The device shown is a simplified model of an amusement-park ride in which passengers are rotated about the vertical axis of the central post at an angular speed Q while sitting in a pod which is capable of rotating the occupants 360° about the longitudinal axis of the connecting arm attached to the central collar. Determine the percent increase n in angular velocity between configurations (a) and (b), where the passenger pod has rotated 90° about the connecting arm. For the model, m = 1.7 kg, r = 65 mm, I = 255 mm, and L = 600 mm. The post and connecting arms rotate freely about the z-axis at an initial angular speed Q = 135 rev/min and have a combined mass moment of inertia about the z-axis of 33(10-3) kg m2.

The device shown is a simplified model of an amusement-park ride in which passengers are rotated about the vertical axis of the central post at an angular speed Q while sitting in a pod which is capable of rotating the occupants 360° about the longitudinal axis of the connecting arm attached to the central collar. Determine the percent increase n in angular velocity between configurations (a) and (b), where the passenger pod has rotated 90° about the connecting arm. For the model, m = 1.7 kg, r = 65 mm, I = 255 mm, and L = 600 mm. The post and connecting arms rotate freely about the z-axis at an initial angular speed Q = 135 rev/min and have a combined mass moment of inertia about the z-axis of 33(10-3) kg m2.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The spring-mounted 0.89-kg collar A oscillates along the horizontal rod, which is rotating at the constant angular rate θ˙=8.2θ˙=8.2 rad/s. At a certain instant, r is increasing at the rate of 700 mm/s. If the coefficient of kinetic friction between the collar and the rod is 0.63, calculate the friction force F exerted by the rod on the collar at this instant.
The spring-mounted 0.8 kg collar A oscillates along the horizontal rod, which is rotating at the constant rate q = 6 rad/sec. The spring constant k equals 5 N /m and the coefficient of kinetic friction mk equals 0.4. At a certain instant, r = 0.2 m, which is increasing at the rate of 800 mm/s, while r = 0.3 m / s2. For this instant, calculate the friction force from the rod onto the collar and the elastic force on the collar. Indicate whether or not the elastic force points towards the origin O and then calculate the spring stretch. (Hint: the total normal force between the rod and the collar results from both the weight of the collar and the transverse normal force that is perpendicular to the rod on the plane of rotation of the rod.) PLEASE ANSWER ALL QUESTIONS!
Assuming that the tail propeller in Prob. 17.84 is operating and that the angular velocity of the cab remains zero, determine the final horizontal velocity of the cab when the speed of the main blades is changed from 180 to 240 rpm. The cab weighs 1250 lb and is initially at rest. Also, determine the force exerted by the tail propeller if the change in speed takes place uniformly in 12 s.
The uniform 140-lblb beam is initially at rest when the forces are applied to the cables. Set FAFAF_A = 70 lblb and FBFBF_B = 190 lblb .(Figure 1) Determine the magnitude of the acceleration of the mass center at this instant. Determine the angular acceleration of the beam at this instant.
A Porter governor has equal arms each 250 mm long and pivoted on the axis of rotation. Each flyball has a mass of 10 kg and the mass of the central load on the sleeve is 50 kg. The radius of rotation of the flyball is 150 mm when the governor begins to lift and 200 mm when the governor is at maximum speed. Find the range of speed, when the friction at the sleeve is neglected. Select one: A. 35.4 rpm B. 25.4 rpm C. 15.4 rpm D. 45.4 rpm
The radius of the flywheel given in the figure is 600 mm. The radius of rotation (inertia) of the flywheel, which has a mass of 144 kg, is 450 mm. Object A with a mass of 18 kg is hanged with a rope wrapped around the flywheel. When the system is released from its still (still) state. Find the acceleration and velocity of the m block when the object A moves down 1.8 meters
From the given figure, A circular disk of a radius R rolls without slipping at a velocity V. Determine the magnitude of the velocity at point P.
The arms of a Porter governor are each 250 mm long and pivoted on the governor axis. The mass of each ball is 5 kg and the mass of the central sleeve is 30 kg. The radius of rotation of the balls is 150 mm when the sleeve begins to rise and reaches to certain radius at maximum speed. The governor has radius that is 175 mm at mid position. The speed range of the governor is 38 rpm, and the increment in speeds is constant in the three positions. Find : (1) the friction of the load which existed at the sleeve, and (2) the governor radius at maximum speed. The friction is ignore in mid position only.
b) Find the angular velocity and angular acceleration of disc B shown below, which is spinningatthe constant rate of ω2 = 90/πrpm. The disc is attached to collar A, which is rotating at the angular speed of ω1 = 5/π rpm, with the angular speed increasing at 0.5/π rpm/sec. Rod AB which connects the disc to the collar ispinned to the collar at A. The rod makes an angle of θ = 300 with the vertical, which is increasing at a constant rate of20/π0/sec.Express theAngularvelocityAcceleration of the disc in terms of a reference frame attached to thecollar.
A spool of mass 60 kg is supported on two rollers at A and B as shown in FigureQ1(c). Neglect the mass of the inelastic cable, friction and the mass of therollers at A and B. Knowing that a constant pulling force P is applied in order tounwind 6 m of cable in 3 s starting from rest. The radius of gyration for the spoolis (604) mm, Appendix Ashows the examples of identifying the radius of gyration using student ID.(i) Determine the angular acceleration of the spool. (ii) Determine the pulling force P. (iii) Explain with calculation on ways to increase the acceleration of cablebeing pulled. [
Attached to the rope of length R = 0.5m, the object with mass m = 1kg is rotated clockwise in a vertical plane. Object; The linear speed is 2m / s when it is at point A in the first second, and when the linear speed is 8m / s when it is at point B in the second second, the theta = 127 degrees between A and B is swept. a) Calculate the tensile forces on the rope while the object is at A and B points. b) Calculate the total acceleration vectorially when the object is at point A. (g=10m/s^2, sin37=0.6 and cos37=0.8)
A car and its load weighs 27 kN and the center of gravity is 600 mm from the ground and midway between the front and rear wheel which are 3 m apart. The car is brought to rest from a speed of 54 kph in 5 seconds by means of the brakes. Compute the normal force on each of the front wheels of the car.