Show given, complete solution, and diagram. A steam power plant operates on the Rankine Cycle. The steam enters the turbine at 7 Mpa and 550 with a velocity of 30 m/s. It discharges to the condenser at 20kpa with a velocity at 90 m/s. Calculate the net workin kw for a flow of 37.8kg/s. a. 23.23 Mw c. 34.22 Mw b. 53.34 Mw d. 46.54 Mw

Show given, complete solution, and diagram. A steam power plant operates on the Rankine Cycle. The steam enters the turbine at 7 Mpa and 550 with a velocity of 30 m/s. It discharges to the condenser at 20kpa with a velocity at 90 m/s. Calculate the net workin kw for a flow of 37.8kg/s. a. 23.23 Mw c. 34.22 Mw b. 53.34 Mw d. 46.54 Mw

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter35: Comfort And Psychrometrics

Section: Chapter Questions

Problem 12RQ: A gas furnace has an output of 60,000 Btu/h. The return air temperature is 72F, and the temperature...

See similar textbooks

Similar questions

1. In a steam power cycle, steam enters the turbine at 30bar with the following different conditions and leaves at 1bar. Calculate Carnot efficiency, Rankine efficiency, condenser heat flow in kW assuming mass flow rate of steam as 9.5kg/s and steam rate for each case considering the pump work. Using mollier diagram (ii)Wet with 0.95 dryness
DRAW DIAGRAM In a SIMPLERankine cycle, the steam throttled condition is 8 MPa and 480°C. The steam is then reheated to 2 MPa and 460 °C. If turbine exhaust is 60 °C, determine the following:a. Heat Addedb. Turbine Workc. Heat Rejectedd. Pump Worke. Net Workf. Efficiency
1. In a steam power cycle, steam enters the turbine at 30bar with the following different conditions and leaves at 1bar. Calculate Carnot efficiency, Rankine efficiency, condenser heat flow in kW assuming mass flow rate of steam as 9.5kg/s and steam rate for each case considering the pump work. (ii)Wet with 0.95 dryness (iii) Superheat at 550°C
Considering that the change in enthalpy at the first stage of a Reheat Rankine Cycle is 450 BTU/lb and 850 BTU/lb was recorded in the second stage, calculate for the thermal efficiency (in percent) of the cycle if both stages has a 93% efficiency and having a heat added of 9000 kJ/kg. (Hint: Neglect the pump work)
A power plant uses steam flowing at 75kg/s to perform power cycle. Both the turbine and the pump operate adiabatically and without irreversibilities. a) find quality at the turbine exit b) find mass flow rate (kg/s) of cooling water through the condenser c) find efficiency of the cycle d) plot the cycle on a T-s diagram, indicate the saturation curve and each state of the working fluid.
Carnot Cycle A, B, C are connected in series so that the heat rejected from A will be the heat added to B and heat rejected from B will be added to C. Each cycle operates between 303K and 4000C. If heat added to A is 1000 kW, find the work output of C, kW, nearest tenths.
Considering that the change in enthalpy at the first stage of a Reheat Rankine Cycle is 1050 kJ/kg and 850 BTU/lb was recorded in the second stage, calculate for the thermal efficiency (in percent) of the cycle if both stages has a 93% efficiency and having a heat added of 9000 kJ/kg. (Hint: Neglect the pump work)
A regenerative steam power plant uses a turbine with throttle pressure of 3.8 MPaa at 380°C and a condensing pressure at 0.01 MPaa. Steam are extracted at the following pressure: 2.0 MPaa, 1.0 MPaa, and at 0.2 MPaa. For the ideal cycle, Find Worknet in kJ/kg Find thermal efficiency in %
7. Steam at 7.2 MPa, 600OC expands in a Rankine turbine to 0.45 MPa. For 180 kg/s of steam, determine the work, the thermal efficiency, and the steam rate (a) for the cycle, (b) for the turbine with the same specifications, the brake steam is 7.40 kg/kW-h and the driven electric generator has an efficiency of 91%. (c) Find eb, nb, WK, and quality or actual exhaust steam. Please answer letter c. Thanks
Find the Rankine cycle thermal efficiency of a steam plant with the following enthalpies in KJ/kg: entering turbine: 3100, leaving turbine= 2400, entering pump= 140 leaving pump= 180.
A boiler produces a steam at 2.417 Mpa and 468.9oC. The steam enters a turbine where after the extraction of energy enters a steam condensing unit. The pressure inside the condenser is maintained at 0.1578 MPa. If the system operates on a simple Rankine cycle, solve for: a) heat added per cycle, b) heat rejected, c) cycle net work and d) the cycle thermal efficiency
A steam powerplant operates on a rankine cycle the steam enters the turbine at 7 mpa 550°c with a velocity of 3m/s . Its dischaRge to the condenser at 20kpa with the velocity of 90m/s calculate the network in kw for a flow of 37.8kg/s