The maximum dry unit weight determined in the laboratory for a quart sand is 102 lb/ft3. In the field, the relative compaction is 90%. Specific Gravity of Sand is 2.70. Determine the void ratio at the maximum dry unit weight condition. Determine the void ratio of the sand in the field condition. Determine the hydraulic conductivity of the sand in the field condition if the hydraulic conductivity of the sand at the maximum dry unit weight condition is 0.30 cm/sec. Using Kozeny-Carman equation.

The maximum dry unit weight determined in the laboratory for a quart sand is 102 lb/ft3. In the field, the relative compaction is 90%. Specific Gravity of Sand is 2.70. Determine the void ratio at the maximum dry unit weight condition. Determine the void ratio of the sand in the field condition. Determine the hydraulic conductivity of the sand in the field condition if the hydraulic conductivity of the sand at the maximum dry unit weight condition is 0.30 cm/sec. Using Kozeny-Carman equation.

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter7: Permeability

Section: Chapter Questions

Problem 7.16P

See similar textbooks

Similar questions

A sand with Gs= 2.66 and void ratio e=0.60 is completely dry. It been becomes wetted by a rising groundwater table. Compute the unit weight in KN/cu.m. under the following conditions:a) When the sand is completely dryb) When the sand is 40% saturatedc) When the sand is completely saturated
The degree of compaction of sand in the field is 93.5%. Considering a dry specific weight maximum “γd max” and minimum “γd min” (see Table 1) of this sand determine the dry specific weight in field and its relative compression compactness.
The max and min dry unit weights of sand were determined in the laboratory to be 18.31KN/M3 and 15.25KN/M3 respectively.Determine the dry unit weight in the field if the relative density is 0.64.
The relative compaction of a sand in the field is 92%. The maximum and minimum dry unit weights of the sand are 16.2kn/m^3 and 14.6Kn/m^3, respectively. For the field condition, determine a. Dry unit weight b. Relative density of compaction c. Moist unit weight at a moisture content of 12%
2. Situation 2 - For a constant laboratory permeability test on a fine sand, the following data are given: Length of specimen = 16 cm Diameter of specimen = 96 mm Constant Head Difference = 50 cm Volume of water collected in 4 min = 420 cc Void ratio of the soil specimen = 0.55 a. Determine the hydraulic conductivity of the soil in m/min. Round off to four decimal places. b. Determine the discharge velocity in m/min. Round off to four decimal places. c. Determine the seepage velocity in m/min. Round off to four decimal places.
The relative compaction of a sand in the field is 90%. The maximum and minimum dry unit weights of the sand are 17 kN/m3 and 14.5 kN/m3, respectively. For the field condition determine the dry unit weight
A 75 mm diameter and 150 mm high clay specimen has a mass of 1392.5 g. When it is dried, the mass becomes 1196.5 g. Find the degree of saturation in the specimen, assuming the specific gravity of the soil grains is 2.70. Show handwritten solution.
At 0.45 porosity the hydraulic conductivity of the sand is 0.010cm/sec.what is the hydraulic conductivity at n=0.50
A wet sand sample has a volume of 4.64 x 10-4 m3 and weighs 8N. After oven-drying, the weight reduces to 7.5N. Don't assume the value of Gs.Calculate the following: a. Void ratio b. Degree of saturation.
A loose compacted sand fill is 1.80 m in depth and has a relative density of 40%. Laboratory tests indicated that the sand's minimum and maximum void ratios are 0.46 and 0.90 respectively. The specific gravity of the solids of the sand is 2.65. Find; (a) Dry unit weight of the sand. (b) Void ratio of the sand having a relative density of 40%. (c) If the sand is compacted to a relative density of 75% what is the decrease in the thickness of the 1.8m fill?
8. The max and min dry unit weights of the sand were determined in the laboratory to be 16.5 kN/m3 and 14.6 kN/m3 respectively. The relative density of compaction in the field of the same sand is 70%. What is the relative compaction? (Ans: 96%) What is the dry unit weight? (Ans: 15.84 kN/m3 ) What is the moist unit weight at a moisture content of 10%. (Ans: 17.42 kN/m3 )
A sample of soft saturated clay has a volume of 100cu.m. and weighs 175 gr. If the oven dry unit weightis 120 gr.a) Compute the water content of clayb) Compute the void ratio of the clayc) Compute the sp.gr. of the clay