Subject:( Environmental Engineering 2) Question: Compute the required volume of the aeration tank, if the side water depth is to be 9536/500 ft and the tank length is to be four times it's width. Calculate the length of the tank for the following conditions. The flow to aeration tank= 900,000gpd, The primary effluent with BOD= 125 ppm, Food to microorganisms ratio= 0.4.

Subject:( Environmental Engineering 2) Question: Compute the required volume of the aeration tank, if the side water depth is to be 9536/500 ft and the tank length is to be four times it's width. Calculate the length of the tank for the following conditions. The flow to aeration tank= 900,000gpd, The primary effluent with BOD= 125 ppm, Food to microorganisms ratio= 0.4.

Solid Waste Engineering

3rd Edition

ISBN:9781305635203

Author:Worrell, William A.

Publisher:Worrell, William A.

Chapter7: Thermal Processes

Section: Chapter Questions

Problem 7.1P

See similar textbooks

Similar questions

A tank contains three liquids; kerosene (s= 0.80), crude oil (s=0.90) and sea water (s=1.05) with depths of 0.60 m, 0.40 m, 0.80 m respectively. An orifice 100 mm diameter is located at the bottom with a discharge of 29 L/s. Knowing that the diameter of tank is 1.2 meter. Determine the the time to remove both sea water and crude oil only.
Derive the Evapotranspiration (ET) in equivalent depth of water from a potted plant for a given time period under field conditions. The pot made of plastic is cylindrical of diameter D. During this period rain (R) occurred and was measured by the raingage installed nearby Percolation (P) was also measured in volume through the bottom of the pot. The pot and the plant was weighed at the beginning of the period as W1 and weighed again at the end of the period as W2. Using the water balance approach express ET as a function R, P, W1, W2 and D for the Day
An Engineer in charge of a reservoir has to release water from it for being picked at a distance of 50m km d/s side. The average width of the stream is 40m. The mean daily class A pan evaporation for that season is 0.5 m. estimate the mean daily evaporation loss to be considered by the engineer in releasing water in Ha-m. Take Cp= 0.7.why has the engineer taken note of evaporation and its measurement.
A conventional activated-sludge system treats 11,000 m3/day of wastewaterin an aeration tank with a volume of 3400 m3. The BOD after primary clarification is 180mg/l. Given the operation conditions below, calculate the sludge residence timeMLVSS in the rector = 2,100 mg/lMLSS = (1.25)*MLVSSQw = 160 m3/daySVI = 125 mL/g (Ans. SRT = 7.0 days)
A filter press with an effective filtering area between 350m^2 operates constantly maintaining a pressure difference of 35000Pa. The viscosity of the fluid (water with milk solids) was measured at 0.002Kg/Ms and the following data is obtained: (Data image) Considering that the density of milk solids on average is 200Kg/m^2, calculate filtration velocity at t=120m . I need help with this one plz
A filter press with an effective filtering area between 350m^2 operates constantly maintaining a pressure difference of 35000Pa. The viscosity of the fluid (water with milk solids) was measured at 0.002Kg/Ms and the following data is obtained: (Data image) Considering that the density of milk solids on average is 200Kg/m^2, calculate filtration velocity at t=120m
A water treatment plant is being designed to process 50000m3/day of water. Jar testing indicate that an alum dosage of 40mg/l with flocculation at a Gt value of 2×104 produces optimal results at the expected water temperature of 150c . Determine: ØThe monthly alum requirement for the treatment plant ØVolume of the flocculation basin. ØThe power requirement ØProjected area of paddle blades [Take absolute viscosity at 150c to be 1.139 ×10-3 Ns/m2 (Assume Vp 0.5m/s, CD 1.8) ]
A- A pan diameter 1.22m was set up adjacent to a lake. The 4.75 liters removed from pan aŌer rainfall occur with intensity 8.8 mm. calculate the evaporaƟon depth in pan.
12.28 Determine the NRC BOD removal efficiency for a two stage trickling filter plant based on the following: primary clarification with 35% BOD reduction, first stage filters loaded at 80 lb/1000ft3/day, intermediate settling, second stage filters sized identical to the first stage units, an operating recirculation ration of 1.0 for all the filters, final clarification of the effluent, and a waste water temperature of 18 c
Calculate the minimum fluidization velocity for an anthracite bed having following characteristics; d90 = 2.9 mm, ?anthracite = 1600 kg/m3, ?water = 998 kg/m3 at 20°C; µ = 1.002x 10-3 kg/m.sec
Find the collecting plate area of a horizontal-flow, single-stage electrostatic precipitator handling an average gas flow of 2.5 m3/s from a pulverized coal-fired boiler. The required collection efficiency of ESP is 98%.
A closed tank contains liquified butane gas whose specific gravity is 0.60. The tank pressure is 1.7 Mpa gage which is also the equilibrium vapor pressure of butane at the pumping temperature. Suction lines losses is 1.5m of gas and the static elevation gain is 4m. What is the NET POSITIVE SUCTION HEAD AVAILABLE?(NPSHa)