annual cost (EAC) is used to compare two assets which have different life spans. It…
Sensotech, Inc., a maker of microelectromechanical systems, believes it can reduce product recalls by 10% if it purchases new software for detecting faulty parts. The cost of the new software is $225,000. Identify the symbols involved and the values for the symbols that are given in determining how much the company would have to save each year to recover its investment in 4 years at a minimum attractive
Trending now
This is a popular solution!
Step by step
Solved in 4 steps with 2 images
- Caduceus Company is considering the purchase of a new piece of factory equipment that will cost $565,000 and will generate $135,000 per year for 5 years. Calculate the IRR for this piece of equipment. For further instructions on internal rate of return In Excel, see Appendix C.Talbot Industries is considering launching a new product. The new manufacturing equipment will cost $17 million, and production and sales will require an initial $5 million investment in net operating working capital. The company’s tax rate is 25%. What is the initial investment outlay? The company spent and expensed $150,000 on research related to the new product last year. What is the initial investment outlay? Rather than build a new manufacturing facility, the company plans to install the equipment in a building it owns but is not now using. The building could be sold for $1.5 million after taxes and real estate commissions. What is the initial investment outlay?At Stardust Gems, a faux gem and jewelry company, the setting department is a bottleneck. The company is considering hiring an extra worker, whose salary will be $67,000 per year, to ease the problem. Using the extra worker, the company will be able to produce and sell 9,000 more units per year. The selling price per unit is $20. The cost per unit currently is $15.85 as shown: What is the annual financial impact of hiring the extra worker for the bottleneck process?
- Gardner Denver Company is considering the purchase of a new piece of factory equipment that will cost $420,000 and will generate $95,000 per year for 5 years. Calculate the IRR for this piece of equipment. For further Instructions on internal rate of return in Excel, see Appendix C.Talbot Industries is considering launching a new product. The new manufacturing equipment will cost 17 million, and production and sales will require an initial 5 million investment in net operating working capital. The companys tax rate is 40%. a. What is the initial investment outlay? b. The company spent and expensed 150,000 on research related to the new product last year. Would this change your answer? Explain. c. Rather than build a new manufacturing facility, the company plans to install the equipment in a building it owns but is not now using. The building could be sold for 1.5 million after taxes and real estate commissions. How would this affect your answer?Nico Parts, Inc., produces electronic products with short life cycles (of less than two years). Development has to be rapid, and the profitability of the products is tied strongly to the ability to find designs that will keep production and logistics costs low. Recently, management has also decided that post-purchase costs are important in design decisions. Last month, a proposal for a new product was presented to management. The total market was projected at 200,000 units (for the two-year period). The proposed selling price was 130 per unit. At this price, market share was expected to be 25 percent. The manufacturing and logistics costs were estimated to be 120 per unit. Upon reviewing the projected figures, Brian Metcalf, president of Nico, called in his chief design engineer, Mark Williams, and his marketing manager, Cathy McCourt. The following conversation was recorded: BRIAN: Mark, as you know, we agreed that a profit of 15 per unit is needed for this new product. Also, as I look at the projected market share, 25 percent isnt acceptable. Total profits need to be increased. Cathy, what suggestions do you have? CATHY: Simple. Decrease the selling price to 125 and we expand our market share to 35 percent. To increase total profits, however, we need some cost reductions as well. BRIAN: Youre right. However, keep in mind that I do not want to earn a profit that is less than 15 per unit. MARK: Does that 15 per unit factor in preproduction costs? You know we have already spent 100,000 on developing this product. To lower costs will require more expenditure on development. BRIAN: Good point. No, the projected cost of 120 does not include the 100,000 we have already spent. I do want a design that will provide a 15-per-unit profit, including consideration of preproduction costs. CATHY: I might mention that post-purchase costs are important as well. The current design will impose about 10 per unit for using, maintaining, and disposing our product. Thats about the same as our competitors. If we can reduce that cost to about 5 per unit by designing a better product, we could probably capture about 50 percent of the market. I have just completed a marketing survey at Marks request and have found out that the current design has two features not valued by potential customers. These two features have a projected cost of 6 per unit. However, the price consumers are willing to pay for the product is the same with or without the features. Required: 1. Calculate the target cost associated with the initial 25 percent market share. Does the initial design meet this target? Now calculate the total life-cycle profit that the current (initial) design offers (including preproduction costs). 