5-A steam power plant operates onthe simple ideal Rankine cyclebetween the pressure limits of 10kPa and 10 MPa, with a turbine inlettemperature of 600°C. The rate ofheat transfer in the boiler is 800kJ/s. Disregarding the pump work,the power output of this plant is(a) 243 kW (b) 284 kW (c) 508kW (d) 335 kW (e) 800 kW

steam power plant operates o simple ideal Rankine cycl ween the pressure limits of 1 and 10 MPa, with a turbine inle nperature of 600°C. The rate c t transfer in the boiler is 80 s. Disregarding the pump work power output of this plant is

steam power plant operates o simple ideal Rankine cycl ween the pressure limits of 1 and 10 MPa, with a turbine inle nperature of 600°C. The rate c t transfer in the boiler is 80 s. Disregarding the pump work power output of this plant is

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

35 - In the simple ideal Rankine cycle, the enthalpy of water at the pump outlet is 230 kJ/kg. If the pressure at the turbine inlet is 9 MPa and the temperature is 400ºC, which of the following should be supplied to the water at a flow rate of 50 kg/s? a) 225.5 MW B) 199.7 MW NS) 259.1 MW D) 224.8 MW TO) 144.4 MW
5 An ideal Rankine cycle with reheat uses water as the working fluid. As shown in the figure below, the conditions at the inlet to the first turbine stage are 1600 lbf/in.2, 1200°F and the steam is reheated to a temperature of T3 = 800°F between the turbine stages at a pressure of p3 = p2 = 200 lbf/in.2 For a condenser pressure of p5 = p4 = 9 lbf/in.2, determine:(a) the quality of the steam at the second-stage turbine exit.(b) the cycle percent thermal efficiency.
8 - In a Brayton cycle using air as the working fluid, the temperature at the compressor outlet is 530 K and the turbine inlet temperature is 1000 K. Mass flow rate is 24 kg/s. Which of the following is the heat given to the air? a) 12.29 MW B) 11.5 MW NS) 13.91 MW D) 14.18 MW TO) 10.99 MW
A simple power plant utilizing the Rankine Cycle operates with an inlet boiler pressureof 5 MPa and an inlet condenser pressure of 300 kPa. Because of frictional effects, thepressure of the water drops 0.3 MPa in the boiler and 3 kPa in the condenser. Thetemperature of the steam as it enters the turbine is 700 °C. The adiabatic efficiency ofthe pump and of the turbine are 83 percent and 88 percent, respectively. The pumpand the turbine are adiabatic, and the water enters the pump as saturated liquid. It canbe assumed that heat transfer to the water in the boiler is from a reservoir at 1500 K,and the environment is at 25 °C.Determine the thermal efficiency of the cycle and compare it with the thermal efficiencyof (a) a Carnot cycle, and (b) the ideal Rankine Cycle. Specify the amount of entropygenerated in each step of the real cycle
A steam power plant operates on a simple ideal Rankine cycle between the pressure limits of3 MPa and 50 kPa. The temperature of the steam at the turbine inlet is 300°C, and the massflow rate of steam through the cycle is 35 kg/s. Show the cycle on a T-s diagram with respectto saturation lines, and determine (a) the thermal efficiency of the cycle and (b) the net poweroutput of the power plant.
A Rankine Cycle operates at a throttle pressure and temperature of 5 MPa and 450°C, respectively. The generator produces 20 MW at an efficiency of 95% while the mechanical efficiency is 97%. The actual expansion efficiency of the turbine is 85% and the pressure of the condenser is 10 kPa. Determine the theoretical engine thermal efficiency in %.
An ideal Rankine cycle operates between the pressure limits of 15,000 kPa in the boiler and 15 kPa in the condenser. If the turbine inlet temperature is 500 deg C and the cycle produces 2500 kW of net work, determine the mass flow rate of the steam in kg/s. Refer to the tables below. a. 1.993 b. 2.122 c. 1.856 d. 2.016
1.5An ideal Rankine cycle with reheat uses water as the working fluid. As shown in the figure below, the conditions at the inlet to the first turbine stage are 1600 lbf/in.2, 1200°F and the steam is reheated to a temperature of T3 = 800°F between the turbine stages at a pressure of p3 = p2 = 200 lbf/in.2 For a condenser pressure of p5 = p4 = 1 lbf/in.2, determine:(a) the quality of the steam at the second-stage turbine exit. h6≈h5+v5(p6−p5)h6≈h5+v5(p6-p5)Determine the quality of the steam at the second-stage turbine exit. x4 =(b) the cycle percent thermal efficiency.
In a Rankine cycle, the enthalpies at turbine entry and outlet are 3159 kJ/kg and 2187 kJ/kg. respectively If the specific purp work is 2 kJ/kg. What is the specific steam consumption (in kg/kWh) of the cycle based on net output ?
A gas-turbine power plant operates on the simple Brayton cycle between the pressure limits of 200 and 1500 kpa. The working fluid as air, which enters the compressor at 30C at a rate of 20 kg/s and enters at the turbine at 900k. Using variable specific heats for air and assuming a compressor isoentropic afficiency of 90 % and a turbine isentropic efficiency of 100%, determine a) the net power output, b) the back work ratio, and c) the thermal efficiency
In a simple Rankine cycle, the working fluid is water, operating at pressures between 7.5 kPa and 1750 kPa. The water vapor is in the form of saturated steam at the turbine inlet. Turbine expansion andCalculate the thermal efficiency of the cycle, assuming that the compression processes in the pump are reversible adiabatic.
A Rankine Cycle operates at a throttle pressure and temperature of 5 MPa and 450°C, respectively. The generator produces 20 MW at an efficiency of 95% while the mechanical efficiency is 97%. The actual expansion efficiency of the turbine is 85% and the pressure of the condenser is 10 kPa. Determine the mass flow rate of steam in kg/s