The internal energy of air is given, at ordinary temperatures, by u = u, + 0.718t where u is in kJ/kg, u̟ is any arbitrary value of u at 0°C, kJ/kg and t is temperature in °C. Also for air, pv = 0.287 (t + 273), where p is in kPa and v is in m³/kg. (i) An evacuated bottle is fitted with a valve through which air from the atmosphere, at 760 mm Hg and 25°C, is allowed to flow slowly to fill the bottle. If no heat is transferred to or from the air in the bottle, what will its temperature be when the pressure in the bottle reaches 760 mm Hg ? (ii) If the bottle initially contains 0.03 m³ of air at 400 mm Hg and 25°C, what will the temperature be when the pressure in the bottle reaches 760 mm of

The internal energy of air is given, at ordinary temperatures, by u = u, + 0.718t where u is in kJ/kg, u̟ is any arbitrary value of u at 0°C, kJ/kg and t is temperature in °C. Also for air, pv = 0.287 (t + 273), where p is in kPa and v is in m³/kg. (i) An evacuated bottle is fitted with a valve through which air from the atmosphere, at 760 mm Hg and 25°C, is allowed to flow slowly to fill the bottle. If no heat is transferred to or from the air in the bottle, what will its temperature be when the pressure in the bottle reaches 760 mm Hg ? (ii) If the bottle initially contains 0.03 m³ of air at 400 mm Hg and 25°C, what will the temperature be when the pressure in the bottle reaches 760 mm of

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Assume 2.5 kg/s of fluid enter a steady-state, steady-flow system with pressure p1 = 700 kPaa, density ρ1 = 3.2 kg/m3, velocity v1 = 30 m/s, specific internal energy u1 = 1 856.8 kJ/kg, and leave with p2 = 138 kPaa, ρ2 = 0.81 kg/m3, v2 = 150 m/s and u2 = 1 810.4 kJ/kg. During passage through the open system, each kilogram rejects 23.2 kJ of heat. Find the power in kW. (whole number)
Assume 2.5 kg/s of fluid enter a steady-state, steady-flow system with pressure p1 = 700 kPaa, density ρ1 = 3.2 kg/m3, velocity v1 = 30 m/s, specific internal energy u1 = 1 856.8 kJ/kg, and leave with p2 = 138 kPaa, ρ2 = 0.81 kg/m3, v2 = 150 m/s and u2 = 1 810.4 kJ/kg. During passage through the open system, each kilogram rejects 23.2 kJ of heat. Find the power in kW.
Assume 2.30 lb/sec of fluid enter a steady-state, steady-flow system with P₁ = 105.73 psia, P1 = 0.324 lb/ft³, v₁ = 92.08 fps, u₁ = 792.25 BTU/lb, and leave with P2 24.04 psia, p2 = 0.113 lb/ft³, v₂ = 484.46 fps, and u₂ = 761.10 BTU/lb. During the passage through the open system, each pour rejects 11.7 BTU of heat. Determine the work in hp.
A thermodynamic steady flow system receives 4.56kg per min of fluid where P1=137.90 KPa,V1=0.0388M^3kg, V2=122M/s, and U1=17.16KJ/Kg. The fluid leaves the system at a boundary where P2=551.6KPa, V2=0.193 M^3/kg, V2=183M/s and U2=52.80 KJ/kg. During passage through the system the fluid receives 3,000J/s of heat, determine the work.
Air flows steadily through an engine at constant temperature, 127 deg C. Assuming that the Kinetic and Potential energies are negligible and if the exit pressure is one-fourth of the initial pressure, in which the initial pressure is 702 kPa, the work per mass is Answer kJ (nearest whole number).
As measured by NASA’s Viking landers, the atmosphereof Mars, where g ≈ 3.71 m/s 2 , is almost entirely carbondioxide, and the surface pressure averages 700 Pa. The temperatureis cold and drops off exponentially: T ≈ T o e - Cz ,where C = 1.3E-5 m - 1 and T o = 250 K. For example,at 20,000 m altitude, T ≈ 193 K. ( a ) Find an analyticformula for the variation of pressure with altitude.( b ) Find the altitude where pressure on Mars has droppedto 1 pascal.
A quantity of gas (mean molecular weight 36.2) is compressed according to the law pvn = constant, theinitial pressure and volume being 1.03 bar and 0.98 m3 respectively. The temperature at the start of compression is 17°C and at the end it is 115°C. The amount of heat rejected during compression is 3.78 kJ,cp= 0.92. Calculate :(i) Value of n, (ii) Final pressure, (iii) Change in entropy.
1. Graph this, 0.25kg/s of Carbon Dioxide (R = 0.1889 kJ/kg-K, k = 1.289) undergo a certain process in a close system from initial volume and temperature of 268cm3 and 134K to a final volume and temperature of 804cm3 and 402K respectively. From the data given, perform necessary analysis in determining the type of process to further solve the following questions as follow: a. Work done by/on the system (kJ/s) b. Change in Entropy (kW/K) c. Heat added/rejected by the system (kJ/s)
A balloon filled with helium (of density ρHe = 0.164 kg/m3 ) has a cube shape and rises through the stratosphere. Air density is given by ρ(z) = ρa exp(− gz/ RT), where ρa = 1.225 kg/m3 is the density of air at the sea level, g = 9.81 m/s^2 is the gravitational acceleration, R = 287.06 J/kg/K is the specific gas constant of air, and T is the air temperature, which is constant in the stratosphere and equal to 217 K (Note that this expression for the atmospheric density is strictly correct only in the isothermal region of the stratosphere. However, please use it for solution to this problem). This balloon is designed so that ρHe and its side length h = 30 cm remain constant for all z. The lower surface is located at z and the upper surface at z + h. Derive an expression for the buoyancy force on the balloon and compute the maximum altitude to which the balloon rises in a unit of m.
Use the deal gas law to find the temperature rise/drop in the air (M = 18.57 kg/kmol) for the constant pressure from the atmospheric conditions (p = 100 kPa, T = 15 degrees Celsius) To v2 = 0.6 m^3/kg The universal gas constant is 7.123 kj/kmol K 0 degrees Celsius = 273.16 K
The fuel consumption of an automobile is 14 km/ L.The fuel consumption, in miles per gallon, is?
10. A thermodynamic steady flow system receives 4.56 kg per min of a fluid where, P1=137.90 kPa, v1=0.0388 m^3/kg, ϑ1=122 m/s, and u1=17.16 kJ/kg. The fluid leaves the system at a boundary where P2=551.6 kPa, v2=0.193 m^3/kg, ϑ2=183 m/s, and u2=52.80 kJ/kg. During passage through the system the fluid receives 3000 J/s of heat. Determine the work in kJ/min.