Suppose a spring-mass system is on a table retarded by a Coulomb frictional force (equation 10.3): dx Y if dt d²x m- + kx = Ff, where F; dx ny if > 0. dt (a) If dx/dt > 0, determine the energy equation. Sketch the resulting phase plane curves. [Hint: By completing the square show that the phase plane curves are ellipses centered at v = =0.] 0, x = -y/k; not centered at (b) If dx/dt < 0, repeat the calculation of part (a). [Hint: The ellipses now are centered at v 0, x = = ylk.] (c) Using the results of (a) and (b), sketch the solution in the phase plane. Show that the mass stops in a finite time!!! (d) Consider a problem in which the mass is initially at x = vo. Determine how many times the mass passes x = 0 as a function of O with velocity vo.

Suppose a spring-mass system is on a table retarded by a Coulomb frictional force (equation 10.3): dx Y if dt d²x m- + kx = Ff, where F; dx ny if > 0. dt (a) If dx/dt > 0, determine the energy equation. Sketch the resulting phase plane curves. [Hint: By completing the square show that the phase plane curves are ellipses centered at v = =0.] 0, x = -y/k; not centered at (b) If dx/dt < 0, repeat the calculation of part (a). [Hint: The ellipses now are centered at v 0, x = = ylk.] (c) Using the results of (a) and (b), sketch the solution in the phase plane. Show that the mass stops in a finite time!!! (d) Consider a problem in which the mass is initially at x = vo. Determine how many times the mass passes x = 0 as a function of O with velocity vo.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Write and compare the equation of mechanical and electrical SHO? And a mass stand in floor which execute SHM vertically at 5hz frequency .show that mass losses contact with floor if displacement exceed 1 cm.?
A washing machine has 60 kg mass, and 15 cm tub radius. Machine dries the unbalanced3 kg laundry by rotating with 1000 rpm.a) What would be the dynamic force transmitted to the foundation if there is no vibrationisolation for the machine?b) An isolation with damping ratio 0.1 is applied to the machine. In this case, if thetransmitted force is decreased by 90 % what would be the natural frequency of the machine?c) In this case, what would be the vibration amplitude of the machine?
How is constant amplitude sustained in forced oscillations?
An underdamped shock absorber is to be designed for a motor cycle of mass 200 kg(m). When the shock absorber is subjected to an initial vertical velocity due to a road bump, the resulting displacement-time curve is to be as indicated below. Find the necessary stiffness and damping constants of the shock absorber if the damped period of vibration is to be 10 sec(τd) and the amplitude x1is to be reduced to one-tenth in one half cycle. Example is attached
A reciprocating machine weighing 100kN is known to develop vertically oriented harmonic forces having and amplitude of 2.5kN at its operating speed of 40Hz. In order to limit the vibrations excited in the building in which the machine is installed, it is to be supported by a spring at each corner of its rectangular base. The designer wants to know what support spring stiffness would be required to limit to 0.4kN, the total harmonic force transmitted from the machine to the building.
If stiffness of a spring is doubled and mass is halved, what will be percent change in its natural frequency?
Question 1 Define how resonance occurs in a dynamic system? What must you take into account from preventing this from occurring? Finally, design a simple mass-spring-damper, indicate the values of the system, and provide an equation where the system is in a resonant state.
A washing machine with a mass of 60 kg and a drum radius of 15 cm, rotates at 1000 rpm and washes 3 kg of unbalanced laundry. a) How much dynamic force would be transmitted to the ground if no vibration isolation was taken from the machine?b) What would be the stiffness (k) of the visco-elastic floor if an insulation measure with a damping ratio of 0.1 was taken, which would reduce the force transmitted to the floor by 90%?
pleassssse solve question 9, statics
Mechanical Vibrations Question is image A 300-kg machine is attached to an elastic foundation of stiffness 3.1 x E6 N/m and damping ratio 0.06. When excited by a frequency squared excitation at very large speeds, the machine's steady-state amplitude is 10 mm. What is the maximum steady-state amplitude the machine would experience at lower speeds?
design a simple mass-spring-damper, indicate the values of the system, and provide an equation where the system is in a resonant state.
Question1B Finally, design a simple mass-spring-damper, indicate the values of the system, and provide an equation where the system is in a resonant state.