2. Assume that the two features that are apparently not valued by consumers will be eliminated. Also assume that the selling price is lowered to 125. a. Calculate the target cost for the 125 price and 35 percent market share. b. How much more cost reduction is needed? c. What are the total life-cycle profits now projected for the new product? d. Describe the three general approaches that Nico can take to reduce the projected cost to this new target. Of the three approaches, which is likely to produce the most reduction? 3. Suppose that the Engineering Department has two new designs: Design A and Design B. Both designs eliminate the two nonvalued features. Both designs also reduce production and logistics costs by an additional 8 per unit. Design A, however, leaves post-purchase costs at 10 per unit, while Design B reduces post-purchase costs to 4 per unit. Developing and testing Design A costs an additional 150,000, while Design B costs an additional 300,000. Assuming a price of 125, calculate the total life-cycle profits under each design. Which would you choose? Explain. What if the design you chose cost an additional 500,000 instead of 150,000 or 300,000? Would this have changed your decision? 4. Refer to Requirement 3. For every extra dollar spent on preproduction activities, how much benefit was generated? What does this say about the importance of knowing the linkages between preproduction activities and later activities?
- The Rodriguez Company is considering an average-risk investment in a mineral water spring project that has an initial after-tax cost of 170,000. The project will produce 1,000 cases of mineral water per year indefinitely, starting at Year 1. The Year-1 sales price will be 138 per case, and the Year-1 cost per case will be 105. The firm is taxed at a rate of 25%. Both prices and costs are expected to rise after Year 1 at a rate of 6% per year due to inflation. The firm uses only equity, and it has a cost of capital of 15%. Assume that cash flows consist only of after-tax profits because the spring has an indefinite life and will not be depreciated. a. What is the present value of future cash flows? (Hint: The project is a growing perpetuity, so you must use the constant growth formula to find its NPV.) What is the NPV? b. Suppose that the company had forgotten to include future inflation. What would they have incorrectly calculated as the projects NPV?I know that its the thing to do, insisted Pamela Kincaid, vice president of finance for Colgate Manufacturing. If we are going to be competitive, we need to build this completely automated plant. Im not so sure, replied Bill Thomas, CEO of Colgate. The savings from labor reductions and increased productivity are only 4 million per year. The price tag for this factoryand its a small oneis 45 million. That gives a payback period of more than 11 years. Thats a long time to put the companys money at risk. Yeah, but youre overlooking the savings that well get from the increase in quality, interjected John Simpson, production manager. With this system, we can decrease our waste and our rework time significantly. Those savings are worth another million dollars per year. Another million will only cut the payback to about 9 years, retorted Bill. Ron, youre the marketing managerdo you have any insights? Well, there are other factors to consider, such as service quality and market share. I think that increasing our product quality and improving our delivery service will make us a lot more competitive. I know for a fact that two of our competitors have decided against automation. Thatll give us a shot at their customers, provided our product is of higher quality and we can deliver it faster. I estimate that itll increase our net cash benefits by another 2.4 million. Wow! Now thats impressive, Bill exclaimed, nearly convinced. The payback is now getting down to a reasonable level. I agree, said Pamela, but we do need to be sure that its a sound investment. I know that estimates for construction of the facility have gone as high as 48 million. I also know that the expected residual value, after the 20 years of service we expect to get, is 5 million. I think I had better see if this project can cover our 14% cost of capital. Now wait a minute, Pamela, Bill demanded. You know that I usually insist on a 20% rate of return, especially for a project of this magnitude. Required: 1. Compute the NPV of the project by using the original savings and investment figures. Calculate by using discount rates of 14% and 20%. Include salvage value in the computation. 2. Compute the NPV of the project using the additional benefits noted by the production and marketing managers. Also, use the original cost estimate of 45 million. Again, calculate for both possible discount rates. 3. Compute the NPV of the project using all estimates of cash flows, including the possible initial outlay of 48 million. Calculate by using discount rates of 14% and 20%. 4. CONCEPTUAL CONNECTION If you were making the decision, what would you do? Explain.A grocery store is considering the purchase of a new refrigeration unit with an Initial Investment of $412,000, and the store expects a return of $100,000 in year one, $72000 in years two and three, $65,000 in years four and five, and $38,000 in year six and beyond, what is the payback period?
