The femur of a human leg (mass 10 kg, length 0.9 m) is in traction, as shown in the figure. The center of gravity of the leg is one-third of the distance from the pelvis to the bottom of the foot. Two objects, with masses m, and m2, m m. are hung at the ends of the leg using pulleys to provide upward support. A third object of 8 kg is hung to provide tension along the leg. The body provides tension as well. Write a mathematical relationship relating m1 to m2 in terms of m2 and numerical coefficients. 8 kg = lu

The femur of a human leg (mass 10 kg, length 0.9 m) is in traction, as shown in the figure. The center of gravity of the leg is one-third of the distance from the pelvis to the bottom of the foot. Two objects, with masses m, and m2, m m. are hung at the ends of the leg using pulleys to provide upward support. A third object of 8 kg is hung to provide tension along the leg. The body provides tension as well. Write a mathematical relationship relating m1 to m2 in terms of m2 and numerical coefficients. 8 kg = lu

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter10: Rotational Motion

Section: Chapter Questions

Problem 79P

See similar textbooks

Similar questions

A wooden door 2.1 m high and 0.90 m wide is hung by two hinges 1.8 m apart. The lower hinge is 15 cm above the bottom of the door. The center of mass of the door is at its geometric center, and the weight of the door is 260 N, which is supported equally by both hinges. Find the horizontal force exerted by each hinge on the door.
In Figure 9.21, the cg of the pole held by the pole vaulter is 2.00 m from the left hand, and the hands are 0.700 m apart. Calculate the force exerted by (a) his right hand and (b) his left hand. (c) If each hand supports half the weight of the pole in Figure 9.19, show that the second condition for equilibrium (net =0 ) is satisfied for a pivot other than the one located at the center of gravity of the pole. Explicitly show how you follow the steps in the Problem-Solving Strategy for static equilibrium described above. Figure 9.21 A pole vaulter is holding a pole horizontally with both hands. The center of gravity is to the left side of the vaulter.
A stepladder of negligible weight is constructed as shown in Figure P10.73, with AC = BC = ℓ. A painter of mass m stands on the ladder a distance d from the bottom. Assuming the floor is frictionless, find (a) the tension in the horizontal bar DE connecting the two halves of the ladder, (b) the normal forces at A and B, and (c) the components of the reaction force at the single hinge C that the left half of the ladder exerts on the right half. Suggestion: Treat the ladder as a single object, but also treat each half of the ladder separately. Figure P10.73 Problems 73 and 74.
In order to get his car out of the mud, a man ties one end of a rope to the front bumper and the other end to a tee 15 m away as shown below. He then pulls on the center of the rope with a force of 400 N, which causes its center to be displaced 0.30 m, as shown. What is the force of the rope on the car?
A person carries a plank of wood 2.00 m long with one hand pushing down on it at one end with a force F1 and the other hand holding it up at .500 m from the end of the plank with force F2. If the plank has a mass of 20.0 kg and its center of gravity is at the middle of the plank, what are the magnitudes of the forces F1 and F2?
What three factors affect the torque created by a force relative to a specific pivot point?
Check your Understanding Repeat Example 12.3 using the left end of the meter stick to calculate the torques; that is by placing the pivot at the left end of the meter stick.
Check Your Understanding Solve Example 12.1 by choosing the pivot at the location of the rear axle.
When tightening a bolt, you push perpendicularly on a wrench with a force of 165 N at a distance of 0.140 m from the center of the bolt. How much torque are you exerting in newton-meters (relative to the center of the bolt)?
A 70 kg man’s arm, including the hand, can be modeled as a 75-cm-long uniform cylinder with a mass of 3.5 kg. In raising both his arms, from hanging down to straight up, by how much does he raise his center of gravity?
the horizontal arm is composed of 3 parts. the upper arm weight is 17.5N and the distance from the shoulder joint is o m. the lower arm weight is 10 N and the distance from the shoulder is 0.37m. the hand wegth is 3.80 N and the distant from the shoulder is 0.58. find the center of gravity of the entire arm relative to the shoulder joint?
An irregularly shaped object 10 m long is placed with each end on a scale. If thescale on the right reads 69 N and the scale on the left reads 93 N, how far fromthe left is the center of gravity.A) 4.3 m, B) 13 m, C) 7.4 m, D) 5.7 m