The following are the results of a consolidation test on a sample of a clayey soil. • Plot the e-log o curve. • Determine the pre-consolidation pressure. • Calculate the compression index, C, and the ratio of Cs /Ce. Pressure, o' (kN/m2) 1.113 25 1.106 50 1.066 100 0.982 200 0.855 400 0.735 800 0.63 1600 0.66 800 0.675 400 0.685 200

The following are the results of a consolidation test on a sample of a clayey soil. • Plot the e-log o curve. • Determine the pre-consolidation pressure. • Calculate the compression index, C, and the ratio of Cs /Ce. Pressure, o' (kN/m2) 1.113 25 1.106 50 1.066 100 0.982 200 0.855 400 0.735 800 0.63 1600 0.66 800 0.675 400 0.685 200

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter11: Compressibility Of Soil

Section: Chapter Questions

Problem 11.4P

See similar textbooks

Similar questions

For a given consolidated clay: Gs= 2.71; LL= 45; In situ average effective overburden pressure = 120 kPa; In situ void ratio= 0.80 ; Thickness of clay layer = 4m ; average increase of effective stress on clay layer= 40 kPa; Effective pressure at the mid-height of clay layer= 60 kPa; Swell Index (Cs)= 1/5 Cc. Compute the pre-consolidation pressure in kPa. Show free body diagram a.92.9 b.100.5 c.49 d.87.64
Soil Mechanics An embankment consists of clay fill for which c′ = 25 kN/m2 and φ = 27° (from consolidated undrained tests with pore-pressure measurement). The average bulk unit-weight of the fill is 2 Mg/m3. Estimate the shear-strength in kPa of the material on a horizontal plane at a point 20 m below the surface of the embankment, if the pore pressure at this point is 180 kN/m2 as shown by a piezometer. a. 133 b. 100 c. 166 d. 200
A soil profi le consists of a clay layer underlain by a sandlayer, as shown in Figure P7.17. If a tube is inserted intothe bottom sand layer and the water level rises to 1 mabove the ground surface, determine the vertical effective stresses and porewater pressures at A, B, and C. IfKo is 0.5, determine the lateral effective and lateral totalstresses at A, B, and C. What is the value of the porewater pressure at A to cause the vertical effective stressthere to be zero?
Consolidation of an undrained clay occurs at an effective pressure of 100 kPa and a shear stress of 40 kPa. The ratio of effective pressure to shear stress in drained clay is 2 to 1. If the shear stress at zero effective pressure, To, is 10 kPa, what is the pore water pressure at failure? A. 10 kPa в. 40 кра с. 53 кра D. 67 kPa
Give the correct option In a drained triaxial test on consolidated clay the stress and angle are as follows: Deviator stress is 20 lb/in2 and friction angle is 21°. Calculate the effective confining pressure at failure?a) 21 lb/in2 b) 22.2 lb/in2 c) 25.4 lb/in 2 d) 17.9 lb/in2
A rectangular footing (4.14 x 4.43 m) is placed 1.38 m below the ground surface. The soil arrangement is composed of sand (ground) for the first 6.29 m and followed by clay for the next 5.94 m. The force acting on the footing is 10581 kN. Determine the resulting stress increase at the midheight of the consolidating layer in kPa. Assume 2V:1H pressure diagram. Unit weight of sand = 16.8 kn/m3. Unit weight of clay = 18.4 kn/m3
A granular soil is subjected to a minor principal stress of 200 kN/m2. If the angle of internal friction is 30°, determine the inclination of the plane of failure with respect to the direction of the major principal stress. Show free body diagram. a.30 b.45 c.60 d.37.5
A specimen of saturated sand was consolidated under an all-around pressure of 105kN/m2.The axial stress was then increased and drainage was prevented.The specimen failed when the axial deviator stress reached 70 KN/m2.The pore water pressure at failure was 50 KN/m2.Determine:i. Consolidated-undrained angle of shearing resistance, ɸii. Drained friction angle, ɸ′iii. Sketch Mohr’s circles and Failure Envelops in terms of total and effective stress.iv. Assuming soil specimen to be homogenous, sketch a network of failure planes.
A rectangular footing (4.89 x 4.38 m.) is placed 1.21 m. below the ground surface. The soil arrangement is composed of sand (ground) for the first 6.52 meters and followed by clay for the next 6.98 meters. The force acting on the footing is 10,293 kN. Determine the resulting stress increase at the midheight of the consolidating layer in kPa. Assume a 2V:1H pressure diagram. Unit weight of sand = 16.1 kN/m3. Unit weight of clay = 18.7 kN/m3. Use stored value. Answer in five decimal places.
For a given consolidated clay: Gs= 2.71; LL= 45; In situ average effective overburden pressure = 120 kPa; In situ void ratio= 0.80 ; Thickness of clay layer = 4m ; average increase of effective stress on clay layer= 40 kPa; Effective pressure at the mid-height of clay layer= 60 kPa; Swell Index (Cs)= 1/5 Cc. Compute the pre-consolidation pressure in kPa. a. 92.9 b. 49 c. 87.64 d. 100.5
A)Plot graphically all the vertical stresses, pore water and effective vertical stresses throughout the depth. B)How would the effective vertical stress value at the midpoint of the clay layer change if the groundwater level increased 2 m? (g = 10 m / s2)
Refer to Problem 6.1. Using Eqs. (6.3) and (6.29), estimate the average stress increase (Δσav) below the center of the loaded area between depths of 3 m and 6 m. 6.1 A flexible circular area is subjected to a uniformly distributed load of 150kN/m2 (Figure 6.2). The diameter of the load area is 2 m. Determine the stress increase in a soil mass at points located 3 m below the loaded area at r = 0. 0.4 m, 0.8 m, and 1 m. Use Boussinesq’s solution. Figure 6.2 Increase in pressure under a uniformly loaded flexible circular area