The cylindrical pipe with a thread diameter of 0.070 m and an internal diameter of 0.050 m is insulated both internally and externally. Calculate the heat loss per unit length of the pipe (1 m) when the inner surface temperature of the pipe is kept at 50 °C and the outer surface temperature at 20 °C (Average thermal conductivity constant =

The cylindrical pipe with a thread diameter of 0.070 m and an internal diameter of 0.050 m is insulated both internally and externally. Calculate the heat loss per unit length of the pipe (1 m) when the inner surface temperature of the pipe is kept at 50 °C and the outer surface temperature at 20 °C (Average thermal conductivity constant =

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter8: Natural Convection

Section: Chapter Questions

Problem 8.8P

See similar textbooks

Similar questions

To maximize production and minimize pumping costs, crude oil is heated to reduce its viscosity during transportation from a production field. (1) Consider a pipe-in-pipe configuration consisting of concentric steel tubes with an intervening insulating material. The inner tube is used to transport warm crude oil through cold ocean water. The inner steel pipe ( ks = 40 W/m·K) has an inside diameter of Di,1 = 150 mm and wall thickness ti = 20 mm while the outer steel pipe has an inside diameter of Di,1 = 250 mm and wall thickness . Determine the maximum allowable crude oil temperature to ensure the polyurethane foam insulation ( kp = 0.0425 W/m·K) provides an external convection heat transfer coefficient of ho = 500 W/m2·K. The convection coefficient associated with the flowing crude oil is hi = 450 W/m2·K. (2) It is proposed to enhance the performance of the pipe-in-pipe device by replacing a thin ( ta =10 mm) section of polyurethane located at the outside of the inner pipe with an…
To maximize production and minimize pumping costs, crude oil is heated to reduce its viscosity during transportation from a production field. (1) Consider a pipe-in-pipe configuration consisting of concentric steel tubes with an intervening insulating material. The inner tube is used to transport warm crude oil through cold ocean water. The inner steel pipe (ks= 40 W/m·K) has an inside diameter of Di, 1= 150 mm and wall thickness ti= 20 mm while the outer steel pipe has an inside diameter of Di, 2= 250 mm and wall thickness to=ti. Determine the maximum allowable crude oil temperature to ensure the polyurethane foam insulation (kp= 0.0675 W/m·K) between the two pipes does not exceed its maximum service temperature of Tp, max= 70°C. The ocean water is at ∞ T∞, o= -5°C and provides an external convection heat transfer coefficient of ho= 500 W/m2·K. The convection coefficient associated with the flowing crude oil is hi= 450 W/m2·K. (2) It is proposed to enhance the performance of the…
To maximize production and minimize pumping costs, crude oil is heated to reduce its viscosity during transportation from a production field. (1) Consider a pipe-in-pipe configuration consisting of concentric steel tubes with an intervening insulating material. The inner tube is used to transport warm crude oil through cold ocean water. The inner steel pipe (ks= 40 W/m·K) has an inside diameter of Di, 1= 150 mm and wall thickness ti= 20 mm while the outer steel pipe has an inside diameter of Di, 2= 250 mm and wall thickness to=ti. Determine the maximum allowable crude oil temperature to ensure the polyurethane foam insulation (kp= 0.0675 W/m·K) between the two pipes does not exceed its maximum service temperature of Tp, max= 70°C. The ocean water is at ∞ T∞, o= -5°C and provides an external convection heat transfer coefficient of ho= 500 W/m2·K. The convection coefficient associated with the flowing crude oil is hi= 450 W/m2·K. (2) It is proposed to enhance the performance of the…
Fins, or extended surfaces, commonly are used in a variety of engineering applications to enhance cooling. Common examples include a motorcycle engine head, a lawn mower engine head, extended surfaces used in electronic equipment, and finned tube heat exchangers in room heating and cooling applications. Consider aluminum fins of a rectangular profile, which are used to remove heat from a surface whose temperature is100° C . The temperature of the ambient air is 20° C. We are interested in determining how the temperature of the fin varies along its length and plotting this temperature variation. For long fins, the temperaturedistribution along the fin is given by
A horizontal pipe having a surface temperature of 67 °C and diameter of 20 cm is buried at a depth of 1 m in the earth at a location where k = 1.8 W/m-°C. The earth surface temperature is 15 °C. Calculate the shape factor if the pipe length is 10 m.
In a steel tube (thermal conductivity λ=52.9 W/mK , internal diameter di=(=0.098-0.006} m, external diameter =0.098 m), with an internal surface temperature of ϑi=21.4°C and with the external surface temperature of ϑe=55.3°C, calculate the temperature in the radius r=0.04714 m.
A 10 ft length of pipe with an inner radius of 1 in and outer radius of 1.25 in has an outer surface temperature of 250 F. The heat transfer rate is 30,000 BTU/hr. Find the interior surface temperature. Assume k = 25 BTU/hr-ft-F.
Steam at a temperature of 723 K is flowing through a pipe with an outer diameter of 100 mm. The pipe is insulated with 30-mm thick mineral wool, the average thermal conductivity of which is 0.065 W/m.K. Determine the outside surface temperature of mineral wool if the ambient air temperature is 300 Assume the hot-surface temperature of the mineral wool is the same as that of the flowing steam and the value of the surface coefficient of the insulating material is 33 W/m2.K.
A coil-shaped cooling pipe is made of SS-304 material. This pipe is 1 ft long, 0.4 inch outside diameter, and inch inside diameter. This coil cooling pipe is used to cool the water in the bath. The temperature of the inner coil pipe is 40oF while the outer coil in contact with water is 80oF. The thermal conductivity of SS-304 is a function of temperature where k(T) = 7.75 + (7.78 x 10-3).T where k is in Btu/h.ft.oF and T is in oF. Calculate the rate of heat dissipation in watts! (1287.7)
Consider a closed cylindrical reactor vessel of diameter D= 1 ft, and length L= 1.5 ft. The surface temperature of the vessel, T1, and the surrounding temperature, T2, are 390 deg. F and 50 deg. F, respectively. The convective heat transfer coefficient, h, between the vessel wall and surrounding fluid is 4.0 Btu/h . ft . ⁰F. Calculate the thermal resistance in ⁰F .h/Btu.
A steel pipe 150mm diameter conveys steam at a temperature of 260 degrees and is covered by two layers of lagging, each 50mm thick. The thermal conductivity coefficient of the inside layer of lagging is 0.086W/m.K while that of the outside layer is 0.055W/m.K. The outside surface temperature of the steel pipe can be taken as the same as the temperature of the system. The ambient temperature is 27 degrees. Calculate the heat lost per hour for pipe length 30m. Calculate the interface temperature between the two layers of lagging
Can u continue the question 5 to 7 5. Calculate the change in heat energy of the submarine’s outer haul, when it descends from the surface to a depth of 3,500m (with an average temperature of 20°C). 6. Calculate the power of the submarine’s electrical heater needed, to maintain the interior of outer hull at 30°C. The exterior of outer hull is 10°C. (Assume heat of the submarine is only lost across the outer hull) 7. Suggest aerospace applications of ballast.