The jet stream exits a rocket motor at M=2.8 and atambient pressure, and strikes a two-dimensionalwedge with a total wedge angle of 40 deg as shownin the figure.1. sketch the initial (incident) wave pattern thatresults from the jet stream striking the wedge,2. show the additional wave pattern formed bythe interaction of the initial wave system withthe free boundary,3. mark the flow direction in the region followingeach wave form and show what happens to thefree boundary,4. compute the Mach number and direction of theflow after the air jet passes through eachsystem of waves,5. attempt to sketch a pressure-deflectiondiagram4020 6Free BoundaryPamb=14.7 psia

Name: The jet stream exits a rocket motor at M=2.8 and atambient pressure,
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: The jet stream exits a rocket motor at M=2.8 and atambient pressure, and strikes a two-dimensionalwedge with a total wedge angle of 40 deg as shownin the figure.1. sketch the initial (incident) wave pattern thatresults from the jet stream striking t

As per Bartleby guidelines, we need to answer only 3 parts of the question. I have solved four parts…

Answered: The jet stream exits a rocket motor at…

Engineering

Mechanical Engineering

The jet stream exits a rocket motor at M=2.8 and at ambient pressure, and strikes a two-dimensional wedge with a total wedge angle of 40 deg as shown in the figure.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Water, issuing vertically from a nozzle having a diameter of 25 mm, flows out under a head of 30 m. If C = Cv = 0.98, determine at what constant height could the jet of water support a load of 200 N vertically from the nozzle tip?
A uniform tube is used to siphon water from the large tank. If the pressure on the outside of the tube (the atmospheric pressure) is more than 20 kPa greater than the pressure within the tube, the tube will collapse. By using Bernoulli's equation, determine the minimum value of h allowed without the siphon collapsing. The density of water is 1000 kg/m3. Hint: Since the tube is uniform the flow speed in it is constant. The exiting flow from the tube is treated as free jet. 2 m V SARA 1 4 m
A horizontal nozzle discharges water into the atmosphere as shown in the figure. the relative pressure at point 1 equal to ?1 = 18 ??? . A. A Pitot tube connected to a mercury manometer is inserted into the flow. in the area section A1 indicating a height difference ℎ = 0.01 m. For this reading indicated in the Pitot tube, determine the velocity in the A1 area section of the nozzle. B. For the dimensioning of the anchor block it is necessary to determine the force that the nozzle applies over the fluid. Calculate the component of this force in the x direction. Data: ?1 = 0.070 ?; ?2 = 0.060 ?; ? = 30°; ??? = 13.6
Neglecting head losses, determinewhat horsepower the pump must deliver toproduce the flow as shown. Here theelevations at points A, B, C, and D are 110 ft.200 ft, 110 ft and 90 ft, respectively. The nozzle area is 0.10 ft2
A 3-in-diameter horizontal water jet having a velocity of 90 ft/s strikes a curved plate, which deflects the water 180° at the same speed. Ignoring the frictional effects, determine the force required to hold the plate against the water stream.
A jet of water 251.70 mm in diameter impinges normally on a flat steel plate. If the discharge is 0.491m3/s. If the plate is moving at 2. 17 m/s in the same direction as that of the jet, determine the force on the plate Group of answer choices 7.38 3.25 3.78 5.23
Show that the quantity of water flowing across a triangular V-notch of angle 2θ isQ = Cd(8/15)tan (θ/2)(2g)1/2H 5/2 . Find the flow if the measured head above the bottom of the V is 70cm,when θ =120 o and Cd = 0.6.
The equation of a wave in the international system SI, which propagates by a string is given by the expression: y(x,t)=0,08cos[2π(2x-4t)] Determine the velocity values at a point 2m from the source at the instant t=5s.
In the dam shown in the figure, the water flows at the entrance of the conduitwith a speed of 0.4 m/s and exits at 9.5 m/s the generator building, 175 m belowof the socket Considering that the temperature of the water in the dam is 28 °C andthat the gravitational acceleration of the place is 9.78 m/s2 , determine:a) The pressure difference between the outlet and the inlet of the intake.b) The diameter of the duct at the outlet connected to the generator building, if theinput area in the socket is 0.7 m2. .
A wave with a period T = 10 seconds is propagated shoreward over a uniformly sloping shelf from a depth d = 656 ft to a depth d = 9.8 ft. Find the wave celerities C and lengths L corresponding to depths d = 656 ft and d = 9.8 ft
A horizontal nozzle discharges water into the atmosphere as shown in the figure, being the relative pressure at point 1 equal to p1 = 20 kPa A Pitot tube connected to a mercury manometer is inserted into the flow in area section A1 indicating a height difference h = 0.02 m. For this reading indicated in the Pitot tube, determine the speed in the Area A1 section of the nozzle. For docking block sizing it is necessary to determine the force that the nozzle applies to the fluid. Calculate the component of this force in the x direction. Data: D1 = 0,075 m; D2 = 0,055 m; θ = 30° ; dHg = 13,6.
At what speed will the torpedo cavitate when running at a depth of 12 m? and At what depth should it be to avoid cavitation at 25.5 m/s?