The 55-kg cylinder is suspended from a clamping collar at C which can be positioned at any horizontal position x between the fixed supports at A and B. The cable is 9 m in length. Determine and plot the tensions in cable segments AC and BC as a function of x over the interval 0≤x≤7. Do your plot on a separate piece of paper. Then answer the questions to check your results.(You can disregard the plot, I only need the answer for the given x value) The 55-kg cylinder is suspended from a clamping collar at C which can be positioned at any horizontal position x between the fixedsupports at A and B. The cable is 9 m in length. Determine and plot the tensions in cable segments AC and BC as a function of x over theinterval 0 < x < 7. Do your plot on a separate piece of paper. Then answer the questions to check your results.7 mAB55 kgQuestions:(a) If x = 1.3 m, the tension in cable AC isiN(b) If x = 4.3 m, the tension in cable BC isiN

a) First let us calculate the height (h) as shown in figure - 9-y2 = 5.72 + h2y2 = 1.32 + h2Solving…

The 55-kg cylinder is suspended from a clamping collar at C which can be positioned at any horizontal position x between the fixed supports at A and B. The cable is 9 m in length. Determine and plot the tensions in cable segments AC and BC as a function of x over the interval 0 < x<7. Do your plot on a separate piece of paper. Then answer the questions to check your results. 7 m A 55 kg Questions: (a) If x = 1.3 m, the tension in cable AC is i N (b) If x = 4.3 m, the tension in cable BC is i N

The 55-kg cylinder is suspended from a clamping collar at C which can be positioned at any horizontal position x between the fixed supports at A and B. The cable is 9 m in length. Determine and plot the tensions in cable segments AC and BC as a function of x over the interval 0 < x<7. Do your plot on a separate piece of paper. Then answer the questions to check your results. 7 m A 55 kg Questions: (a) If x = 1.3 m, the tension in cable AC is i N (b) If x = 4.3 m, the tension in cable BC is i N

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter4: Coplanar Equilibrium Analysis

Section: Chapter Questions

Problem 4.84P: The pulley-cable system supports the 150-lb weight. The weights of the pulleys and the horizontal...

See similar textbooks

Similar questions

The 55-kg cylinder is suspended from a clamping collar at C which can be positioned at any horizontal position x between the fixed supports at A and B. The cable is 14 m in length. Determine and plot the tensions in cable segments AC and BC as a function of x over the interval 0≤x≤13. Do your plot on a separate piece of paper. Then answer the questions to check your results.
The 355.8 N homogeneous plate is suspended from four wires. Determine the tension in each wires.
The 355.8-N homogeneous plate is suspended from four wires. Determine the tension in each wire.
For the spring assemblage shown below, determine the displacement at node 2 and the forces in each spring element. Also determine the force F3. Given: Node 3 displaces an amount 8 = 12.5 mm in the positive x direction because of the force F3 and k1 k2 175 kN/m.
in the pulley system and the diagram above, assume that the bearings at oh and C are properly aligned and smooth and that T2 =30 N all dimensions in millimeters and the belt tensions are all tangential to the pulleys a. If the shaft runs at a constant speed, determine the tension T1 b draw a free body diagram of the shaft and determine the reactions at bearing sea in terms of the components along the Y and Z axis. Assume neither bearing and oh or see produces an axial thrust
ابحثوا بالملفات Q1 :Determine the tensions T₁ and T₂ in the ropes AB and CD as shown in the below Figure that were used to support a machine component has long 3 m and weight 2500 N, then discuss your results.
PROBLEM 3: A pole AB is being lifted using cables BC and BD. The pole is tilted at an angle of 60⁰ from the horizontal (from xy-plane) and the tensions in BC and BD are 26.1 and 11.3 kN, respectively. [7] Determine the coordinates of B. Answer format: (x, y, z) (ANSWER: 6.00, 0.00, 10.39 m) [8] Calculate the magnitude of the resultant of the two tensions BC and BD acting at B. (ANSWER: 36.04 KN) [9] Calculate the directional angle of the resultant of tensions BC and BD acting at B with respect to the z-axis (γ). (ANSWER: 135.969⁰) and with respect to the y-axis (β). (ANSWER: 103.611⁰).
The system is made up of a bar, supported by a pin at point A and by a smooth collar at point B (the collar slides on the ABG bar). The collar is pinned to bar BDE, and bar BDE is supported by a pin at D and a cable at end E. Determine the force P such that the force in the cable equals to T. With T= 26 lb, a=4 in, b=9 in
1. A museum of modern art is displaying an irregular 426-N sculpture by hanging it from two thin vertical wires, A and B, that are 1.25 m apart. The center of gravity of this piece of art is 48.0 cm from its extreme right tip. a). Find the tension in each wire. Show the step by step and complete solution. Draw also the complete FBD (as seen in the figure).
Two cables are tied together at C and support a 200 kg mass. Determine the tensions in cables CA and CB, also include a free body diagram.
Determine the tensions T1 and T2 in the strings required to maintain equilibrium for the suspended object weighs W = 38.7N shown in the figure. Take, α = 29.8° & β = 50.2°. The value of θ1 (Degree) = The value of θ2 (Degree) = The value of θ3 (Degree) =
A sign that weighs 15.0 N hangs from the end of a beam of length 4 meters and weight 10 Newtons. Beam is hinged at the wall and supported by a cable attached to the beam 3.00 meters from the wall as shown. Determine the tension in the cable. Determine the x- and y-components of the reaction force at the hinge. (3 total answers)