The field storage tank is filled with oil. The standpipe isconnected to the tank at C' and open to theatmosphere at E. Suppose that h1 = 9 ft , h2 = 4 ft,h3 = 8 ft . The oil has a density ofPo = 1.78 slug/ft³. Assume that there is no air trappedin the tank, that the top of the tank at B is closed.(Figure 1)Figure1 of 1B4 ftEhịFh3Ch2ADetermine the maximum gage pressure that can be developed in the tank.Express your answer to three significant figures and include the appropriate units.Where does this maximum pressure occur?O Level AO Level BO Level CO Level DO Level E

Name: The field storage tank is filled with oil. The standpipe isconnected
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: The field storage tank is filled with oil. The standpipe isconnected to the tank at C' and open to theatmosphere at E. Suppose that h1 = 9 ft , h2 = 4 ft,h3 = 8 ft . The oil has a density ofPo = 1.78 slug/ft³. Assume that there is no air trappedin t

Engineering

Mechanical Engineering

The field storage tank is filled with oil. The standpipe is connected to the tank at C and open to the atmosphere at E. Suppose that h = 9 ft , h2 = 4 ft, h3 = 8 ft . The oil has a density of po = 1.78 slug/ft³. Assume that there is no air trapped in the tank, that the top of the tank at B is closed. (Figure 1) Figure 1 of 1 В 4 ft E hi F h3 C h2 Determine the maximum gage pressure that can be developed in the tank. Express your answer to three significant figures and include the appropriate units. Where does this maximum pressure occur? O Level A O Level B O Level C O Level D O Level E

The field storage tank is filled with oil. The standpipe is connected to the tank at C and open to the atmosphere at E. Suppose that h = 9 ft , h2 = 4 ft, h3 = 8 ft . The oil has a density of po = 1.78 slug/ft³. Assume that there is no air trapped in the tank, that the top of the tank at B is closed. (Figure 1) Figure 1 of 1 В 4 ft E hi F h3 C h2 Determine the maximum gage pressure that can be developed in the tank. Express your answer to three significant figures and include the appropriate units. Where does this maximum pressure occur? O Level A O Level B O Level C O Level D O Level E

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

The submerged sector gate AB shown in the figure is 1/9 of a circle of radius 4 m. The length of the gate is 10 m. Determine the horizontal component of water pressure acting on the gate.
In Fig.= both the tank and the tube are open to theatmosphere. If L = 2.13 m, what is the angle of tilt θ of thetube?
Find the capillary raise of the water in the tube of diameter 6mm, which is immersed vertically in the container. The surface tension of water is 0.07115 N/m. Take the angle of contact is = 00 The capillary raise of water in the tube is (unit in mm)= ______
A compressed air tank is designed to contain 50 standard cubic feet of air when filled to a gaugepressure of 200 atm at an ambient temperature of 70 F. Assume this is an air tank for scubadiving, and that the approximate shape of the tank is a cylinder with circular cross section. The interior volume of the tank is v=0.253 ft^3(a) If the interior length of the cylinder is 1 ft, what would be the inner diameter?(b) It is desired that the air tank be neutrally buoyant when empty. The density of aluminum is2700 kg/m3. If the tank is made of aluminum, what should be the wall thickness in order forit to be neutrally buoyant?
A cylindrical tank contains 1.0m of mercury (SG-13.6) and 3.0m of water. To look into the tank. a viewport measuring 0.60m by 0.60m was installed 0.60m above the base of the tank as shown in the figure. (a) using the pressure prism concept. determine the total force (in kN) acting on the view port due to water. (b) using the pressure prism concept. determine the total force (in kN) acting on the view port due to mercury. (c) What is the total force acting on the view port in KN? (The total force acting on the view point is equal to the sum of the component forces due water and mercury.)
The pipe (0-1-2) shown in the …gure is angled upward at 30 and is …lled with water. The distance from (1) to (2) (along the pipe) is 1.2 m. The manometer liquid is mercury. For part (a), the pipe is capped at location (0) so that the water is stationary in the pipe. What would be the value of h in this case? For part (b), the pipe shown is just a section of a much longer pipe, and water is ‡owing upwards from (0) to (1) to (2). If the pressure loss due to friction from location (1) to location(2) is 20 kPa, what is the value of h in this case?
Find the total pressure on a circular plate of diameter 1.5 m which is placed vertically in water in such a way that the centre of the plate is 3 m below the free surface of water.
A cylindrical tank of 1.5 m diameter and height 0,75 m has a hemispherical dome. The tank contains oil of relative density 0.84. The dame is joined to cylinder position by four equally spaced bolts. If pressure gauge at point M, 0.3 m above base of tank read 50 kPa. Determine force each bolt.
A ship of displacement 36000 tonne carries oil fuel in four tanks 16.0 m long and 6.0 m broad, the tanks arranged with their length in the fore and aft direction. The specific gravity of the oil is 0.84, and the density of seawater inwhich the ship is floating is 1020 kgm-3. For a ship of this size, the metacentric height is at least 500 mm. What is the reduction of the metacentric height of the ship because of the oil that is contained in the tanks and how serious is this reduction? Please discuss further your conclusions.
The rectangular gate is hinged at point H as seen in Figure 1. The width of the gate, w is 3 m and isperpendicular to the figure plane. Determine the force, F exerted against the gate at point A for theequilibrium condition shown in the figure. The density of the water is 1000 kg/m3. The gravitationalacceleration is 9.81 N/kg
Two capillary tubes with 4mm and 2mm inside diameters were inserted into a liquid of density 1.12gcm^-3. Calculate the surface tension of the liquid if the difference between the capillary rises in the tubes is 2cm. Assume contact angle Is zero.
Note: Please state what formula you are using. And please be clear and detailed with your solution. Atleast explain. It will help me, thanks. Problem: A Triangular gate having a horizontal base of 1.30 m and an altitude of 2 m is inclined 45o from the vertical with vertex pointing upward. The base of the gate is 2.70 m below the surface of oil (s = 0.80). What normal force must be applied at the vertex of the gate to open it? Show figure