- Mallette Manufacturing, Inc., produces washing machines, dryers, and dishwashers. Because of increasing competition, Mallette is considering investing in an automated manufacturing system. Since competition is most keen for dishwashers, the production process for this line has been selected for initial evaluation. The automated system for the dishwasher line would replace an existing system (purchased one year ago for 6 million). Although the existing system will be fully depreciated in nine years, it is expected to last another 10 years. The automated system would also have a useful life of 10 years. The existing system is capable of producing 100,000 dishwashers per year. Sales and production data using the existing system are provided by the Accounting Department: All cash expenses with the exception of depreciation, which is 6 per unit. The existing equipment is being depreciated using straight-line with no salvage value considered. The automated system will cost 34 million to purchase, plus an estimated 20 million in software and implementation. (Assume that all investment outlays occur at the beginning of the first year.) If the automated equipment is purchased, the old equipment can be sold for 3 million. The automated system will require fewer parts for production and will produce with less waste. Because of this, the direct material cost per unit will be reduced by 25 percent. Automation will also require fewer support activities, and as a consequence, volume-related overhead will be reduced by 4 per unit and direct fixed overhead (other than depreciation) by 17 per unit. Direct labor is reduced by 60 percent. Assume, for simplicity, that the new investment will be depreciated on a pure straight-line basis for tax purposes with no salvage value. Ignore the half-life convention. The firms cost of capital is 12 percent, but management chooses to use 20 percent as the required rate of return for evaluation of investments. The combined federal and state tax rate is 40 percent. Required: 1. Compute the net present value for the old system and the automated system. Which system would the company choose? 2. Repeat the net present value analysis of Requirement 1, using 12 percent as the discount rate. 3. Upon seeing the projected sales for the old system, the marketing manager commented: Sales of 100,000 units per year cannot be maintained in the current competitive environment for more than one year unless we buy the automated system. The automated system will allow us to compete on the basis of quality and lead time. If we keep the old system, our sales will drop by 10,000 units per year. Repeat the net present value analysis, using this new information and a 12 percent discount rate. 4. An industrial engineer for Mallette noticed that salvage value for the automated equipment had not been included in the analysis. He estimated that the equipment could be sold for 4 million at the end of 10 years. He also estimated that the equipment of the old system would have no salvage value at the end of 10 years. Repeat the net present value analysis using this information, the information in Requirement 3, and a 12 percent discount rate. 5. Given the outcomes of the previous four requirements, comment on the importance of providing accurate inputs for assessing investments in automated manufacturing systems.Each of the following scenarios is independent. All cash flows are after-tax cash flows. Required: 1. Patz Corporation is considering the purchase of a computer-aided manufacturing system. The cash benefits will be 800,000 per year. The system costs 4,000,000 and will last eight years. Compute the NPV assuming a discount rate of 10 percent. Should the company buy the new system? 2. Sterling Wetzel has just invested 270,000 in a restaurant specializing in German food. He expects to receive 43,470 per year for the next eight years. His cost of capital is 5.5 percent. Compute the internal rate of return. Did Sterling make a good decision?Manzer Enterprises is considering two independent investments: A new automated materials handling system that costs 900,000 and will produce net cash inflows of 300,000 at the end of each year for the next four years. A computer-aided manufacturing system that costs 775,000 and will produce labor savings of 400,000 and 500,000 at the end of the first year and second year, respectively. Manzer has a cost of capital of 8 percent. Required: 1. Calculate the IRR for the first investment and determine if it is acceptable or not. 2. Calculate the IRR of the second investment and comment on its acceptability. Use 12 percent as the first guess. 3. What if the cash flows for the first investment are 250,000 instead of 300,000?